Your cart is empty.
Your cart is empty. Push in socket, easy to install, no need for a screwdriver for installation, as long as a slender tool is gently inserted into the upper hole to connect wires.
Package include :
2 x Power Relay ,2× Socket Base ,1 x Rail Slotted Aluminum , 2 x Screw
Relay Features
1.Slim size: width 5mm(0.2'')
2.Switching capacity: 6A
3.High breakdown voltage 4kV(between coil and contacts)
4.Surge voltage up to 6kV (between coil and contacts)
5.Meeting VDE0700/0631 reinforce insulation
6.High sensitive: Approx.170mW
7.Sockets available
8.Environmental friendly product (RoHS compliant)
9.Outline Dimensions: (28.0x5.0x1 5.0)mm
Relay Contact Data
1.Contact arrangement: 1H,1Z
2.Contact resistance: 100mQ(1A 6VDC)
3.Contact material: AgSnO2, AgNi
4.Contact rating (Res.load): 6A 250VAC/30VDC
5.Max. switching voltage: 400VAC/125VDC
6.Max. switching current: 6A
7.Max. switching power: 1 500VA/180W
8.Mechanical endurance: 1x 10次
9.Electrical endurance: H:6x 10° (AgNi, 6A 250VAC/30VDC85°C，1s9s )Z:3x10*(NO, AgNi, 6A 250VAC/30VDCElectrical endurance85°C，1s9s )1x10*(NO, AgNi, 6A 250VAC/30VDC .85°C，1s9s )
Relay Characteristics
1. Insulation resistance: 1000M 2( at 500VDC)
2. Dielectric Between coil & contacts: 4000VAC 1Min
Strength Between open contacts: 1000VAC 1 Min
3. Operate time(at nomi.volt.): ≤8ms max.
4. Release time(at nomi.volt.): ≤4ms max.
5. Shock Functional: 49m/s2
Resistance Destructive: 980m/s?
6. Vibration resistance: 10~ 55Hz 1mm
7. Humidity: 5%~85%RH
8. Ambient temperature: -40°C~+85C
9. Termination: PCB
10. Unit Weight: Approx. 5g
11. Construction: Plastic sealed, Flux proofed
Pcfixer
Reviewed in the United States on September 9, 2024
These did the job as I needed. But pay close attention to the voltages stated. Also be aware that these are solid state not mechanical, and they work differently from mechanical relays. One difference is you can't use them to self latch, I tried just to see if it would work and it doesn't. You'll need another relay if you're working with a latching circuit. Frankly it would probably just be easier to use a mechanical relay for that kind of circuit. That's not a mark against these, they do what they're supposed to, it's just a matter of how they operate.
Oldshoes
Reviewed in the United States on February 8, 2024
The media could not be loaded.
Matt
Reviewed in the United States on February 8, 2024
Picked these up for the parts drawer, never know when things are going to need some switches. Before they disappeared to the depths of billy bob's locker, I wired them up on the bench. They worked as described, so happy to have them for when they are needed.
Sparky770
Reviewed in the United States on February 17, 2024
Small relay with NO (normally Open) and NC (Normally Closed) contacts fed by a 24 volt coil. Has a pilot light (LED) to indicate when the coil is energized. Great for all automation uses.
Viking Lawyer
Reviewed in the United States on February 16, 2024
Nice to have, take up little space. I get things like this as spares because ya need them when you discover you need them, not later.
Customer
Reviewed in the United States on November 21, 2024
This works well on a large rock sawing system. However, as someone else commented, they are large.
stephen Lynch
Reviewed in the United States on January 27, 2024
These are wonderfully compact din mount relays that run on 24v dc, but can of course switch AC on the relay side.They're pretty quiet, and I like that you can fit a bunch of them in a couple of inches..They come with a little baby 4" piece of mounting rail as well, so you don't need to cut a big one up if you only need a couple of inches... Bonus!I'm using them in some Home Made slot machines I'm building....They will trigger the coin dump if someone hits the jackpot...Great little relays! Din Rail is where it's at! Not only does it make wire management a breeze, it makes everything look very professional when it's all buttoned down.
Jaime G.
Reviewed in the United States on October 12, 2023
Good
Recommended Products
$23.88
$ 9 .99 $9.99