Your cart is empty.
Your cart is empty.Product Description
Universal 8 Gang On-Off Switch Panel Electronic Relay System
Power up to 8 sets of light & accessories from one place and at the same time.
Additional Features
Backlit Brightness Adjustable
Connect the "White Wire" to the Width/Position Lamp or ACC or Car Cigarette Adaptor, the backlit brightness can be adjusted in 100%-20% brightness.
Waterproof Design
IP67 waterproof rate, the switch pods are totally waterproof can be suitable for use on boats and in marine environments.
Multi-position Installation
Come with 2 sets of mounting bracket for choice, it can be installed in anywhere:
1. Angle adjustable mount bracket
2. Slim line flush mount bracket
ALL In One
Contents everything you need for installation and use, no need to by extra parts!
Sandra Soler
Reviewed in the United States on March 7, 2023
This board makes it very easy to add lights and other components to the vehicle without having to run a huge maze of wires to the front. I have a bumper bar, roof bar, fog lights, Rear E-locker, Winch (controlled with a huge 500A relay), and side flood lights.My unit came with 2 of the relays always open. I didn't find out until a year after the purchase as I was adding components little by little. A couple of emails to customer service and they send me a complete unit as a replacement.
Hamad
Reviewed in the United Arab Emirates on October 11, 2023
Wasnt work
Abdulhalim
Reviewed in the United Arab Emirates on January 26, 2023
At First the item Building is Solid metal which is great but also feels a bit over kill and heavy.when opening the Fuse box you start noticing that the whole thing is drenched in Gray plastic material, even the fuses are hard to pull out and put in !also you notice that the Extra Fuses and the fuse plucker Not Included !Also the indications of ( + and - ) like in the pictures is actually not true.the instructions on the box are not clear and not very friendly.Over all looks Ok for the price and not very hard to understand and work with. Still Needs some pro help.I will install it on my car then provide an update.
K. A.
Reviewed in the United States on December 27, 2021
I decided to suck it up and buy this..Buying a Relay box and Relays and Switches was about the same price as a complete kit.Wire was way too long, I shortened all the wires to suit my application this is not needed but It was rather easy ..Having made all my Switch panels in the past this was a dream , Connect to Battery Power connect to accessory and then connect to LED lights and Lockers so so so easy..The Only downside was my stickers were folded so some did not work but that was minor ..Well worth the money and looks super great mounted on the Roll cage
Sport truck
Reviewed in Canada on January 7, 2021
Works pretty good has a on and off switch on display but doesn’t seem to do anything would be nice if that was used for the back light. Nice product otherwise I run the viair 10007 kit off this and works very well. Along with some lighting and winch power power on switch.
falshamsi
Reviewed in the United Arab Emirates on January 14, 2021
ممتاز
Customer
Reviewed in the United States on July 10, 2020
Eliminated a lot of wires on my LED setup which is why I purchase this. Picture of installation is great and simple but three things the manufacture should fix to make this unit a lot better for the price where paying:#1, The relay box doesn't show which fuse is for which. What I mean by that is when you take the cover off the relay box and look inside the cover you take off, you don't see any label to show the relay diagram like how every vehicle has to identify each fuse.#2, Theres no way in telling which button is from 1-6. It's common sense from 1-3 from left to right on top then 4-6 from left to right on the button switch but this should be in the instruction.#3, The button switch is really bright at night (green). It's fine for some people but to make this better is the button to have a light dimmer switch or a low, medium or high brightness switch.Overall, this unit is great. Time and usage, well see how low this unit will last.
David VanHorn
Reviewed in the United States on December 24, 2020
The pictures don't do this thing justice. My only proviso on this review is that I have not yet installed, but that will be happening ASAP.The mounting bracket are not the usual thin cheap metal that I see on similar products.The cable to the control head uses a round connector which minimizes the hole size if you need to drill, as opposed to a rectangular connector.The switching module is completely potted, which speaks well to mounting in the engine compartment or anywhere it might get wet or dirtyFuse LEDs light when the associated fuse is blown, and I LOVE that there are spare fuses (provided!) and the fuse tool mounted under the cover.The battery terminals are nicely separated.The enclosed 60A circuit breaker is a nice bonus.The screws and such are of average quality, you might choose to use stainless steel rather than these.I am an EE, and I specifically chose this because of the use of IGBTs rather than relays, as well as just the whole impression I got from the pictures and manual.My only negative comment is in the start of the manual where they talk about the red and white wires. I understand now that the "Width lamp" means running lights, but I'm still confused as to why there's two wires here. I would suggest a revision to the manual to clear up this point, maybe a youtube video to show it.While I haven't installed it yet, (it only arrived about 15 mins ago) I am very impressed so far.This is SO MUCH better than running high current wires from the battery to the control point, through a relatively huge switch (for the current) and then back out to the load. Relays fail eventually, especially if powering an inductive load like a motor. The contacts get pitted and increase resistance over time causing heat, and they can end up welded together causing the load to be constantly on. IGBTs don't do any of that.One wish: More variety in the sticker pack! I'm powering an inverter on one switch, radios (ham and CB) on another, lighting, and other camping/RV loads. The sticker pack provided is heavily biased to vehicle lighting. I'd cheerfully pay for a different sticker pack if it was available, or maybe some way to make my own stickers?One thought with my product designer hat on: If I did this project, the panel leds would be off till you touch any button. That would not power up the load for that button, it would just turn the panel leds on. If no other button is pressed, then timeout and fade the LEDs to off.. While the panel leds are on, any button press turns it's load on or off as you would expect. When all loads are off, after a delay, the panel leds fade out.I'll check back in once this is installed with any further input, but so far guys, bonus points all around!
jonathan
Reviewed in the United States on November 25, 2020
One of the better switch pods Ive used. Instruction are vague but install is simple for someone with a little experience. Well built Control unit looks to be water resistant. Multiple mounting options allows you to install in tight spaces. Control unit is 1 1/2in thick so its easy to clear the hood. Only cons I see are the ultra bright green switch panel and the stickers for the buttons. Switch panel is supposed to be dimmable but havent figured it out yet. Make sure to connect the red/white control cable to your running lights so you dont drain the battery.
Ryan Bradley
Reviewed in the United States on November 25, 2020
Pros1. It is very easy to install (aside from the acc wire)2. It's cheapCons1. The green LEDs on the 6 gang switch are WAY to bright. ( To dim them down I opened the switch and applied black plastic dit to the green LEDs helped a ton)2. I wish the light power connectors were screws inside the fuse box instead of crimp connectors sticking out the side.3. The acc wire is ran with the main power wire, now I have to cut it out of the heat shield so I can run it to my fuse box. The wole system will not work without the acc wire.
bobcopro
Reviewed in the United States on October 1, 2019
Nicely built solid unit. Roughly 8ft control wire between switch head and controller. Both pieces feel solid and made out of aluminum. Both units give you mounting options which allows for a nice looking install. Works well and has some memory functions like remembering which units were on. You must test which fuse goes to which switch. With the total lack of useful instructions there is no other way to know for sure. Also, the amperage rating for the circuit determines which switch you can use, so it may be difficult to have things grouped together the way you'd like. The last two issues are the only reason I didn't give it 5 stars.
Recommended Products
$194.14
$ 84 .99 $84.99
$71.95
$ 29 .99 $29.99
$339.67
$ 99 .00 $99.00
$30.88
$ 14 .99 $14.99