Your cart is empty.
Your cart is empty. Magnetic Hex Nut Driver Master Kit, Cr-V Steel | 1/4" Quick-Change Hex Shank | SAE & Metric | 12-Piece Power Nuts
Driver Drill Bit Tools Set
1/4" magnetic nut setter can be used with an impact/drill bit driver or an inner hexagonal ratchet, which can firmly
grasp the hexagonal nut and fasteners for easy installation or loosening/removal.
DAVID C. PALMER
Reviewed in the United States on February 4, 2025
Well, Built
Customer
Reviewed in the United States on February 2, 2025
awesome
Liam
Reviewed in the United States on January 4, 2025
Exactly what I was buying and works as intended
J. Bruha
Reviewed in the United States on January 21, 2025
This is a nice set of impact rated nut drivers, I got this over other sets because they come in a nice little organizer box with latching lid, and they go up to 9/16 in size, which I use from time to time, but is seldom included in nut driver sets. Quality is good for a generic set, the magnets hold well enough for their use, and can be removed with a little effort if you don't like the magnet. One thing I might add, if you use bolts with a deep head and the head of the bolt hits the magnet before it seats fully onto the driver, you can (very carefully) tap the magnet just a little deeper with a punch and hammer. If you do this, do it carefully so as not to drive the magnet too deep. I thought this was worth mentioning, as some nut drivers have the magnet 'bottomed out' in the driver, and if the bolt heads won't fully seat, there isn't anything you can do about it.Overall, a nice set in a nice box. I like how both the metric and SAE are in the same set, as I have a few things that are of the age where they have both, and it saves me digging out 2 sets.
harris
Reviewed in the United States on May 30, 2023
Perfect tools for what I need.
Mario
Reviewed in the United States on November 11, 2023
Es buen producto, el único problema es que el imán que trae los bits se sale y se pierde
Customer
Reviewed in the United States on February 11, 2020
I bought this set because it included a 9/16" socket. Most sets only got to 1/2". However when I tried to use the 9/16" socket on several nuts, it would not fit over the nut. I used my caliper to measure across the flats and got 0.55". It is supposed to be at least 0.5625". I tried the 14 mm socket and it actually worked on some of the nuts, but not all. The 14 mm is supposed to be 0.5512 which is smaller than the 9/16", but in this case isn't. I measured the rest of the sockets and they should all be fine. Since I ordered this specifically for the 9/16" and it doesn't fit, I had to return the whole set.
kevin lopez
Reviewed in the United States on January 14, 2020
Es muy bueno el producto
Recommended Products
