Your cart is empty.
Your cart is empty.Promark 3-Section Full Extension Drawer Slides
ks
Reviewed in the United States on February 10, 2025
Work well, good quality, no issues
GoOutside
Reviewed in the United States on May 8, 2024
I have used about 20 pairs of these drawer slides so far, all with drawer boxes and cabinets that I built. Drawer boxes need to be 1" narrower than the cabinet box opening (1/2" on each side). If you are building your own boxes, this means you need to be exact to within a 1/16" error either direction. If your box is the correct size, these slides work beautifully. They roll smoothly and very quietly and are full extension. It's true that the lack of directions in the box is a bit of a bummer, but once you figure out how to install one pair, you're good to go. It's pretty straightforward-- mount on piece to the inside of your cabinet box and mount the mating piece on the outside of your drawer, flush with the front of the drawer box, at the location that will result in the drawer being at the correct height once you slide the drawer in (the easiest is to mount flush to the bottom edge of the side of the drawer box). Anyway, great drawer slides at a great price.And no, they don't come with screws, but is that really a reason to give otherwise-great slides a poor review? Go and buy a box of 100 screws at the Blue or Orange store and get to work!
R Storey
Reviewed in the United States on February 8, 2024
I've installed a lot of these, in various sizes, for various cabinet projects, and I love them. Great value for the money. HOWEVER...the pictured dimensions are incorrect. The diagram shows 36mm tall by 12.7mm thick. The thickness is a full 13mm, which is pretty close. But the height is 44.4mm at the front and 44.2mm at the back. If you depend on the diagram for screw placement (as I did on a CNC project), all of your screw holes will be in the wrong place. Best to measure the slides when you get them, and actually place them on the workpiece to mark screw locations. So 5 stars on quality and functionality, but shame on them for putting up a wrong diagram.
The Hunters
Reviewed in the United States on September 22, 2023
So I have purchased the Promark brand several times. They work without issue, never have bearings fall out, etc.The slide is great, the extension is full 20". Purchased the 20" for a bathroom vanity (those are not as deep as kitchen cabinets ... Usually. Just measure to be sure).Two additional things you should consider when purchasing. Screws and back-brackets.Rail sets normally do not come with associated screws. I purchased 7/16" pan-head screws.Back brackets. Now, if you have walls on left/right side of the cabinet box, then you don't need the holding brackets. I, however, usually have at least one side that does not have a wall to screw it to so I purchased the back-hold brackets that Promark sells (ISBN=B07QNB6BFZ). They work great.
Bdh
Reviewed in Canada on February 14, 2023
Product is good, works great, priced a little high considering they don't supply mounting screws.
D.B.
Reviewed in Canada on January 30, 2023
Well made, installation is easy, 9 screw hole each side different sizes.Product price is amazingFast shipping .*****
Manuel Hoskins
Reviewed in Canada on March 23, 2022
These are sturdy, good quality drawer slides. The only drawback is that they didn't include screws. This is significant because it's sometimes difficult to get suitable screws with a low profile head that doesn't interfere with the operation.
ff5605
Reviewed in the United States on January 6, 2022
When making drawers for cabinets, I always use drawer slides. Further, I always allow for excess weight in the drawer. These slides are full extension and can support 100lbs. Pricing on these slides is very attractive when compared to some of the name brands. When building a cabinet that needs 10 pairs of slides, using slides that cost $15-20 drives the price way up.I had no trouble installing the slides. Keep in mind that the drawer must be EXACTLY one inch less than the drawer opening. There isn't much wiggle room on that. This is true of all slides of this type.I have purchased these slides in varying lengths for the last dozen projects. Users have been happy with their performance. If the client wants soft close, be sure that you find that feature. This particular slide is not soft close.
Bonnie B.
Reviewed in the United States on May 18, 2020
Have them in a custom built-in shop work bench/cabinet with 13 drawers and more to come. The drawers are made of 1/2" plywood, are all 17" long with a variety of depths @ 3" 4" and 7". The widths are 18", 26", 28" & 29". Ordered these twice and both came as promised with no damage. No instructions that I wouldn't have used anyway. Sets of two come in a plastic bag. I didn't have any of the issues reported by other reviewers. They all came apart easily and didn't spit any bearings. Yes, THANKFULLY, they come pre-greased. About the viscosity of Vaseline and nearly transparent. If touching grease bothers you, I suggest using disposable nitrile gloves or a contractor. I did get a smidge on a to-be-finished surface and a touch of mineral spirits made quick work of it. I made a couple of measuring goofs that required removal/re-install. This is usually when a less worthy slide will produce a failure but, it didn't happen here. The units are all consistently sized and produced offering no surprises from one to the other. I did buy and use the suggested #8 x 1/2" Truss Head screws and they worked just fine. No catching, rubbing or jamming. When things get going in the shop, time is at a premium. There is no time to spend on sticky or jammed drawers that don't open and close because of separation, alignment or sagging. I have been beating these drawers like a red-headed step child for about a month now and haven't had a failure. They all open smoothly and close positively with no lifting or twisting needed. They stay closed even with a harder than necessary shove without rebound or roll-back. They are all loaded with a combination of hand tools, power tools, hardware, plumbing/electrical supplies, garden equipment, books, drill bits, jigs, accessories and the like. The only bumps along the road were of my own doing particularly with a vertical drawer. That puts all the drawer weight on one slide while it hangs from the other. These slides are just not designed for that. I think I'll solve by doubling up slides on the bottom...or both...or a redesign. These are good utilitarian drawer slides that fit the bill for us peasants on a budget. They are not the bougouise, soft-close variety for premium, custom kitchen cabs, breakfronts or master bed dressers but, they are just what the doctor ordered for my rough n' tumble shop. If you have a builder-grade kitchen or other cab unit with bottom/under mount euro slides, these would be a sound, significant up-grade without much money or trouble provided the drawers you have are square. If you need instructions, AlGore's amazing interweb is just dripping with them. Enjoy!
Cliente de
Reviewed in Mexico on January 23, 2020
Buena calidad del producto a buen precio, el calibre de la lámina de estas correderas es un poco mas grueso en comparación con otras que había comprado en otros sitios.
Drifter
Reviewed in Canada on February 9, 2018
These slides worked great. Seem o be very good quality; I used them for tooling storage drawers in a heavy duty bench, they are apacking a pretty big load, and seem to work just fine. They don't come with screws, so order them at the same time.
Recommended Products
