Your cart is empty.
Your cart is empty.Product Description
Features:
- Meets or exceeds OEM standards, not genuine.
- The IPR Valve is responsible for controlling the output pressure of the high pressure oil pump.
- Failure of the IPR valve can cause a multitude of drivability symptoms including no-start conditions.
- Excessive buildup of shavings on the IPR inlet screen will cause the screen to collapse which will allow particles into the IPR valve causing it to jam.
- If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve.
- The kit helps to prevent having poor idle, stalling and no-start condition of your car.
- Please make sure the kit can fit for your vehicle before placed the order.
Specifications:
- Item: Injector Pressure Regulator IPR Valve
- Engine: 7.3L V8 Diesel Powerstroke Turbocharged
- Package Size: 5.91 × 2.95 × 2.95 inch
- Weight: 280g/0.62 pounds
Package Included:
- 1 x Injection Control Pressure Sensor
- 1 x Injector Pressure Regulator
- 1 x Pigtail Wire Harness
Compatible with Ford:
- Compatible with 1997 Ford F-250 7.3L
- Compatible with 1997 Ford F-350 7.3L
- Compatible with 1999-2003 Ford F-250 Super Duty 7.3L
- Compatible with 1999-2003 Ford F-350 Super Duty 7.3L
- Compatible with 1999-2003 Ford F-450 Super Duty 7.3L
- Compatible with 1999-2003 Ford F-550 Super Duty 7.3L
- Compatible with 2001 Ford F-650 7.3L
- Compatible with 1999-2003 Ford F-750 7.3L
- Compatible with 1997-2002 Ford E-350 Econoline 7.3L
- Compatible with 1997-2002 Ford E-350 Econoline Club Wagon 7.3L
- Compatible with 2003 Ford E-350 7.3L
- Compatible with 2003 Ford E-350 Club Wagon 7.3L
- Compatible with 2000 Ford E-450 Econoline Super Duty 7.3L
- Compatible with 2001 Ford E-450 Econoline Super Duty Stripped 7.3L
- Compatible with 2002 Ford E-550 Econoline Club Wagon 7.3L
- Compatible with 2000-2001 Ford Excursion 7.3L
Replace Part#:
- F81A9C968AA
- F81Z9C968AB
- F81Z9C968AA
- F81Z9C968AB
- F81Z-9C968-AB
- F5TZ9C968A
- 1829856C91, 1836412C91, 1841086C91, 1841217C91
- CM5013, CM-5013, AP63402
K, John
Reviewed in the United States on January 17, 2025
Horrible quality, icp sensor threaded in, but unverified if it even works. IPR pictured on right in comparison to motorcraft on left. Absolutely terrible machining, would not even start to thread in. Had to spend $240 at AutoZone for one and I still have the icp sensor from this kit installed and truck still won’t start. It’s a disgrace, orings were the best part of this kit. Pig tails are cheap, the wire clips had to be rebent to hold everything together. Altogether a total waste of time and money, don’t buy it.
Kimberly
Reviewed in Canada on September 24, 2024
Worked great !
Lyndon Wester
Reviewed in Canada on July 15, 2024
It's nice to get cheaper parts that work !Solved a problem we had with a 1997 Ford Powerstroke and erratic IPR signal.
D J
Reviewed in the United States on May 16, 2024
Great price came on time stop working after after few days, but they gave me a refund
Pat (Nappie)
Reviewed in the United States on January 24, 2024
Fixed his truck and he likes this part
2000 7.3
Reviewed in the United States on November 24, 2023
Bought them for backup. Because I had a motorcraft h pop last 300 miles. So I thought if an expensive one only last that long, why not get a cheap set and see how long it lasts?
Cliente
Reviewed in the United States on October 7, 2023
muy bien
Michael R.
Reviewed in the United States on October 10, 2023
Good Price
Johnny Decker
Reviewed in the United States on July 15, 2022
I was stupid to think a part that cost $60 for both parts and wiring . That every part store and ford sell for over $2-300 for just IPR could work ! I opened box and ok didn’t look bad but go to install and here we go both parts I had to tap the treads again because there treads wasn’t even trying to start no we’re close. So I did that and the IPR didn’t even work I can’t tell u if the other parts was any good because I know longer have them parts . I returned them back to the landfill we’re they had to come from because they was garbage. I wasn’t sending them back so they could sell them to someone else. I would rather walk! I understand I get what I pay for yeah yeah but I payed for a working part because it doesn’t say it doesn’t work or I wouldn’t have got it RIGHT!! To you the ones that are making selling this box filler I am not mad at you I love you all . But I hope u can change this a little and make it work .I don’t like writing reviews like this because if I am . That’s means I got another bad part. Lol good luck much love!
Customer
Reviewed in Canada on December 7, 2022
dislike the heat shrink tubing provided, junk they would not shrink, burn first or melt. so tossed away. solder them and use 3;1 shrink tubing with adhesive. color of wirers don't match fords wiring harness so observe how and where the colors line up to plug insert, being 3 wires easy to do. take your time it's not a race.2000 ford f250 super duty supercab 4x4 diesel. 1,594,384km still rocking
Roy
Reviewed in Mexico on October 2, 2022
No funcionó a la camioneta por la calidad
gray pinnell
Reviewed in Canada on April 24, 2022
Nothing worked. The ICP was cross treaded and the IPR did not work..thats what i get for trying to save a buck................Dear customer,We're sorry to bring you a bad experience, we will value your evaluation of the product and improve the quality of the product.We would also love to solve your problem, but since your order is fulfilled by Amazon, if you want a refund, you need to contact Amazon customer service and they will tell you the process of refunding.If you still have questions, please feel free to contact us.Best wishes.Soooo thanks but sry go talk to someone else...I did not ask or look for a review, It kept popping up on email so i filled it out,then you send me more emails and finely you tell me you cant do anything anywaysAND MY WORK TRUCK IS STILL NOT WORKING!!!
Edgardo Ramos
Reviewed in the United States on June 24, 2021
It could have been better lock nut than the one that come loose with vib
Recommended Products