Your cart is empty.
Your cart is empty.Product Description
FSJEE 5050 3Pin 10MM RGB LED Strip Light Connector Kit
------provides the most parts for your DIY lighting. For 10mm 3pin color changing 5050 WS 2811 / WS2812 /SK6812 LED strip lights.
Wire to Strip Connector is used for connecting LED strip to Extension wire without stripping and soldering,DIY LED strip to the length of wire what you need.
LED Strip Jumper is used for connecting 3pin RGB 5050 flexible LED light strips and strip segments around corner.
Gapless LED Strip Connector is used for connecting 2 WS2811 WS2812b flexible LED tape light or strip segments.
L Shape Connector is used when you need LED strips around sharp 90 degree corner.
T Shape Connector is for 3 way quick splitter connection.
Help you perfect your lighting project wherever you want to lay out the lights
1.Does these 3 pin connectors work with XXXBrand light strips?
It depends on the specification of XXX(Brand) product you've bought. These connectors fit for any Brand LED Strip light which is 3pin 10mm wide smd5050 and the pitch of pin on the PCB board is 2.5mm.
2. For extension cable, do I have to solder them? Or just expose wiring and commect them to the led strip using snap ons?
When you use the extension cable, you need to solder.Of course you can also clip the four wires into the connectors, but still recommend to solder them to the connectors pads, otherwise it will not be very strong.
3.Why does my light not light up after connecting with these connectors？
Please confirm the LED STRIP is working properly before connecting.
a. Working---- In this case, please check whether the connector is correctly connected to the two segments LED strips. Make sure that each PIN of the connector is contact tightly with the copper pads on the LED strip. Please adjust them slowly,then the other LED strip segment will light up.
b. Not working ---- This is the problem of the LED strip light, it does not work, so even if the connector is connected perporly, the LED strip light cannot light up.
4. I am not good at using these DIY connectors at all, but I really want to use them to complete my light plan, do you have a better way to help me?
Yes.24-hour online service and professional technicians will guide you step by step to use these accessories, easily complete your lighting plan.
Diego Gonzalez
Reviewed in the United States on March 15, 2025
Excelente artículo
Pstros
Reviewed in the United States on February 24, 2025
Super touchy connections. I split the tape into 8 runs for a cabinet; only the first two would light in "warm" mode. Others began to light in higher K ranges. After measuring, assembly, gluing, I'm now stuck with two colors or one bright color I don't like. Wouldn't recommend.
Dan S
Reviewed in the United States on December 11, 2024
It seems like it would work for some 10mm LED strips, however, the pins were wider than the LED strips copper connection on the 10mm LED strips I had, so I couldn't use them - be careful on banking on these being your solution. I would suggest ordering a few different varieties and try how each one works.
MrNomer
Reviewed in the United States on August 18, 2023
I needed to customize some led strips to fit under cabinets, and these worked exactly as I needed. I didn't find it fiddly or tricky at all. First attempts all succeeded.
Daniel Cárdenas
Reviewed in the United States on December 9, 2023
El producto es muy bueno, los conectores son de buena calidad, funcionan muy bien
Casper
Reviewed in the United States on November 22, 2022
My wife bought an LED light strip install kit for a good price some time ago. When I finally got around to installing it I realized that there wasn't any way to safely turn a corner without bending the strip and potentially breaking circuit. After looking around for a while I found a compatible corner kit that allows me to make 90 degree turns cleanly and safely. Be sure you're cutting your strip at the appropriate point otherwise you'll damage the circuit. You can also use the plastic connectors as simple unions if you want to, just take out the corner strips and you're good to go. There's no adhesive on these units but that's ok because my kit has plenty of it on the strips themselves. I found this kit to be a great value just be sure that strips you're going to use with it are compatible. There are a few different versions out there and these corner kits are specific to one style.
Customer
Reviewed in the United States on March 11, 2020
Know before buying that these things DO work but are extremely difficult to work with. Firstly, you'll need magnification to see well. I used a knife to "prime" the prongs so I could get the light strip into the connector. Best advice also is to use pliers and such don't try to manipulate with your fingers, you'll just hurt yourself! Suggest practicing one or two on a scrap first.
Shayne R.
Reviewed in the United States on October 1, 2019
They worked ok, but for some reason, you have to wiggle the cable just right to get the connectors to all align up and work properly. Also on the "T" connector, it actually flip flops the currents, so if you are using 5050 led lights, you need to pay attention to which side you cut to reconnect, otherwise you will have to turn one upside down and that does not work correctly.
Recommended Products
$11.27
$ 5 .99 $5.99