Your cart is empty.
Your cart is empty.10" Laminated Assembly for Finish Mower 2 PACK - Fits 3/4" Axle - 3.5" Wide - 10" Diameter - 3.25 Centered Hub - 1" Yoke Diameter - 9 1/4" Yoke Length - Greaseable - Will Not Rust! - 2 PACK Flat Free Laminated Tire! Will fit most major brands. COMPLETELY ASSEMBLED AS SHOWN IN PICTURE
DubyaDeeBee
Reviewed in the United States on February 5, 2025
The original wheels on my Bush Hog finish mower wore out. These are much heavier duty than the OEM wheels. The yokes are made of thicker steel and the wheels are much sturdier, similar to the wheels on my field brush mower. Got a discount on signing up for Prime when I bought them that was more than the cost of a year's Prime subscription. Guess that downside is that was 3 years ago and for 2 years I've continued to pay for Prime membership. If you use Prime enough, for someone like me living 15 miles from the closest town with significant shopping, the cost of membership is offset to some extent by need for fewer trips to town.
TD
Reviewed in the United States on April 5, 2025
Perfect. Good quality.
Customer
Reviewed in the United States on July 3, 2024
I used these caster wheels on my bush hog and they fit perfect! They are very heavy duty. I am very please with the purchase.
Bruce S.
Reviewed in the United States on June 2, 2024
These wheel sets fit my Landpride AT2572 just perfectly. The adjustment spacers are also perfect. The rubber part of the wheels seems to be rugged time will tell but I am thinking they will last quite awhile. I think that the price that includes the spindles is very good. I have massing around with different flat free tires all of which turned out to be a waste of money. This maybe the best way to go!!
Monty Wilson
Reviewed in the United States on December 4, 2024
The price for the two of these was very reasonable. It not only has the wheels, it has the entire assembly with spacers. I like the wheels are made like a bush hog tire and should last longer than my last solid wheels.
George
Reviewed in the United States on March 9, 2023
2 received in the pack as promised. Assembled with out a problem to my Bush Hog finishing mower. Unit needs to be greased up as normal. All needed components included (including spacers & retaining clip). Rubber wheel is made of sections of rubber that seem to be vulcanized together to form the tire. Nice finishing touch - zerk has a small dust cap. It looks like they will hold up. Based on my initial use I anticipate I will purchase another pair when my current old wheels on the front wear out. All the best and thanks for these wheel assemblies.
Paul E. Fox
Reviewed in the United States on December 2, 2023
I used these to replace the pneumatic wheels and tires on a 3 point hitch mounted 5 foot cut finish mower. They work perfectly and fit without modification.
VR
Reviewed in the United States on April 6, 2020
I have a pretty new Kioti Finish Mower deck and ALL of the wheels are falling apart. Big chips in the rubber wheels and one actually broke off the rim. (pretty disappointed with the manufacturer on that one) Otherwise the mower deck is pretty good.The wheels on the mower deck are 8 inches high and rated at 300KG per wheel. I had decided there is no way i was going to replace the 2 year old wheels with the same thing since they failed with hardly any use (under 50 mows). I was concerned that a 10 inch wheel would not fit the machine correctly and would hit the deck while turning or backing up.I gave these a try.The fit and have clearance to fully rotate. Tested them on over 15 acres of grass. No problems. No divets/tracks. That the good.The bad. My deck has bushings that the wheel shafts need to fit in. The bushings are pretty tight tolerances. One of the shafts was deformed by around 1/32nd of an inch where the securing pin passes through. I had to grind it down a little bit to get it to fit. The other shaft was just fine. Since you cannot easily put this thing on a lathe to true it up, you need to be somewhat careful in doing this work. Overall this was a pretty minor flaw but something the manufacturer should pay closer attention to. It did add about 1 hour to the installation task. The second one took only 5 minutes because it did not have the same problem.Manufacturer.. if you are reading. QA should do a test fit in a receiver that has top and bottom bushings and a grease fitting in the middle. That simple test would have probably failed and would only take like a few seconds to do before welding up the wheel assembly... and more importantly, while it is trivial to fix.Update----------------I ordered a second pair of these and had the same issue I had with the first. One was not entirely straight. It was very very close and has since worked/worn itself in so that it spins like it should. The first pair was worked flawlessly since they worn in. No issues in over two years. The tires I replaced were destroyed in less than two years....so these are way better than the originals.
Recommended Products
$189.99
$ 80 .99 $80.99