Your cart is empty.
Your cart is empty.
Hydraulic Stubby Low Profile Bottle Jack, 50T(110,231lbs)
How to Use
1. Insert the grooved end of the pressure lever into the return valve and tighten clockwise.
2. Adjust the height of the adjusting screw according to the height of the car body.
3. Insert the jack handle into the handle sleeve.
4. Shake the handle up and down to lift the body to the desired height smoothly.
5. When lowering, turn the return valve counterclockwise 1-2 turns, remember to turn slowly, and the return valve can not loose more, otherwise it will lead to oil leakage.
Specifications
Material: Alloy Steel
Color: Red
Process: Baking Paint
Operation Temperature: -20~45°C/-4~113°F
Body Height: 26cm/10.23in
Lifting Height: 15cm /5.9in
Adjustment Height: 6cm /2.36in
Maximum Lifting Height: 47cm /18.5in
Housing Diameter: 14cm/5.51in
Base Size: 18.4*16cm/7.24*6.29in
Product Height: 26cm/10.23in
Gross Weight: 20kg/44.44lbs
Net Weight: 17kg/37.47lbs
Loading Capacity: 50T/110,231 lbs
Packing Size: 20*17*28cm/7.87*6.69*11.02in
Package Included
1* Hydraulic Cylinder Jack
3* Levers
1* English Manual
Notes
1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2. This is a hydraulic jack and cannot be used for jacking or fixing for a long time.
3. It is prohibited to screw out the oil valve, otherwise the use of the product will be affected.
4. Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load. If the jack cannot be lifted, please check whether the oil valve is tightened.
5. Park the vehicle on a level and ha
