Your cart is empty.
Your cart is empty.Product Description
Product Parameters：
Product name: 50A battery quick disconnect/connector connector
Wire length: 50CM
Rated current ：40A
Maximum current ：50A
Maximum voltage ：600V
Temperature range ：-40°C~200°C
Fire rating: UL 94-V0
Package: 50A battery quick disconnect harness plug (1 set of two with wire 50CM)
Glenn King
Reviewed in the United States on March 18, 2025
I ordered these 3 Way Anderson Connector, 50A Battery Quick Connect/Disconnect Connector, Jumper Cable Plug Connector Kit 8-12AWG for Automotive, Winches and Trailers for a specific project that I changed the design of and didn't need the 3 conductors anymore. I use Anderson various sized Anderson connectors on my backup batteries, inverters, and other higher amp (50+) projects and these have the quality of any other brands I have used.
Thomas H. Lawler
Reviewed in the United States on January 16, 2025
Most of these "Anderson" plugs are used with DC connections with just 2 connections. This includes 3 for something like a forward and reverse on a winch or such. I also noted cast into the plastic is "L N" and the ground symbol (as if this can be used for AC wiring with "Line Neutral & ground"). Most don't need a 50A plug and/or go to ones like a range plug versus this for such, but it does say "600V" rating. I like the way they snap together and take more than a gentle pull to remove it so it doesn't come off while just moving the cables or such. It has screw holes to mount at least one end to a firm place and then you plug in the other to it.
Bigm1
Reviewed in the United States on January 10, 2025
I purchased the **GUIRUIMOON Jumper Plug Cable Connector** to replace a similar one that went bad. Initially, I was unsure about the build quality, but so far, it seems to work as advertised. The waterproof feature (IP67 rating) is a definite plus, and the 50A quick disconnect/connector is performing as expected. The 10AWG wire seems robust, and the cable length is just right for my needs. It appears to be a solid replacement, but time will tell if it holds up in the long run. I’ll be sure to report back if I run into any issues down the road. So far, it’s a good buy!
Hittin
Reviewed in the United States on December 5, 2024
This style has been around for awhile and proven itself as a good disconnect. I have always used these in the past for DC disconnects. Mostly for batteries, battery chargers, winches, and sometimes just aux power for whatever, and then you can connect to it at will.The terminals supplied with this will accept 8ga, and they are labeled “8” right on them. The 8ga I had on hand was OFC copper from a car amplifier wiring kit, so I took pics with that as a reference just to show that it fits with a little room to spare. The terminal pins appear to be silver plated copper, so I would expect a good electrical connection as long as it’s crimped well. These are not waterproof. You can add a little bit of silicone where the wires go in the back to help, but they still won’t be waterproof.For this three way disconnect, it’s labeled for line neutral and ground, so that’s geared more towards AC voltage and I wanted to use this for an inverter that I use in different places. Having this on the AC side fits that need for me.
Amazin' Grandpa
Reviewed in the United States on December 3, 2024
This plug matches the quality and dimensions of other similar (50A, but 2-position) disconnects I have, but with the advantage of having the 3 connections so it works for a DC brushless motor. The terminals are easy to insert and remove in the housing, as they should be, and the connectors latch securely together. I found that fine-stranded 8awg just barely fits into the provided terminals.One minor surprise was that the reverse side of the cover is labeled "L", "N", and ground (using the ground symbol, not letters). This isn't shown in any of the pictures (this labeling is not really relevant to what I'm using these for, but it's nice if you were using this for an AC line disconnect).
Robert Hare
Reviewed in the United States on December 3, 2024
These Anderson SB50 compatible wall sockets provide a strong connection point for a 50A pass-through electrical connection. The size and construction of these sockets provide a secure plug in point. Construction is strong. Installation is simple.
Shane Ravenbane
Reviewed in the United States on November 28, 2024
Reviewing:GUIRUIMOON 50 Amp Battery Connector Plug Battery Quick Connectors 6/8/10/12 Battery Quick Disconnect Connector 12 Volt for Marine Winch Vehicle Trolling Motor (3 Way Ads Kit 2). These are great! They appear to be very well made, and installation was as easy as 1, 2, 3. Literally. 1. Strip the wire. 2. Crimp the pin onto the wire. 3. Plug the wire into the connector until it snaps into place. I used them for a quick disconnect between a battery isolator and the primary and auxiliary batteries. Using the screw holes, I mounted one side to a bracket, so when plugged in, the connector doesn't move. Definitely worth the price.Pros:• Easy to install• Looks good• Good quality• Works perfectlyCons:• The listing says 16 - 6 GA. wire. I used 6 GA, and it was ideal, but I can't see how you would successfully crimp even 10 GA wire into the pins and get it to stay, nevermind 16 GA. Maybe it's just me, but I would only use these for 8 - 6 GA. wire.
A.J.
Reviewed in the United States on November 10, 2024
Quickly and simply connect a winch to a battery or to your truck. This was a perfect solution to get my winch on my truck easily.
Recommended Products
$28.59
$ 12 .99 $12.99