Your cart is empty.
Your cart is empty.The EX connector is designed with a compliant co-polymer body to achieve a universality on 60% of braided cable to Quad cable. The EX connector was designed with the challenging requirements of IP Telephony and High-Speed Data.
Luiz Ferranti Neto
Reviewed in Brazil on February 28, 2025
Muito bom. Qualidade nas conectorizações.
willie keener
Reviewed in the United States on January 10, 2025
Quad core coax is not common. Repair parts even less so. Served my purpose.
ZOOM
Reviewed in Canada on September 7, 2024
Se connecte aisément avec l’outil recommandé.
Bradley Schulz
Reviewed in the United States on August 11, 2024
Same fittings that cable companies use/have used in the past. They do what they are supposed to do and get the job done without any leakage or signal loss if installed properly.
Domingo Morgado Gomez
Reviewed in Mexico on July 5, 2024
Muy funcionales
claudio alcantara jimenez
Reviewed in the United States on July 31, 2024
Nice
simonsays331
Reviewed in the United States on May 29, 2023
Works great with TruCables Quad Shielded direct bury cable. I tried these along side TruCables and channel Masters connectors and these performed just as well. I didn't have one bad connection. I would buy these again without hesitation.
Al
Reviewed in Canada on March 17, 2023
The description states these are EX6XL.The actual product being sold is EX6XLPlus, which is a different PPC product.The photos of the product do not match the product described in text.Consult PPC online info for differences between their products.
Customer
Reviewed in the United States on July 30, 2021
The RG6 I find installed in my house is double-shielded. Preparing the coax as described does not work, because the RG6 cable does not enter the inner pipe deep enough, and the compressing tool pushes the cable out of the connector instead of inserting the inner pipe into the cable.On YouTube I found instructions of how to do it properly, which adds an extra step between the prep of the cable and the insertion into the connector, i.e. inserting the cable into a special tool that widens the shields sufficiently. After that, the cable inserts easily into the connector until the insulator is flush with the front of the inner pipe.The tool is made from a new or failed RG6 connector by breaking off the plastic part until only the inner pipe and the nut remain. The barb at the end of the inner pipe is ground off by hand or on the drill using a 3/16" mandrel, and the nut is fastened on an old drilled-out F connector that was glued into a handle. This tool is then inserted under rotation between the inner core of the coax and the wire meshes. and loosens the meshes sufficiently for the proper assembly on the connector.
Jeremiah
Reviewed in the United States on June 27, 2021
I love these connectors. Super quick and easy to use. Using these, I was able to run free over the air channels with an outdoor antenna to every room in my home. Great product!
Jean
Reviewed in Canada on October 11, 2021
Connecteur BELDEN utilisé par VideotronPopulaire dans l’industrieJe recommande🌟🌟🌟🌟🌟
J. Espinosa
Reviewed in the United States on April 24, 2021
PPC is one of the better cable connectors out there and are commonly used by the cable company's. If you strip your wire correctly these will work on both dual or quad cable. The key works here are strip correctly. Unlike connector specifically made for Quad Cable these are less forgiving you have to know how to strip Quad if you do it right then these will go right on. If you are trying to use these on older quad cable they may not work as well as quad only connectors but I never had any problems with the new stuff.
Auto Electric+
Reviewed in the United States on August 4, 2018
I really like these. I go through a lot of these connectors. You know you'll have a good tight fit, every time. I've bought some before, that after you crimped them, the bottom ring will come off. These are solid and well worth it, I will buy these again.
Recommended Products
