Your cart is empty.
Your cart is empty.Product Description
Carbon Film Resistors
- Carbon Film Resistors are manufactured by coating a homogeneous film of pure carbon on high grade ceramic rods. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with layers of tan color lacquer.
- Rresistors with ±5% tolerance range,1/4W carbon film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly.
1/4W Resistor 's Relative Parameters
- The total length: 60mm / 2.36inch.
- One side lead length: 27mm / 1.062inch
- The length of the shell: 6mm / 0.24inch.
- Diameter of shell: 2.3mm / 0.09inch.
Aaxial-Lead Resistors
- Excellent overall stability
- Accurate ratings: ±5% tolerence 1/4W.
Packed In a Box
- 25 Values 1/4W Resistor with practical packaging to store and use conveniently.
ALLECIN Resistors Assortment Kit
- 1/4 Watt 1Ω, 2.2Ω, 3.3Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 560Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ, 5.6KΩ, 10KΩ, 22KΩ, 47KΩ, 100KΩ,1MΩ carbon film resistor with ±5% tolerance range.
###Each models' quantity is 10pcs.
Tiffany
Reviewed in the United States on March 6, 2025
Works as expected
Cody
Reviewed in the United States on March 6, 2025
Great
Marty McFly
Reviewed in the United States on March 10, 2025
Ordered these to get just a single resistor to solder a fix on my Cisco ISR 4000 series router and it worked a treat! Now I have a few hundo extra resistors for other projects in the future! Definitely a great asssortment for any hobbyist who needs them!
Skip Hansen
Reviewed in the United States on February 17, 2025
Delivered quick, good value.
RumGrum2021
Reviewed in the United States on August 6, 2024
A little overkill buying this set. I only needed 1 but didnt know which 1 though. Turned out the 10K resistance is what i needed to bypass a sensor on my vehicle. The brake fluid level sensor. My ABS and Emergency brake light would come on and off constantly and couldnt pass state inspection. I read the codes, and showed brake fluid level low. Reservoir was full. I replaced the brake master cylinder with reservoir cause they dont sell the sensor separately and a reservoir alone was about 85-90% of the combination. After replacing the light would just stay on. But brake system worked fine. I read an article about this for the same year and model and the sensors are a hit or miss. But some said the did the same but they couldn't remember if they used a 1k, 9k, 10k, 11k, or 12k. So i got this and used the 1k. The light went off and i felt victorious. but after about 5min the light came on. But i knew i was on the right path so i just used the 10K and light went off again and stayed off this time. Now i have a bunch of these and not sure what to do with them. I'll prob keep and never use them again. But for the price of these vs a technician troubleshooting or replacing the master cylinder / reservoir again to rebleed the entire brake system?........These would do just fine thank you and yes, will monitor my brake fluid level too. 07 ram 1500 SLT 2wd 4.7
msz
Reviewed in Mexico on March 13, 2024
buen surtido de resistencias para reparaciones de equipos de alto consumo de voltaje.
Bud I
Reviewed in the United States on December 18, 2024
A lot of useful values, well organized, at a great price.
J. S.
Reviewed in the United States on October 6, 2024
These are exactly what I was expecting. No problem with the quality, and the case is decent. The color card is also a nice touch, but the resistance is also printed on the tape the resistors are attached to. The range of resistance is appropriate to my projects. Just what I needed.
cryptoman
Reviewed in the United States on November 1, 2023
The media could not be loaded.
Recommended Products