Your cart is empty.
Your cart is empty.Product Description
Slim Magnetic Scale DMS MODEL --1UM RESOLUTION
Flat scale -bar-easily mounts directly to machine
A slim design means the readhead can be mounted close to the machine, increasing travel and tool efficiency.
- Slimmer profile readheads are also much less likely to get damaged from dropped tools or workpieces.
- Magnetic readheads retain the advantage of being impervious
Width =20mm .Thickness=10mm
--Advantage of Magnetic Scale
- Magnetic scales combine the best of optical and inductive technology.
- Magnetic scales are impervious to coolant, liquid or dust, yet are slimmer than either of the other two technologies.
- Magnetic Scale easier to mount, more durable, and can be broken down into convenient lengths for shipping.
Baykunl D80M Digital Readout -3 Axis DRO
Die casting alloy casing,very robust, Industrial quality.
Adopting innovative cover technic on windows,super clear reading.
Special Function List
- PLD Function,PCD Function ,
- Simple R function Smooth R Function,
- Radius/Diameter switching,Axis summing,
- Digital Filtering Function,Taper Measuring
- Bevel Function ,Rectangle Chambering
- Rotational Speed Measurement ,
- Linear Measuring Basing Rotary Encoder,
- 16 sets of Tool Memory,
- Dynamic Graphics
- Preview Drawing
3 Axis Digital Readout DRO forMill Machine -3 Axis DRO
-RPM function & Hall Sensor ,
- Voltage Range:AC80V-260V/50HZ-60HZ
- Power Dissipation:15W
- Working Temperature:-10℃~60℃
- Operating Keypad:Mechanical Keypad
- Input Signal:5V TTL/RS422
- Input Frequency:≤4MHZ
- Resolution:0.1μm 0.2μm 0.5μm 1μm 2μm 2.5μm 5μm 10μm 50μm
Function List
- Zeroing,Data Recovery,
- Value Inputting,
- Metric and Imperial Switching
- Power off memory,Encoder
- Selection(Rotary or Linear),
- Linear Compensation,Non-linear Compensation,
- Calculator
- Counting Direction
- Setting,ABS/INC Coordinate
DRO Advantage
Grid Hole function
- Special previewing the drawing function,after setting well the parameters,the DRO will display the machined well effect which makes the operating be more visual.
Rectangle Chambering
- Displaying the tool’s current position function,during the machining,the system will display the tool’s current position according to the drawing which makes the machining be much more easier.
Bolt Hole function
- Saving the drawing function,the DRO allows to save the drawings into the system which makes the machining to be much more convenient.
Axis combination
- 7 true color LCD screen,alloy die-casting case.Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.Easy to recoginze and very robust.Super fast calculation speed. Built-in manual,free the hands from the paper manual.
Mike the Mechanic
Reviewed in the United States on March 29, 2024
After much research I decided to go with this DRO with magnetic scales rather than optical scales. (Needed to custom fit scales to mill, and sizing the scales with this kit was simple and straightforward) As expected the time to fabricate brackets to hold the scales so they could be adjusted was considerable. I was able to use some of the provided angle brackets and had to fabricate others due to casting angles and such. Once everything was installed and the read heads were positioned as described in the instructions I was pleasantly surprised that the DRO head unit reported movement on all three axis once it completed its power on cycle. Setup of the +/- movement for each scale was easy as was the unit of resolution. (1us in my case) Once everything was calibrated a test against a .0005 scale dial indicator was encouraging. When I couldn’t get consistent results I became somewhat concerned but after a bit of research online I was able to setup a measurement test with 1-2-3 blocks that gave good results.In actual use to machine a small steam engine from castings and stock I was happy to find the DRO provided excellent results in setting reference points and then measuring work movements with expected accuracy. I have not used most of the special software functions save for locating points on a circle function which worked very well. (Much quicker than mounting, indexing and using a rotary table) I have not had any operational issues with the unit in six months of use and might just buy another one for my lathe.
Lee
Reviewed in the United States on June 20, 2023
Easy install, great features, great price. Can not speak of how long it will last, but so far it has been a great DRO. Time will tell if it holds up as good as the ones twice it’s price.
Recommended Products
$119.00
$ 51 .99 $51.99