Shopping Cart

Your cart is empty.

Your cart is empty.

5” Dual Action Orbital Polisher Kit with 12mm Long Orbital Throw

Free shipping on orders over $29.99

$86.99

$ 36 .99 $36.99

In Stock

About this item

  • Looks small: Lightweight and compact design, Thumb switch button, handle it easily.
  • Works big: 12mm long throw, precision CNC orbital unit, 7A input powerful motor, power constant circuit board, let your works simply.
  • Dual action polisher is safe for paint, and design for polish, remove swirls and paint defects, even the users without professional experience can handle it early.
  • Perfect your paint with our one-step polish system. 5” backing pad with bevel edge foam pads, plus 12mm long throw, provide better paint correction capability, and let it is suitable for whole vehicle polishing.
  • This polisher detailing kit included 3 towels, 1 washing mitt, 2 polishing compounds, they are every you need to perfect your polish.



Product Description

AP315006 5“ DA Polisher 12MM

12MM Long Throw 5" Dual Action Polisher with Pads and Polishing Compounds

Looks small: Lightweight and compact design, Thumb switch button, handle it easily.

Works big: 12mm long throw, precision CNC orbital unit, 7A input powerful motor, power constant circuit board, let your works simply.

Slim Body

Slim Body and Light Weight

Slim Body Design, but Powerful motor, make your works fast and easily

Handle it easily

Handle it easily

This Dual action polisher with 12MM throw and good balance, running smooth, is safe for paint, and design for polish, remove swirls and paint defects, even the users without professional experience can handle it easily.

Operate it easily

Operate it easily

Operate it easily, Front cover, Body and Side Handle for hand-held.

Variable Speed

Variable Speed

Variable Speed from 200-5000/min

Lower speed for Cut and Polishing

High speed for Finish

High Quality 5" Pads

Backing Pad and Foam Pads

Hook & Loop connection for Back pad and Foam Pads

Multi-holes in Back Pad for ventilation

Foam Pad, 20mm thickness with forced layer special design for DA Polisher

Blue-Soft, for Finish

Yellow-Medium, for Polishing

Orange-Hard, for Cut

Compounds

H5 and X2 Polishing Compounds

H5 Fine Polishing Compound:

Remove swirl marks and micro grade sanding scratches

Ideal for spot repair on OEM clear coats

X2 One-step Polishing Compound:

One-step system provides a fast cutting and high gloss finish

Reduce clean up time and improved versatility, quality and speed to final finish

Rapid cutting and permanent finish, remove P1500 abrasive paper marks quickly


enrique a.
Reviewed in Mexico on July 25, 2024
Casi un año con la pulidora y sigue funcionan bien, solo los pads que vienen no son de gran corte, pero se soluciona comprando otros de lana
tina m mosley
Reviewed in the United States on July 21, 2023
My husband lives it uses it every weekend
C. B
Reviewed in the United States on July 19, 2023
Stop working after i use it for 3 cars. Buy something better, don't waist your money here.
Customer
Reviewed in the United States on July 16, 2022
Great little polisher that works great and fits into tight places others don’t
Katherine
Reviewed in the United States on June 28, 2022
I am going to start my review with my one complaint. The instructions are utterly useless. There is a manual in the box, but from start to finish, it is 100 percent safety warnings, most of which are general to all power tools. Not one single paragraph telling you how to operate an orbital polisher.Fortunately YouTube has lots of videos showing what to do.Since neither of us has ever done this before, we decided to test it on my husband’s pickup. This truck is 22 years old, has a 12 year old aftermarket paint job, and has been parked outside for the last decade, under some trees that drop crap and harbor birds that drop more crap. Oh, and it’s black. As you can imagine, it looks bad. Lots of scope for improvement, and if we screw it up, who cares?So, the first thing we did was take it to the car wash. No one suggested this, but it seemed logical that polishing a dirty truck would add more scratches, right? My husband then waded in without even consulting YouTube, and immediately got himself covered in polishing compound. This was wrong, of course. Here is the right way: Apply five dime sized globs of polish to the pad. Then without turning it on, press it against the truck a bunch of times. Like sponge painting. Then turn the polisher on, at the lowest speed, and spread the stuff into a light film. Then, turn up the speed and start buffing. Keep the thing moving at all times. Don’t press hard, just use the machine’s weight to give you the right pressure.It works pretty darn well! We removed a lot of minor blemishes caused by brushing against tree branches, places where bird droppings had been cleaned off too late and left paint damage, etc. Despite our complete inexperience, we don’t seem to have added any new blemishes. The truck now looks a little less old.And the standout result is this. My husband used it on the headlights and it removed the haze of age! The lights now look brighter. I suppose we should go to the auto parts store and find some kind of headlight UV protectant, now.Once we are sure we know all the tricks, we will start polishing nicer things. But, so far so good. We like it!
Ariana
Reviewed in the United States on June 26, 2022
The design of this polish/buff kit is very well thought out. I was able to get professional, buffed out results on my black truck and so much less time than it takes me with my drill attachments for buffing. I appreciate how easy it is to handle this compared to a drill as well. The price point of under $70 is a steel because you easily save that much time and money with this car fixed it. If it can make my abused black truck look shiny again then it will sue anybody's needs
Jesse H.
Reviewed in the United States on June 14, 2022
For a solid orbital thrower you need torque and the unit to be well balanced so comfortable as you slide across your target of work. This feels like a really nice quality polisher, and seeing the potential for showroom results as I work on my silverado truck that has been neglected.
Matt & Tracey
Reviewed in the United States on June 14, 2022
This is replacing a polisher that I have had for a while and it is probably 100x better! It has variable speeds, slim body, and includes 3 orbital heads. It is made of a heavy duty ballistic polymer, and feels really good in the hand. It's only 12mm long, with a 7 amp industrial motor. It is very easy to handle but very heavy duty. There is a speed control dial on the bottom, and they can be adjusted from 200-5,000 rpm. The foam pad is 20mm in thickness, the H5 and X2 polishing compounds to remove swirl marks and microgram sanding scratches. It is ideal for repairing OEM clear coats. The X2 gives a super gloss finish. The build quality is very strong and this is commercial strength. I highly recommend this unit!
michael fuce
Reviewed in the United States on October 7, 2022
It work very well. Even with the light abrasive it took out scratches from the scotch rubbing pad I used to try to get pitch off.