Your cart is empty.
Your cart is empty.Product Description
- 1)Assemble the doorbell and along the wall from the socket without existing doorbells or wires. Easy to install and able to set up in minutes.
- 2) Connected through a doorbell transformer, it is best to use it together with the product battery to maintain operation even in the event of a power outage of 120.
- 3) The doorbell transformer does not have a battery. AC120V main power supply is required.
- 4) The doorbell transformer can only supply power and cannot charge the battery.
- 5) The doorbell transformer is suitable for all doorbells with an input of 8-24V. Please follow the instructions on the doorbell.
- 6) If it is found that it is not charged, please check if the 120V voltage connected to the doorbell transformer is normal? Check if the interface connecting the doorbell is loose?
- FOR DOORBELLS
- 1）Keep adapter unplugged
- 2）Install wires from 18 volt adapter into the terminals for your doorbell unit (any wire can be connected to any terminal)
- 3）Plug adapter into outlet
- 4）Put doorbell face plate on housing unit
- 5）Power up and verify your doorbell is receiving necessary power using the accompanying application
Continuous power supply
It can be continuously Power supply your device without worry about taking off the doorbells/ thermostats and low battery, which is time-saving and effort-saving.
Easy to Install
1.Keep adapter unplugged.
2.Install wires from 18volt adapter into the terminals for your doorbell unit (Simply attach the two rings to the doorbell and tighten the screws, regardless of positive or negative polarity)
3.Plug adapter into outlet.
4.Power up and verify your doorbell is receiving necessary power using the accompanying application.
No worries about power failure
Provide continuous power to your device so that the video doorbell can run continuously without interruption.
Specifications
- Input voltage: 100-240VAC, 60 hz,
- Output voltage: 18VDC, 1000 mA,
- Dimensions: 29.5 x 15 x 11 inches
- Cable length: 500 cm ( 196in)long enough to connect a socket and the doorbell.
Compatible with
- visual doorbell
- visual doorbell 2, 3, 3Plus, and 4
- Eufy Video Doorbell
- Ring Video doorbell
- Wyze Doorbell Pro
Wire Type: Stranded copper wire
- With an output voltage of 18VDC1A Sufficient power and current to power the doorbell, this adapter is perfect for power-hungry doorbell systems. It's capable of providing a stable and consistent supply of power to your doorbell system, ensuring optimal performance at all times. Plus, the adapter is equipped with a built-in protection system that shields your doorbell from surges and voltage fluctuations
- making it a safe and secure choice for your home.Thanks to its compact size and lightweight build, this doorbell adapter is easy to install and use. Simply plug it in and connect it to your visual doorbell, and you're ready to go. The adapter is also compatible with a wide range of doorbell systems, so you can rest assured that it'll work seamlessly with your setup.
R1ceBurner
Reviewed in the United States on February 1, 2025
I have this setup with my ring doorbell pro in a spot where there was no existing doorbell to wire the pro into. works well except i have to figure out how to hide the wire. very easy to setup and start using right away.
Kristinme83
Reviewed in the United States on November 29, 2024
I love this option! So much better than worrying if my solar panel is going to charge or get enough sunlight or even have enough wattage to actually charge my doorbell!I am able to plug this in right outside because there's an outlet next to our front door. The cord is plenty long enough that if needed I could snake the cord inside and plug it into an outlet in the wall inside.
Recommended Products