Your cart is empty.
Your cart is empty. Features:
1. STRONG HEAT RESISTANCE: Made of high strength, high heat material, can reduce arc heat loss and provide the best welding performance
2. LIGHTWEIGHT AND COMFORTABLE: Light weight, improve the flexibility of the torch and improve the comfort of the welding process
3. EFFECTIVE : The nozzle is used to the thread and opening of the welding nozzle holder during welding
4. WELDING: Flux core gasless nozzle insulates the operator from the circuit, making the welding process safer
5. 4PCS IN TOTAL: The package contain a total of 4pcs flux core gasless nozzle, enough for you to replace and use, very convenient
Specification:
Item Type: Flux Core Gasless Nozzle
Nozzle Type: Gasless self protecting nozzle
Product Material: Phenolic plastic
Suitable For: MIG welding torch 100L
More Applicable :
For Century FC90 Flux Cored Wire Feed Welder K3493 1
For Century 80 GL MiG,Flux Cored Wire Feed Welder
For Clarke Mig Welder 125EN 130EN 160EN 180EN
For Campbell Hausfeld WG2060 90 Amp MIG, Flux
For CAMPBELL HAUSFELD WF2150 WF2000 Wire Feed Welder
For Handy Mig FLUX NOZZLE KH726
For Electric K2481 1 Pro Mig 180 Mig Flux Cored
For Weld Pak 100 140 HD Mig Welder
For Sp 170T 220 Volt Mig Welder
For Sp 100 sp 100t sp 125 plus sp 130t sp 135
For Magnum 100 and Tweco #1
For Weldpak Weld Pak 3200 HD 3200HD
For Magnum 100L Tweco Mini, #1
For Weld Pak 3200 HD
For Magnum 100L K530 4 K530 5
For Work Pak 125 Work Pak Mig Welder
For PRO 100 Mig Welder
For Firepower 1444 0741 FP 120 130 135 160 Welding Systems
For h arbor freight CHICAGO ELECTRIC Flux 125 Welder
For h arbor freight 90 amp 110 Flux gasless welder 61849
For h arbor Freight Chicago Electric 170 68885
For h arbor freight 125 170 welder
For h arbor freight 125 170 welder
Package List:
4 x Flux Core Gasless
Hector l ortiz
Reviewed in the United States on February 18, 2025
Fits my Lincoln welder perfectly
Leonard L. Roberts
Reviewed in the United States on February 10, 2025
Just what the doctor ordered for my welder when running flux core wire, which is what I typically use when welding out or in the field.
Customer
Reviewed in the United Kingdom on September 18, 2024
Purchased some of these for my gasless mig welder, no gas you don't need a shroud so they seem like a good idea. After using a pack of six i started using my Old gas shroud again. I prefer my gas shroud.
Roger DeLano
Reviewed in the United States on August 3, 2024
These fit my amico mts 165 welder. They look like good quality and screwed right on to my mig gun. Will buy again if needed
crazylare
Reviewed in the United States on March 24, 2024
These fit right on the mig gun perfect and will make welding with flux core wire so much easier because you can see the end of the tip and thus it makes seeing what you're welding so much easier! I got these and tried one of them on my mig gun and it fits a normal mig gun end with threads.Spin the nozzle off and spin one of these right on and go to welding!
John Thake
Reviewed in the United Kingdom on March 23, 2024
I ordered the flux core nozzles as it said it fits my Clarks welder but when got them the thread in the nozzles was way to big so I am having to send the back so make 100% sure that that fit the welder that you have
Fenix
Reviewed in the United States on December 6, 2024
These Flux Core Gasless Nozzle Shrouds work as advertised, but I’m giving them 4 stars instead of 5 because they’re a bit short. It’s like expecting jeans that reach your shoes but ending up with ones that stop just above your ankles. They get the job done, but the length leaves something to be desired.
Kevin P.
Reviewed in the United States on December 27, 2024
yet, but they fit perfectly. I have an older "Hobart Handler 135" for reference.
Grant & Van
Reviewed in the United Kingdom on November 16, 2024
I'm learning to weld with flux core and these nozzles have allowed me to see what I'm doing way better than the nozzle for gas. Fitted my clarke welder perfectly.
Ghostknight
Reviewed in the United States on October 13, 2024
They cover the welding tip pretty well. But I do get a distinct plastic melting smell if I run it too long. Also bought some cooling gel for it and that does seem to help a little bit.
Mark
Reviewed in the United States on April 20, 2024
Tips fit my gun but one of them was broken in the package , Not worth returning , three tips should last awhile
A. D. Green
Reviewed in the United Kingdom on April 10, 2024
I'm new to mig welding, and I need all the help I can get, so when I found out about these nozzles I thought I'd give them a try.They make a world of difference to my welds as its so much easier to see what I'm doing. I only do gassless mig welding so the huge cone nozzle is nothing but a hinderance; Welding into corners is so easy now.
Recommended Products
