Your cart is empty.
Your cart is empty.Product Description
MAX.30,000RPM
Do not exceed a maximum speed of 30,000 RPM during operation
Thickness: 1/16"
The cutting wheel thickness is 0.06 inch
Features: durable and stronger
Dual-layer structure made of quality aluminum oxide combined with resin
Glenn
Reviewed in the United States on March 30, 2025
The 2-inch discs and mandrel fit together perfectly. I cut some galvanized nails and thin gage metal plate and I thought the discs did a good job and they didn’t wear down too fast. They are durable and while thin, they don’t snap or break apart. I believe that the reinforcement ring helps to prevent that from happening as well that these discs are constructed of multiple layers. I fell that these discs are good quality.I am a little confused as to the two different types of screws provided with this set. One screw has a piece on the screw that fits the hole in these discs perfectly at 9.5mm. The other screw does not have this and the only thing I can figure out about this is this other screw is in the event you should purchase 2-inch discs that only have a 6mm hole in the center. Of course, you may be able to use other accessories with these screws and mandrel too. So, you have one screw that fits 2-inch discs with a 9.5mm hole in the center and one screw that will fit 2-inch discs with a 6mm hole in the center. By-the-way, just to let you know, while 9.5mm is close to 3/8-inch, it is not the same. It is very close but 9.5mm is just a hair under 3/8-inch.
Jake C6R
Reviewed in the United States on March 28, 2025
For the price these are hard to beat. They come with a nice mandrel holder that works well with a corded or cordless drill or a die grinder. Nice quality and they cut and grind well. One thing I would like is if they had a shank that would fit a smaller rotary tool like a dremel. Otherwise very happy with them!
James G.
Reviewed in the United States on March 28, 2025
Fits any tool that can accept 1/4" inch shank. From drill to air grinder. Cutting discs have a reinforced ring that helps keep a hold and well as keep it sturdy. Works well enough to cut thin aluminum, Plexiglas and PVC. Came with shank two head screws and 14 discs. Worked well for my needs which was to cut rain gutters to needed size.
Shane Ravenbane
Reviewed in the United States on March 15, 2025
Reviewing: 2 Inch Die Grinder Cut-Off Wheel,15 Pack 2” Metal Cutting Discs 3/8in Arbor Hole,Steel Carbon PVC Cutter with 1/4in Shank Mounting Mandrel Holder Accessories for Air Grinders Drill Rotary ToolI have a fairly wide variety of carbide bits, burrs, discs, and pads for my die grinders, but it somehow never occurred to me to use cut-off wheels on them until I saw this set. It's fantastic. I've used it quite a bit already, and I really like it - it's great for getting into places where you just can't get with an angle grinder.So far, I have no complaints. This set is great. If any issues arise, I'll edit this review.
JAWs
Reviewed in the United States on April 7, 2025
These are good quality 2 inch die grinder cut-off wheels. They have extra reinforcement at the disk itself where it attaches to the mandrel and do indeed seem well constructed on the disks themselves.
Jim D.
Reviewed in the United States on April 5, 2025
I recently picked up a die grinder (Milwaukee M12) for a hobby metal shop and I've started to collect different attachments. These fit well and serve a nice purpose for smaller cut-off tasks that don't require the angle grinder. This is a nice set; it comes with a bunch of cut-off wheels and the base can be used for different size wheels depending on the screw you use.
natevw
Reviewed in the United States on April 3, 2025
The media could not be loaded.
Bydsniper
Reviewed in the United States on April 2, 2025
This tool can be better. The shank is ROUND instead of being hex shaped. You CANNOT TIGHTEN THE DRILL CHUCK TIGHT ENOUGH TO GRIP AND HOLD THE SHANK. THE DRILL JUST SPINS AROUND THE SHANK. IT HAS VIRTUALLY NO CUTTING ABILITY BECAUSE ANYTHING YOU TRY TO CUT WILL STOP THE CUTTING DISC FROM SPINNING. ON THE PLUS SIDE, IT LOOKS GOOD THOUGH AND COMES WITH TWO DISC MOUNTING SCREWS, AND A GENEROUS SUPPLY OF CUTTING DISCS.
Recommended Products