Your cart is empty.
Your cart is empty.Product Description
Universal Motorcycle Odometer Tachometer
- Tachometer and odometer combined into one, a high performance kit for motorcycle.
- Suitable for most DC 12V motorcycle. Directly replace for the old or broken one.
- Made of electrical components that adopted chip technology, stable performance and high precision.
- Aluminium alloy shell with clear lens, waterproof and impact resistance, allows to withstand slight collision.
Different Color Modes
- Digital LCD screen display, which can indicates your speed precisely, enhance your road safety.
- Anti-dazzle backlight display, easily viewing at all angles during lighting conditions or in the darkness.
- Backlight with a total of 7 colors, can be freely switched in the odometer 0D state by pressing the button for 3 seconds to switch the backlight color.
Wiring Connection
- Green wire connect to negative
- Black wire connect to speed gauge
- Blue & White connect to backlight
- Black & Red wire connect to oil gauge
Don
Reviewed in the United States on July 21, 2024
I like the speedo, but should be delivered in MPH in US, not Kilometers. No instructions on how to change included. Please advise how I change to MPH. Thx
Hugo
Reviewed in Canada on February 24, 2024
The bracket is very weak but the speedometer itself is pretty good and accurate. Installed it on my Suzuki DR650 and even in broad daylight the screen is readable.
justin m fultz
Reviewed in the United States on June 21, 2023
Last 3 start up on a motorcycle, don't waste your money on this.
Client d'
Reviewed in Canada on May 23, 2023
Excellent
Ian
Reviewed in Canada on June 23, 2021
There is white particles inside lens (will need to disassemble to clean) and there are scratches in the black coating from delivery( box inside envelope was crushed).
Gabriel Galdino
Reviewed in the United States on November 7, 2021
Looks good, plenty of display colors. Only down side is that the fuel bargraph is partially covered by the bezel. Easy to program. If you can't program you shouldn't be working in your bike.Green is negative, black positive."HOW TO SETTING":1. Backlight Switch： press the button in the ODO state for 3 seconds to switch the backlight color2. KM/H MP/H Switch : Press and hold the button and then turn on the bike. The screen displays P0000. At this time, ones place 0 will flash, long press until tens place 0 flash,then short press to make tens place display 1,Then long press until hundreds place flash ,And short press 6 times to display 6. Long press until thousands place flash, Short press 6 times to display 6, then the screen shows 00466, this means 46.6HZ corresponds to 60KM/H. Short press to skip this step , then the screen displays 1001,1001 means KM/H, if you want to switch to MPH, Lond press switch to 1002 , Which indicates that you have set it to MPH.3.Cylinder Setting .Flowing the above steps. Short press the screen to display 2002, indicating that this is a 2-cylinder (166HZ corresponds to 10*1000RPM/MIN). Short press skip to the next step.long press untiel ones place flash, then long press to make the 2 swtich to 4 ,which means 4 cylinders (333HZ corresponds to 10*1000RPM/MIN), short press to skip to the next program.4. Fuel Level settings. Follow the above steps, short press the until screen displays 3002, which means that this time is a 2-line oil meter, short press to save all settings and exit, long press until ones place flash, and then long press to display 3003, that means has switched to 3-line oil gauge.
Recommended Products