Your cart is empty.
Your cart is empty.Product Description
What is safety film for a window?
Security window films are a cost-effective solution used to strengthen and enhance the safety of regular glass. This helps protect windows against smash and grab attacks, break-ins, vandalism, natural disasters, and even high-powered impacts like bombings.
-
Hurricane or tornado
Reduce the risk of injury from flying glass
When disaster strikes, can windows take a beating without shattering into dangerous shards of glass?
-
Gaining time to seek help
Protect your home from intruders
Our security window film discourages break-ins and makes forced entry difficult.
-
Playing near the windows
Keep kids and pets safe
Our safety film can minimize injury by holding the broken glass shards together.
-
Easy to remove or replace
Protect your surfaces against most scratches
If your films are tagged or scratched, you can easily remove them with a high concentration of soap.
-
-
Prevent shower glass breakage
Accidents could happen inside the bathroom, sometimes leading to glass breaking. This film can make sure that the shower glass remains intact and does not hurt the occupants when they have a fall.
-
Improves School Safety
What would normally take seconds to break through a glass window now takes minutes. This is more than enough time for school administration to call authorities and lockdown the school.
Hunter Black
Reviewed in the United States on January 19, 2025
Like others, I had issues with the ends of the product curling up and not adhering to the glass. I ended up taking the product off and throwing it away - which is frustrating.
GC
Reviewed in the United States on September 5, 2024
Perfect as a security film. It's a 7 mil film very thick. But I don't recommend you buying it and installing it unless you have done tinted film installations before because due to its thickness, it is a little bit difficult to manage but with patience and experience, it comes out really nice. Air bubbles have to be squeeged out very carefully. So none is left after the film dries. Very satisfied with the product and my installation
MarieD
Reviewed in Canada on September 16, 2024
C'est après avoir appliqué le film sur la 3ème fenêtre que j'ai compris comment l'appliquer. J'avais acheté la bonne largeur et n'avais qu'à figurer la longueur requise pour chaque fenêtre. J'ai déposé chaque fenêtre sur la table de cuisine, car je trouve plus facile de travailler sur une surface plane et stable. J'avais aussi acheté le kit suggéré pour l'installer.J’ai nettoyé un côté de la fenêtre et y ai déposé le film. Je me suis servie de mon propre exacto et de la spatule jaune pour tailler le film le long de l’intérieur du cadre de la fenêtre. Une fois le film taillé, j’ai ensuite fait un petit paquet avec du gros tape que j’ai appliqué sur les deux côtés d’un coin du film pour enlever la doublure qui protégeait le film. J’ai placé des objets lourds sur la moitié de la surface du film / de la fenêtre et j’ai enlevé une moitié de la doublure à la fois, car sinon ce serait trop difficile d’appliquer le film sur la fenêtre par la suite, étant donné que j’ai fait cette tâche toute seule. J’ai ensuite appliqué la solution liquide préparée et l’ai vaposirée sur le côté n’ayant plus de doublure. Je me suis ensuite servie de la spatule jaune pour envoyer l’eau sur les côtés de la fenêtre, que j’enlevais avec un linge propre au fur et à mesure. Lorsque l’eau ne sortait pas, je me servais d’un ciseau pour trimmer les rebords du film afin de permettre à l’eau de sortir et d’enlever des bulles.J’ai recouvert 12 fenêtres au total et j’en ai encore 12 à faire et je crois qu’il aura suffisamment de film pour toutes les recouvrir. Je suis maintenant à l’aise avec cette tâche et suis assez satisfaite du résultat. Il faut revoir le film au fur et à mesure de l’application, afin de corriger certains petits défauts , mais il reste toujours quelques petites bulles qui j’espère, partiront avec le temps. Mes fenêtres sont maintenant protégées et c’est ça l’essentiel. Si quelqu’un tentait d’entrer en brisant la fenêtre, il aura une surprise et si je suis sur place, j’aurai le temps de l’accueillir comme il se doit !!J’ai donné 4 étoiles sur 5 car il reste de petites bulles impossible à enlever, même après plusieurs efforts.Je recommande ce produit à tous ceux qui veulent protéger leurs fenêtres.
