Fit and finish are excellent. Appears strong and machined perfect. I will buy again.

I feel the scope rings are a high quality. I love the gide pins to there is no biding or twisting! They are either laped or polished in the inside. Tourch specs and matching numbers so they go on ever single time the same way! Very nice!!

I bought these rings and I was a little skeptical because I never heard of the brand before. I went on ahead and ordered them and picked them up from a drop box. Soon as I opened them I knew they were a solid buy based off how they look and felt. I like them because the star screws are bigger than normal scope ring screws so they won't strip out easily under torque. When I torqued them down on the 20 moa rail they didn't even feel like they wanted to break or strip. The 4 screws on the top half of the scope ring are super solid as well and felt the same. It comes in a hard plastic case with a star screw key and 2 extra screws. My setup is a Tikka T3 Tactical, KRG Xray chassis, 20" 6.5 creedmoor barrel, 2port Hellfire brake, Accutac SR5 gen2 bipod, Leupold 20moa rail, and a Athlon BTR gen 2 8-35× scope. Everything looks sweet together a collective. I think it's a great value for the money.The only thing I will say is the black finish isn't as flat some rings or scopes. It's more of a satin black finish. Other than that solid buy...........unless you torque them down so much you cant see daylight through the spaces on side of the rings 😀. DO NOT use a foot lbs wrench, use a inch pounds wrench

Great product besides it not fitting the stock rail that comes with the Ruger 10/22 model 1103 rail that comes with the rifle has smaller than normal grooves not allowing the square dump downs on the bottom of the rings to sit within the rail. I was able to successfully grind them off as they are only aluminum to allow for a flush fit, where they keep zero is going to be the question overall a quality product.

I've got these on a very accurate rifle, and I'm pleased with them. They're sturdy and nicely machined, the screws are good quality. Printed torque values are a nifty touch. The rings work well and look good. I feel that I could have easily spent twice as much and not gotten a better product. I've bought 2 more sets of these, and a cantilever mount from this brand also. Well pleased.

I have installed rifle scopes on over 25 rifles. These scope rings are simply the finest, most beautifully machined rings I have ever used. I will use these on any future scope install and I am considering retrofitting many existing guns with these rings. They align perfectly, pinned assembly which is incredible for strength and accuracy. Matched marked, torque spec and torque sequence identified. I simply cannot ask for more. Packaging is also impressive. Highly recommend these rings. They may seem a bit pricey, but once you see them, the quality, form and fit says it all. Worth every cent. Will buy many more.

I just mounted my scope and am pleasantly surprised by the quality of these rings. Out of the box, they seem really nice and well machined. Torqued them down and they didn't bind at all, great alignment. So far these are way better than the price point. I would rate them up there with Vortex, Warne, or Burris. Not as good as ARC rings but no where near the cost of ARCs. Time will tell if these hold up, but for now these are 5 star rings.

Bought the 1 inch Low profile Rings to go with a 42mm objective lens Vortex Diamondback.This is sitting on a Savage bolt action rifle that has a picatinny/weaver rail on it. Perfect fit with a little room to spare!!!These rings are so nice and so thoughtfully built I want to replace most of my existing rings with these!!!The quality is fantastic!The screws are the same for the ring caps as they are for the base clamps so you don't need 2 different screw driver heads to fasten them, AND you get 2 extra screws in case you lose any!They also put the inch/bound markings for the screws so you know how much pressure to apply with the torque screw driver! The ring caps state 20 in/lbs but my scope instructions said to not exceed 18 so I went with the scope max vs the ring max so keep this in mind when putting your scope on.The index pins and the screw numbering for fastening was another nice touch with the labeling that make these a dream to easily secure in place without lopsided scope ring tops existing.Now on to the best info, per the title of this review.These are LOW rings for a 1inch scope tube sitting on a 20moa picatinny rail on my Savage bolt action rifle.In the picture there is roughly a 1/8th inch clearance between the end of the rail and the scope as the scope widens to the 42mm object lens size.I can't see how proper placement on the rail would ever have have the widest part of the 42mm scope lens positioned over the rail, but if it did I think there would still be a tiny bit of clearance available (1/8th inch or 3.175mm).If you have a 44-45mm objective lens scope, I think you would still clear the rail if placed about like my setup is but it would be a slim cap and it would depend on your eye relief affecting how far back you have to position your scope.I mean c'mon the whole point of having rails on these bolt actions is so you can adjust a scope forwards or backwards to get the perfect eye relief so you pick up the rifle and are right in the scope on target without having to move your head/eye backwards or forwards to get the sight picture right.As you can also see in the picture there is plenty of clearance before getting to the barrel.If you are savvy and capable of doing a some small time but accurate metal cutting, you can get away with cutting the last notch off the rail to buy some more space for a 45mm+ objective lens scope and using these low rings.I don't have any decent tooling to make such a cut look right and be square but if I absolutely had to I could but the rail with a hacksaw or a dremel and a metal cutting wheel and file the edges smooth.I prefer not to do such a thing though and have no need because I like to stay with 40-45mm objective lens scopes. I don't do any long range hunting beyond a 225-250yd shot so no need for those big 50mm+ objective lens scopes with more magnification than 16 power.More useful info.The bolt easily clears the scope with no issue. My bolt handle is oversized so if I need more room I can easily work it underhanded versus having to wrap my thumb and index finger around it to work it but a thumb and index finger grip should work as well for a Savage with a rail and these rings.I think some other reviews of another brand of rifle had issues clearing the rings, but I also don't think they put a rail on their bolt action rife, and the rail gives so much more room in general.To me all rifles need a rail to ensure you can place a scope on them to get the proper eye relief. Why spend all that money on a rifle and a scope to not be able to easily see through it. Especially if you are trying to put meat on the table and are wanting to do right by the animal. Getting a rail makes life easy whether you are big, small, young, or old.For context, I have and use some well known, great quality, rock solid, 1 piece mounts/rings like the Burris PEPR, Leupold, Lucid, and others. So I have a little experience with good quality rings/mounts.For individual rings I mostly go with the humble and adequate $20-$27 UTG/Leapers and they do fine, but these DISCOVERYOPT rings blow the UTG ones away! There is no contest and the price point is just right for the amazing quality and features of these DISCOVERYOPT rings.From now on when I upgrade scopes using individual rings, I am going to also upgrade to these rings unless for some good reason I need to move to a steel ring, but there are no >realI like to ensure my rifles are working with reliable entry level scopes before I upgrade the scope to a better scope. No matter if it's a lesser but humble upgrade to a Vortex Diamondback or an upgrade to a whopping Leupold Mark 5. I think these rings will become part of that upgrade as well. I hope this rambling bit of info helps someone out there.