Shopping Cart

Your cart is empty.

Your cart is empty.

1/4” NPT Pneumatic Solenoid Valve DC 12V Air Solenoid Valve 2-Position 5-Way Connection Type Electric Valve Out of Line with Accessories (DC12V,4V210-08,Out of Line)

4.9 (3) Write Review
Free shipping on orders over $29.99

$14.88

$ 7 .99 $7.99

In Stock

About this item

  • 【Product Details】IGOYE DC 12V 4V210-08 is a single coil pilot-operated 2 position 5 way solenoid valve (Out of line),interior contains pneumatic fittings.
  • 【Product Size】The outlet, inlet are 1/4" NPT the exhaust is 1/8" NPT. The included accessories can be used directly with 1/4" (6mm) air tubing.
  • 【High Performance】Our internal pilot operated solenoid valves are stable and responsive, with a maximum operating frequency of 5 times per second.
  • 【Operational Parameters】The operating pressure range is 0.15-0.8Mpa (21-114Psi), with a maximum pressure of 1.2Mpa (170Psi). The operating temperature range is -5-60°C (23-140°F).
  • 【Installation Precautions】During installation, ensure to prevent dust and pay attention to the direction of airflow in and out as marked on the product. Install the product correctly.


Product Description

Solenoid valve
Solenoid valve
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Solenoid valve
Solenoid valve

Solenoid Valve Installation Instructions

  • Clean and flush the impurities in the pipeline before installation to prevent debris from falling into the pipeline to block the solenoid valve
  • Installation should pay attention to the installation direction, to make the ring flow direction and the arrow on the valve body in the same direction.
  • If the start-up system contains directional pressure, check valves should be installed in the system to prevent damage caused by reverse pressure
  • Installation needs to be installed horizontally to ensure the safe use of solenoid valves and to ensure that the service life of the solenoid valve
  • When connecting the solenoid valve should be firmly connected to ensure good contact, incorrect connection will cause the solenoid valve does not work
  • Long-term suspension after re-use need to pay attention to the solenoid valve cleaning
Solenoid valve

Cecil U.
Reviewed in the United States on March 26, 2025
As ordered
Richard Smith
Reviewed in the United States on March 26, 2025
The solenoid on the version I used operates on 24V and was easily controllable with a wireless remote for Halloween and other props. This model is setup for 1/4" fittings. Overall this solenoid performed exactly as intended and should work for any other solution needing a compatible solenoid.
Nick Papagiorgio
Reviewed in the United States on October 21, 2024
I haven't permanently installed this solenoid yet, but I did hook it up to an existing set-up and it is working exactly as expected.I used these for pneumatic-powered low pressure Halloween props. In my set-up, I tested this solenoid at 40psi in connected to an electronic controller with with a motion sensor. The solenoid performed perfectly, so I am confident it will work exactly as I'd like for a future prop.Fairly priced and works as expected. Easy to recommend.