Your cart is empty.
Your cart is empty.Product Description
50 pcs Self-Tapping Threaded Inserts Combination Set
Slotted Threaded Inserts M3 M4 M5 M6 M8 M10 M12
The package includes:
- 10 x M3 * 0.5 thread insert
- 10 x M4 * 0.7 thread insert
- 10 x M5 * 0.8 thread insert
- 5 x M6 * 1.0 thread insert
- 5 x M8 * 1.25 thread insert
- 5 x M10 * 1.5 thread insert
- 5 x thread insert M12 * 1.75
- This self-tapping thread insert has a cutting slot on the head of the threaded sleeve, with high strength and wear resistant threads. The cutting groove has the characteristics of self-tapping, ease of transfer, high impact resistance and anti-drop performance
- Self-tapping inserts do not need to be tapped in advance. They can be screwed directly into the special holes reserved by the base material with an installation tool, which is economical and beautiful. They can also increase wire strength for new products, which are used throughout the metal and plastics processing industry.
Self-Tapping Threaded Insert Installation Method
- Method 1:
- When the number of installations is small, the simple installation method can be adopted. More precisely, the method of corresponding specification bolts + nuts is adopted, and the self-tapping screw sleeve is attached to the corresponding screw, and the same type of nut is used to fix it, to make the three into one whole, use a wrench to screw the screw sleeve into the bottom hole, then remove the screw.
- Method 2:
- 1. Make a hole. Depending on the material of the part, select the hole diameter range.
- 2. With the slotted end or the three-hole end facing down, install the self-tapping screw sleeve on the front end of the tool and press it vertically against the workpiece, turn the wrench to lock it. turn in the lower hole.
- 3. After inserting it into the specified position, fix the hex part of the tool with a clamping plate, and then reverse the wrench to separate the tool from the workpiece.
Recommended Products