Your cart is empty.
Your cart is empty.3M VHB Mounting Tape Strip duly serves the purpose of maintaining a strong between varieties of materials with different surface energies. The strip of tape spreads the load stress across the joint length to accommodate the contraction and expansion rate. This acrylic tape strip can be used in place of messy and unsafe drilling, grinding, screwing, welding, and refinishing applications. This double-sided 3M tape helps keeping the bonded surface smooth by covering welds, rivet heads, and cracks. This VHB tape can be used effectively on different types of materials, such as glass, metal, steel, aluminum, acrylic, polycarbonate, and plastic.
jimco
Reviewed in the United States on March 11, 2025
all went well
MARIE VALINOTI
Reviewed in the United States on June 22, 2024
This tape is always been perfect for me.. it ALWAYS works !! it's always held up ! it's always very nice and sticky and ready to put my parts together and this has been the best 3M tape that I found so far anywhere including EBAY!
Gelo
Reviewed in the United States on May 6, 2024
I use this for a product application in my business, been buying these for years and it’s perfect, genuine quality every time
Jean C. Hofve
Reviewed in the United States on May 21, 2024
Works great, seems like it takes its job very seriously. I wouldn't want to meet it in a dark alley.
M. C. Payette
Reviewed in the United States on February 23, 2023
I used strips of this to adhere 3/16" cork tiles to glass to cover up a heat mat on the exterior side of a vivarium, and to insulate the glass. Despite the cork tiles shedding nonstop powdery cork dust/debris, the strips of tape stuck magnificently along the lengths of the cork tiles and onto the glass and plastic of the heat mat. I doubled up the cork tiles layer for extra insulation and this even stuck one cork tile back to back with another. It's still holding strong and is barely visible. Wish I'd used this to secure the heat mat to the glass, too, because the clear tape I used shows very easily through the glass, whereas this tape barely shows at all (see photo).My only negative remark is that trying to start a corner or edge to peel off the red backing strip is very difficult! I found it easiest to work at peeling a corner/edge while the tape is still on the roll, then folding a tiny flap of the red backing up as a tab. Then I peeled the tape up off the roll and measured, cut and adhered it. It worked much quicker that way.
JBKNY
Reviewed in the United States on October 15, 2023
It sucked. Seriously 3M should be ashamed. I purchased this to hold the plastic in my vehicle that it’s supposed to hold and it didn’t. Peeling the red backing off of the double sided tape was a hassle. Once you peeled it off if you were lucky enough to not get the tape taped to itself trying to get it to stick to what you needed it to stick was worse. Idk if this can even hold a balloon to a wall.
JAVIER
Reviewed in Mexico on July 8, 2022
La cinta llego en una bolsa transparente, no trae el logotipo 3M en el carrete el adhesivo es pobre y es completamente diferente en todo, a la original que se me termino.
Sam H.
Reviewed in Canada on July 5, 2020
Bought it to re-attach my dash cam to a new vehicle. It took a very long time and tools to take off the original 3M tape that the dash cam came with.This tape didnt hold the cam to my new car. The cam fell off and I was able to easily peel the tape off from my windshield. I applied the tape the same way as the original tape, used alcohol to clean my windshield and pushed firmly for over 2 minutes.
WISEGUY
Reviewed in Canada on June 4, 2020
Excellent tape. Shipping has something to be desired. This is a prime shipping qualifier arrived two weeks to the day after order was placed.
CaP.
Reviewed in Canada on November 15, 2018
Works for my dash cam - just had to put many strips side by side.Clean the windshield with alcohol.I missed the 1/4 inch part :-/
Josh (Xaminmo) Davis
Reviewed in the United States on October 25, 2018
This is more like a gummy gel. Think of the type of glue used inside of magazines to stick cards inside, that stretches.If you get any dust or dirt on this, it will reduce the adhesion, so make sure your surfaces are clean, dry, and free of debris.When you cut this, you'll find it hard to peel the backing off. Instead, pull the corner, and it will stretch. That will cause the backing to come lose, and you can peel the rest off.This needs to go on flat. If the corners will curl up due to odd shapes, trim the corners.Press the tape onto or into the surface. If the surface is not flat, either cut out the non-contact parts, or fill in the gaps for best effect. For instance, a plastic bracket for mounting a temperature sensor needed 4 layers, and then a 5th layer over the whole plate. Not ideal, but it was fine.For flat surfaces, make sure the edge of the tape is protected. If you pull the tape, it will stretch, and come lose, similart to Command hooks.Best adhesion happens over time. If you stick for 1 second and let go, then it will not adhere well. Push the parts together well, and give it a couple of seconds. If it's cold, that will affect adhesion too. The tape is soft, and needs to stick into any fine texture in the surface.Once it is stuck, it should stay. I could reposition it a few seconds later, but a few minutes later, it was much harder to unstick.Keep the unused portion in the bag to protect it from dust and contamination.
Customer
Reviewed in Canada on September 1, 2017
:)
Renbutsu
Reviewed in the United States on January 2, 2015
Tape works great, VHB as expected. Pack was cut into the size that I ordered. Be careful with these as the bond is very strong and one must be aware of it. One can find it very hard to remove and also potentially damaging to the surface you are trying to rip these off of. As long as one is aware of that, these will hold and hold practically in all conditions, indoor and outdoor. I like these also because they are in pieces and are clear. On a glass surface you want clear so you don't see the adhesive as much compared to a grey or black one. Plus because of the high bonding strength, you really don't need a lot of these, it would be a waste, just a little is enough. In some cases where one might think a whole strip across would be needed, in fact at corners and maybe in the center is all one needs.I only wish that the cost was lower.
Recommended Products
