Your cart is empty.
Your cart is empty.3M PPS 2.0 type H/O paint pressure cup, collar and air hose is designed to spray thick high-viscosity liquid material with the 3M Accuspray HGP Spray Gun and PPS 2.0 lids and liners. With the pressure cup, air is forced through the air hose to collapse the liner and push out the paint material. Ideal for applying undercoating, truck bed liners, sprayable adhesives, sound dampening coatings, high-build primers and gelcoats. The pressure cup system produces a smooth, consistent spray pattern that lets you quickly build mil thicknesses and limits overspray for less product waste and less cleanup. Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less material. Simply place a liner in the reusable paint cup, mix the material, snap on the lid and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems.
J. Frog
Reviewed in the United States on February 8, 2025
Expensive for what it is, but the time savings with this system is worth it.
Kds2021
Reviewed in Canada on July 16, 2024
This product worked great...... for a short period of time. Then it stated to leak air from the locking collar, and so the pressure cup would no longer hold the proper pressure. The lid would no longer seal. I can understand that products can break down and begin to show defects.I had this only about six weeks or so. Not long after the 30 day return window closed.So after contacting 3M to discuss a warranty replacement, I was told there was no warranty!At all!!They don't warranty their products?!Reprehensible.
david giovanelli
Reviewed in the United States on March 21, 2024
Well though out Excellent quality cup thick plastic works great pressurized and easy to clean
J. Michas
Reviewed in the United States on September 6, 2023
I used the metal cup that came with my HVLP sprayer exactly once.Then I bought this and the liners for it.This makes spraying with my Fuji T70 so much nicer.Aside from the obvious ease of cleanup since you can just dump leftover paint and liner in the trash, the biggest perk is with spraying. With the stock T70 you have the bottom mount cup and so you are limited in movement. The PPS system allows you to invert the gun, so when you are painting something like a door and it is not elevated off the ground very much you can use the gun upside down to paint the bottom, this is a huge bonus.
tomdckd
Reviewed in the United States on September 20, 2023
Changed all my guns over to this system. I have left product in the gun for weeks and am able to just turn on the turbine and start spraying. Some products you can't do that though like Zinser oil primer, and helmsman varnish. but my lacquers and latex paints have been fine.
Eric
Reviewed in Canada on June 8, 2023
If you’re using the 3m PPS system to spray thick materiel, this pressure cup is a saviour. Done are the days of trying to paint with one hand and using the other to squeeze the cup liner at the same time.
CodeMonkey
Reviewed in the United States on May 21, 2023
This is great system if you’re spraying in high volume. I can fill two cups and just swap them out when empty and keep going.
14themoney
Reviewed in the United States on March 25, 2023
I bought this for my fuji HVLP T75G spray gun and it worked great but that much fluid on the top of the gun can become extremely fatiguing if you're doing a lot of spraying. Probably 1 reason the factory cup is a much smaller capacity. So I changed guns from the gravity feed to a bottom mount cup, (T70).Works just as good but the balance to me is far better plus you can use your support hand if needed when spraying a larger volume of paint.But really love it because the clean up and potential storing of unused paint is outstanding. But it comes at a cost. The system is a bit pricey but for me, I hate the clean up process so it's worth the cost to cut my clean up hassle, time and mess to minutes.
Paul
Reviewed in Canada on February 20, 2022
Works great with the gravity gun providing pressurization with pps 2.0 disposable insert liners
Wood Slicer
Reviewed in the United States on October 20, 2021
This is my setup and how I use my 3M PPS 2.0 H/O Pressure Cup. With the gravity feed, one could argue that the pressure cup is not needed, but it sure makes the whole system work well. I spray from all sorts of angles. The cleanup is where this system shines in my opinion. Cleaning up after painting is no fun, but this system makes the process tolerable.Fuji Spray 5175G - T75G Gravity Spray Gun - Hvlp Sprayershttps://amazon.com/dp/B00D4NPQSQFuji 2904-T70 Mini-Mite 4 PLATINUM - T70 HVLP Spray System - Hvlp Sprayershttps://amazon.com/dp/B00D4NPMJOAmazon.com: 3M 26003 PPS 2.0 Spray Gun Adapter 16 mm Female, 1.5 mm Threadhttps://amazon.com/dp/B07PD7BS9Z3M PPS 2.0 26173, Standard, 22 Ounces, 200-Micron Filterhttps://amazon.com/dp/B001UNXE68
Marius Morosanu
Reviewed in the United States on April 6, 2021
So I did some research on what to purchase for my FUJI sprayer and found what I believe is the best option (price aside). First the review.. It's an AWESOME SYSTEM and you will love it for it's ease of use, cleanliness, and the ability to spray nearly upside down which I thought was great!1. You will need THIS pressurized cup PLUS two other pieces..2.Tthe female adapter for THIS cup to your FUJI model.. Here is a link to the one I purchased for my FUJI T-Model spray gun.. https://www.amazon.com/gp/product/B07PD7BS9Z/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=13. You will want to purchase the REFIL KIT WITH LINERS.. here is a direct link https://www.amazon.com/gp/product/B001UNXE68/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1. You can also search for "3M PPS 2.0 Paint Spray Gun System Refill Kit with Lids and Liners, 26173, Standard, 22 Ounces, 200-Micron Filter, Use for Cars, Furniture, Home and more,12 Disposable Lids and Liners,16 Sealing Plugs" here on Amazon.That's ALL you need. Be aware the the black ring around the replacement lids are not necessary when you use it with THIS pressurized cup system. The lid lings are ONLY for the non-pressurized 3M paint system. The pressurized cup has it's own plastic ring which is reusable with the filter lids.That will get you going with plenty of refills and new fun toys to play with on your next spray job.
Recommended Products
