Your cart is empty.
Your cart is empty.Product Description
20kg large torque
20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40mm*20mm*40.5mm(1.57inch*0.78inch*1.59inch).
All- metal gear
Full metal gear significantly improves servo’s accuracy and extend its service time.
180° rotation
Come with 2 metal servo horns and 2 metal brackets. 180 degrees rotation. Controllable angle range from 0 to 180 degrees.
Red metal shell
Red oxidation metal shell, strong heat dissipation ability,super cool appearance!
Jon Raybould
Reviewed in the United Kingdom on October 9, 2023
I have not used this servo in anything yet, but when connected to a servo tester, I can confirm that this servo is very very strong. It is well made, and came well packaged in its own custom box. Now, I just need to decide what I actually bought it for !
Ron C.
Reviewed in the United States on September 16, 2022
This is the second one I purchased. 1st one worked fine, no issues. 2nd one, missing hardware. Return it, received another. Same thing, no brackets, screws, etc.
Mike Mullarkey
Reviewed in the United States on January 2, 2022
The media could not be loaded.
Justin K
Reviewed in the United States on July 5, 2021
Fixed a weakness in my little robot with this stronger servo.
ダンペイ
Reviewed in Japan on May 24, 2019
arduinoで使用しました。 最初5vで動作させましたが動かない場合ありましたが、説明を読むと動作電圧6v～7.4vとなっていました。 7.2vでバッチリ動作するようになりました。
Neil Stevenson
Reviewed in the United Kingdom on February 9, 2019
Great servo for robotics projects, but need to be careful on how you intend to use it.Positives: strong, high torque. Comes with brackets and screws to attach body and shaft to whatever you need.Negatives: it has a high peak current (1A) on start and requires a minimum of 6 volts to operate reliably. In practice this means it won’t operate on 4xAA NiMH batteries as the peak current takes them down below 5 volts and it just twitches. Also, the wires come out on the spindle side, which means they could easily foul - why? The supporting spindle does not connect to the servo shaft and does not have ball bearings, so not sure how robust this will be.
strongman
Reviewed in the United States on October 8, 2019
The media could not be loaded.
Client d'
Reviewed in France on April 8, 2019
Déçu par le manque de description, je pensai avoir un double palonnier actionné par le moteur il n'en est rien un palonnier est entrainé par le servomoteur de l'autre coté c'est simplement un pivot fixe avec un palonnier fou dessus;
Stan
Reviewed in the United States on September 24, 2018
I like the fact that it comes with aluminum horns. I thought that both ends of the servo would move but the other end is just a stud.
hmx
Reviewed in the United States on August 1, 2018
The only complaint I have with this servo applies to just about every servo I have, I wish the wires weren't so close to the business end. Give this puppy 6V and you are good to go. Do not try to power this from your arduino/esp32/etc, not going to happen. Give it a separate power supply and to be on the safe side, I'd say one that can do at least 6V @ 3A. I use mine to rotate a telescope, it is maybe 2ft long with a plastic body and I've not noticed any problems yet.
Alexander Perez
Reviewed in the United States on July 22, 2018
Hell of a servo! I'm using it on a tilt-rotor VTOL plane (two front motors). The servo is solid and able to handle the torque you throw at. Nothing else needed to say. IT WORKS! A MUST HAVE!
mk
Reviewed in Japan on November 26, 2018
メタルサーボホーンや金属ブラケットの寸法が明記されているとGood
Kei
Reviewed in the United States on October 21, 2018
This is the first time I've purchased one of these "double sided" servos. I'd like to note that there isn't an axle, it's one driving and one free-sitting. No problems, works as expected, with quite a bit of torque.
Recommended Products