Your cart is empty.
Your cart is empty.Product Description
This part is used in 19 model(s):
20330 (22in Recycler Lawn Mower), 20330C (22in Recycler Lawn Mower), 20331 (22in Recycler Lawn Mower) 20331C (22in Recycler Lawn Mower), 20339 (22in Recycler Lawn Mower with SmartStow), 20339C (22in Recycler Lawn Mower with SmartStow), 20350 (22in Recycler Lawn Mower), 20351 (22in Recycler Lawn Mower), 20361 (Flex-Force Power System 60V MAX 22in Recycler Lawn Mower), 20361T (Flex-Force Power System 60V MAX 22in Recycler Lawn Mower), 20370 (22in Recycler Lawn Mower), 0371 (22in Recycler Lawn Mower), 20377 (22in Recycler Lawn Mower), 20378 (22in Recycler Lawn Mower), 20379 (22in Recycler Lawn Mower), 20954 (55cm Recycler Lawn Mower), 20959 (55cm Recycler SmartStow Lawn Mower), 21329 (22in Recycler Lawn Mower with SmartStow), 21761 (55cm Recycler SmartStow Lawn Mower).
Easy to install and use
1 Removed rear wheels
2 Removed rear wheel adjusters
3 Removed broken baffle replaced with new
Fit like a glove , parts arrived very quickly, very happy with the whole process
Product size
Top length: 17 inches
Bottom length: 17-11/16 inches
Height: 5-1/4 inch
Function
It is designed to lessen the number of stones and other rubble from being flung backwards towards the operator. The shield is also an important safety feature that helps to lessen the likelihood of your foot accidentally contacting the blade.
Estevan M.
Reviewed in the United States on January 5, 2025
Fits perfectly on my toro 22 in. mower.
William K.
Reviewed in the United States on August 27, 2024
I got this to replace the missing flap on a 2008 Toro Recycler I pulled out of someone's trash. The mower's fully operational and the new flap makes it safe to use. Installation was pretty simple. Time will tell how long the flap will last, but I'm just glad to have the mower in a usable state.
Noreegret
Reviewed in the United States on July 16, 2024
The plastic itself will likely just last one season. Very flimsy.The provided screws are just about the same size as the tube, so doesn’t hold the bar on. Also the anchors are same size, so the screw tends to push the anchor deeper and won’t catch.I used some bolts and a washer to secure better. But due to the cheap flimsy quality plastic, still give it one star.
Royce
Reviewed in the United States on May 13, 2024
The actual item seems fine, I haven’t actually run the mower with it on yet - the mounting hardware could be improved - I had to rig something together with washers and wall anchors (my hardware only came with one anchor) seems like it would be easy to improve this.
Pepe the Programmer and More
Reviewed in the United States on December 5, 2024
The factory supplied shield on the Toro model that I own is "fastened" in place with some kind of plastic expansion anchor that I couldn't budge with pliers. I finally used a bolt cutter to take off the head of each side's anchor. The end shown in my attached picture fits through a hole in the plastic body part of the mower. You flex the shield in order for it to bend so that you can get the ends of the new shield into the holes. What annoys me is that the supplied anchors simply spin inside the holes of the shield ends. Also the screw head slips right through the hole. Even if the anchors were sized correctly, the screws and the anchors don't DO anything - they don't secure the shield. Therefore I plan to not use anything to attach the shield. If it snags on something on the ground while mowing the entire shield should just pop off without damage and I can put it back on. The grade of plastic is quite a bit less substantial than the Toro OEM so likely will not last as long. But it's a cheap replacement.
Joseph
Reviewed in the United States on November 29, 2024
Works as it should
Debbie Bolton
Reviewed in the United States on October 24, 2024
Easy to use
ALBERT WILKINSON
Reviewed in the United States on October 21, 2024
Works fine, providing you are capable of modifying if needed.
Recommended Products
$104.26
$ 46 .99 $46.99