Marlon
Reviewed in the United States on August 31, 2024
I’m an over the road driver and one of the many hazards we face are things that fly through our windows and windshields while we are going down the road. In my case I have a tractor that was equipped with inadequate tandem mud flaps. These mud flaps allows rocks that are thrown from the tires to reach the back of the tractor cab windows causing them to shatter on impact and blow out the window. After applying this product a few months ago. it finally happened a rock was thrown out from my tractor tires and hit the back window but this time the the window shattered in place and didn’t come out I was able to continue on my route of 512 miles with out having to fix nothing, this product kept everything in place. and saved me time and money. Before i would have had to go into breakdown mode and loose a lot of money just for a simple back window blowout. the Photos proves it
Very poor quality material
Reviewed in Canada on August 31, 2024
Does not work
bruce stoner
Reviewed in the United States on December 20, 2024
Product at end of row curls off the glass, making it a pain at the end. Other wise great. 9mils thick film on the windows does lose a slight amount of clarity.
Paul Ede
Reviewed in the United Kingdom on October 28, 2024
It was easy to cut to size and it came with all the tools for fitting.
sarai
Reviewed in Mexico on September 21, 2023
Me gustólo fácil de colocar y la explicación definida
Curious George
Reviewed in the United States on August 31, 2023
Easy to install if you've installed window film before. You'll need a spray bottle of dish soap and water. A razor knife and plastic flat tool are included in the box. I would also recommend a small rubber squeegee to assist with mounting the product. I used this as a safety film on a couple close to the floor windows so as to resist shattering in case of impact. adherence seems very good compared to other window films I've used. Peeling the backing off is the most challenging part of the process. I recommend an extra set of hands to assist. It helps to be able to spray the soapy water on the film while peeling the backing off. I also recommend using a 4" razor scraper along with the soapy water to insure that all debris is removed from the glass making it SUPER clean before applying the film for best results. Spray window, scrape with razor, squeegee excess fluid, cleaning both tools as you go with each pass.
jennifer
Reviewed in the United States on October 23, 2023
So this is one of those things that you hopefully won’t have to see in action. Wanted some protection/deterrent for a fire escape window in an apt.First- I would never recommend on a very visible window because it doesn’t come out terribly smooth looking. Prep/measure/cutting- easy. It does come w an exacto knife which was nice but I used sharp scissors and it cut way easier than the knife. I used the box it came in as a straight edge and marked off where to cut.Application- so I got to practice this five times because I applied film to 2 window panes inside and out and one mess up practice. The box (instructions are on the box printed) says the more water the more stick- this was not the case and I had to toss that one as it wasn’t sticking. I found it worked best to do an edge and work the film on the window and get out the air bubbles.Recommend another person to either hold the film or smooth it. Ironically the smoothest one was the first one w all the water but again useless bc it didn’t stick in the corners.Look- it’s kinda a hot mess. I’m not sure of a process you could get it totally smooth without some air bubbles or sticker marks on the window. Overall I’m hopeful they will stay on- time with tell with all the elements against the film. I’m glad I have a curtain that’s over this window so I don’t have to see it but also feel like I did something to help with security or peace of mind.
matt151617
Reviewed in the United States on April 23, 2023
I wanted to make my basement windows more secure- they're small sliding windows. I figured a combination of sliding locks and this coating would be enough to motivate someone away from crawling through a broken window. Size- I had 6 windows (3 2-part windows) that measured 12x14.5" each. I had just enough to do all windows fully.I followed the directions fully- cleaned, scraped with a razor, cleaned again, sprayed soapy water on the window and the coating, and then applied. Everything would squeegee out nicely, but as they dried small bubbles would form, especially on the edges. I would keep removing them and they'd keep reappearing. One window was covered in small dimples, the other had a lot of bubbles around the edges, and the 3rd looked ok except for a few spots.There's no possible way you could do a larger window or door and have it come out perfect. Even a tiny spec of dust is going to leave a bubble. This reminds me of the plastic screen protectors for cell phones that just never went on without some bubbles.In the end, the coating did the job and I don't really care about the bubbles since it's a basement. But just be aware you might want to have it done professionally if it's a window you look out of every day.
Diesel
Reviewed in the United States on April 2, 2023
Like: wmeasy to install.Dislike: imperfections throughout product. Second photo was not good, but shows the blurry spots that were uniform the whole way through the roll.. Every 4 inches.The product does not adhere to glass. Adhesive is junk.Waste of money. Please refund..
Recommended Products