Your cart is empty.
Your cart is empty.Product Description
Brad W.
Reviewed in the United States on September 19, 2024
I installed the clutch and ran the vehicle just a few days. I did all the right things by adjusting the air gap and assuring the wiring was well-placed to avoid damage. It caused the fuse to break, and when I replaced the fuse it immediately broke again. It looks as though the coil melted down and it threw melted black crap all over. If the clutch is disconnected and the vehicle is run, the fuse will not break. There is no warranty information and the return policy was such that I missed it by a day. I wrote a review and the company has contacted me to offer help. I requested a replacement and await another. I will update as things change.
Chris
Reviewed in Canada on August 20, 2024
It fit our 2010 chev express 2500 4.8LWorks as it should, we installed yesterday. Just the plug we swapped with the old one like others state.
Rob
Reviewed in Canada on July 20, 2024
Like most comments say the plug clips are different. But it does plug right into the stock plug and works. I zip tied mine closed to aid as a clip. Be sure if u see that the clutch disengages and has a slight spin with the engine running. You will need to add the other thin washers that come with it. I needed all 3 washers i think that came in the kit. Now when clutch disengages it does not slowly try and spin.Easiest way to take the 10mm bolt off is engage the clutch with a jumper wire and with the belt still on 30+87 on the relay.
Customer
Reviewed in Canada on May 12, 2024
Only problem is what everyone else says the plug/connector doesn’t match the original but all you have to do is unpin the old connector and swap them over. Everything fits and operates as it should
Rene Jimenez
Reviewed in the United States on March 26, 2024
Fit and work great only thing it needed was thicker spacer’s to get the correct gap and pigtail connector was the wrong one.
Yelena Pajon
Reviewed in the United States on November 21, 2024
I'm install it and working for couple days but the coil burn out, SO no good quality.
Scott B.
Reviewed in the United States on August 17, 2023
Mechanically this appears to be a good clutch. It came with all of the right components (bolt, shims, C-clips) for my 2009 Escalade ESV and the installation was "typical". No mechanical surprises.Unfortunately, the connector was slightly incorrect for my vehicle. It mated and sealed properly, but the retaining clips for the harness connector didn't mate with the tang on the clutch connector. This was annoying, but not a huge deal for me. I was able to use a zip-tie to secure the connectors together and "they aren't going anywhere".I shimmed the clutch for proper clearance and it is working correctly.
troy jeppesen
Reviewed in the United States on August 5, 2022
False advertisement. It’s the wrong clutch for 2010 5.3 suburban
Victor
Reviewed in the United States on March 13, 2022
All this work just to realize the clips are different and doesn't fit very unhappy for all the work and time I've spend to get this in and work on it for the Amazon recommendation saying it's the one for my truck just to show and prove it's not the one for my truck money and time spent very unhappy
Recommended Products