Your cart is empty.
Your cart is empty.Product Description
Uanofcn Water Pump Service Kit
Rebuild Kit Contains:
Water Pump Service Kit replaces MerCruiser part # 47-43026Q06
- 1 X Neoprene Impeller 19210-ZW1-303
- 1 X Wear Plate 19231-ZW1-003
- 1 X Water Pump Gasket 27-817277
- 1 X Water Pump Gasket 27-43033
- 1 X Impeller Key 28-43037, 2 X Drain Screw Gasket 26-830749
- 1 X Face Seal and Tool 26-816575A2
- 1 X Seal Ring Gasket 26-45577
- 2 X O-Ring 25-21836
Water Pump Impeller Kit for Mercury Mariner Force 2/4 Stroke 40 to 350 HP
Fit Motors:
- 150 hp LZ150 2001 & Up, 150 hp PX150 1999
- 150 hp SX150 1999 - 2005, 150 hp VX150 2000 - 2005
- 150 hp VZ150 2000 & Up, 150 hp Z150 2001 & Up
- 175 hp All 1992 - 2000, 175 hp VZ175 2001 & Up
- 200 hp All 1992 - 1999, 200 hp F200/LF200 2002 & Up
- 200 hp L200 1992 - 1999, 200 hp LX200 1999 - 2005
- 200 hp LZ200 2000 & Up, 200 hp SX200 1999 - 2005
- 200 hp VX200 2000 - 2005, 200 hp VZ200 2001 & Up
- 200 hp Z200 2000 & Up
- 225 hp F225/F225 2002 & Up
- 225 hp VX225 2000 - 2005
- 250 hp LZ250 2003 & Up
- 250 hp VX250 2002 - 2005
- 250 hp Z250 2003 & Up
- 300 hp LZ300 2003 & Up
- 300 hp Z300 2003 & Up
- 300 hp Z300/ (6D0 ) 2003 & Up
Step 1
- Install Gasket
- Install The Steel Plate
- Alignment with dowel pins
Step 2
- Install the Impeller key
- Install the Impeller
Step 3
- Install Water Pump Housing
- Install Bolts
Step 4
- Install Sealing Ring
Bolts can be fixed with external tools
In the end you will have a very successful installation of the pump repair kit
Debbie Walker
Reviewed in the United States on September 3, 2024
Worked on my boat great
Andy
Reviewed in the United States on July 17, 2024
Great product easy to install and worked great.
Jessy R.
Reviewed in the United States on June 4, 2024
Perfect
Customer
Reviewed in the United States on December 12, 2024
The water pump kit fits perfectly well on my 1997 Alpha 1 Gen+ Stern drive. Quality looks good and at reasonable price. I run the motorboat for 20 minutes and the water recirculation was constant
Jerry D.
Reviewed in the United States on October 15, 2024
Had everything needed for replacement of lower unit impeller. Should be replaced every 3 to 5 years.
Jacqueline
Reviewed in the United States on April 25, 2024
Worked exactly as described!
Gregorio Rodriguez
Reviewed in Mexico on August 27, 2023
Funciona muy bien
Customer
Reviewed in the United States on April 28, 2022
This kit was for a 1999 Mercury Force 75 hp outboard motor. I purchased used and had not been run for a year. Impeller was hard and not flexible enough to pump water. The kit fixed that problem and the job took about 2 hours to complete. (I took my time). If you don't have a shop manual look for YouTube videos. I watched several and found one that matched the motor I was working on. Made things much simpler.
Wayne Uncer
Reviewed in Canada on September 5, 2021
Missing one of the impeller gaskets.
Dale Seto
Reviewed in Canada on September 13, 2021
Good quality kit, but you need two gaskets. One on top of the wear plate and one on the bottom of the wear plate. The bottom gasket is not in the kit. I was forced to use the original wear plate because the bottom gasket was stuck to the plate, and I did not want to damage the gasket. I was lucky that the original wear plate was still in good condition.
Mike M.
Reviewed in the United States on July 10, 2021
Missing one bottom gasket. Maybe factor made changes from old style
Customer
Reviewed in Canada on October 21, 2021
Original mercruiser part lasted several years this one failed and caused several exhaust parts to fail
Recommended Products
$214.43
$ 93 .99 $93.99
$109.99
$ 48 .99 $48.99