Shopping Cart

Your cart is empty.

Your cart is empty.

2 Pack Winding Rods with Random Antiskid Handle, Used for Garage Door Torsion Spring and Many More Black.

Free shipping on orders over $29.99

$15.29

$ 7 .99 $7.99

In Stock
  • Application - Used to wind and unwind the tension on torsion springs.
  • Dimension - Diameter 1/2" x length 16 3/4" and handle black.
  • Material - High strength 45# steel and appearance galvanized.
  • Benefit - Add a non-slip handle to enhance you safety.
  • Note - There may be embossed handle and rubber handle due to product replacement issues. Both styles are shipped at random.



Product Description

Product Description

Use for unwinding and winding torsion springs.

Torsion spring winding rods is constructed and appearance galvanized of hard drawn wire and come in 1/2", outside diameters about 18" lengths and non-slip handles prevent accidents.

Failure to use these rods when replacing or making adjustments to torsion springs may result in personal injury and property damage.

When adjusting or replacing garage door torsion springs, it is important that these tasks are not attempted with any other tools other than with these rods

Winding rods which are designed specifically for increasing (winding) and decreasing (unwinding) the tension on garage door torsion springs, and they are the only tools recommended for this purpose.

WARNING:

INCORRECT INSTALLATION OR DOOR POSITION CAN CAUSE INJURY.

dimensions

Dimensions

Torsion spring winding rods is constructed and appearance galvanized of hard drawn wire and come in 1/2", outside diameters about 18" lengths and non-slip handles prevent accidents.

Application

Used to wind and unwind the tension on torsion springs.

Benefit

Benefit

Add a non-slip handle to enhance you safety.

Safety first

Black rubber handle and embossed handle are shipped randomly without affecting use.


,Frank Sanders
Reviewed in the United States on July 12, 2024
The rods worked great. Buy with confidence. Very strong along with the perfect length. The job was a breeze.
Sky King
Reviewed in the United States on May 6, 2024
These were great! They were a good fit for 0.5 inch holes. The handles were easy to grip with the no-slip material! Watch the YouTube videos to see how to use them. Be sure to knock the bar a few times to spread out the garage door spring. Good luck!
Schwack_Daddy0
Reviewed in the United States on May 22, 2024
I bought these rods to tighten my garage door torsion springs. These rods worked very well, and the rubber grips really helped me with tightening the springs without losing my grip.While these rods were great, and definitely got the job done, I would highly recommend considering hiring a professional to tighten torsion springs on your garage door. While not technically complex, it was one of the scariest repairs I’ve ever done because if the springs break, I could lose an eye or worse. You’ll definitely need solid upper body strength to move the springs as well.
jees george
Reviewed in the United States on March 5, 2024
Strong,convenient grip good product good size well fitted in the groove.
Julant
Reviewed in the United States on March 18, 2024
These were used for a DIY garage spring replacement and they worked great.They have a good fit in the spring collars with no slop, so I felt very confident with each turn.The depth marker rings work nicely as a secondary check, but should not be the only thing relied on when working with potentially dangerous springs.The coated handles are great for use bare handed, but are a bit 'grabby' when using nitrile or other similar shop gloves.
Jesus Morales
Reviewed in the United States on March 16, 2024
This item is very good, it's strong and easy to use, it help me what I have to do on the garage door.I recommend it.
David
Reviewed in the United States on December 19, 2024
Thes worked great. Very little if any flex while tightening garage spring. Nice coating on the ends. I recommend.
Chad
Reviewed in Canada on January 7, 2024
Item is only roughly 16.5". Not 18" like product description says it will be.
AKO California
Reviewed in the United States on April 21, 2019
I'm not sure how often I'll need these in the future, but they worked just fine. I was able to use them to hold both springs in place while I leveled an uneven door. Then used them to adjust the tension since the door would raise about 4 feet from open if the emergency release was released. I could tell by feel of how much force it took to twist, that one was wound more than the other, so let that one off 1/4 or 1/2 turn. Now the door is even and also balanced.I will be using these to adjust a different door where the springs need to be adjusted to give more assistance.The grips happened to be really handy as I have a step ladder that has about a 1/2 inch hole in the shelf that I could drop one rod into while I used the other. The grip kept it from falling through the hole. Otherwise, I'm not sure how easy it would have been to put it down without it rolling off the stepladder shelf.I do agree with another reviewer that it would be nice if they fit tighter into the hole. They don't wobble in the hole, but they also are loose enough that if you lift the spring with one and aren't holding the other rod while sticking out of the bottom hole, it'll easily fall out of the hole. And if you're letting the bottom rod come against the door to hold the spring, you have to make sure there's enough pressure for it to hold. Can't get sloppy and let go too early.