Your cart is empty.
Your cart is empty.Product Description
Protect Your Vehicle
Rinse Aid
Adam’s Rinse Aid is a versatile, concentrated solution to quickly and effectively seal and protect all automotive exterior surfaces in a minimal amount of time and is sure to become a staple in your washing process.
-
Adam's Rinse Aid will quickly and effectively coat all your exterior surfaces with protective power.
-
You can easily spray on and rinse off this formula to effortlessly seal and protect your vehicle.
-
Amplify the slickness, gloss, and hydrophobic behavior of your vehicle's surface.
-
Rinse Aid provides lasting gloss, shine, protection, and water repellency for your vehicle.
-
Enjoy ease of use, whether you use a foam cannon with a pressure washer or a foam gun with a hose.
-
Use Independently Or In Tandem With Other Products
Adam's Rinse Aid can be used on its own as a protectant or can be applied with other products to customize your level of protection. After you have put on your favorite wax, sealant, or ceramic coating spray, follow up with Adam's Rinse Aid to witness added polish and shine.
-
Increase Hydrophobicity
In addition to being a protectant, Adam's Rinse Aid can also be used to increase hydrophobic behavior. Water-beading helps avoid potential streaks or spots form on your vehicle after a wash. Watch the water melt off of your vehicle after using this product. Enjoy a quicker and more effective detailing routine!
-
Complete Vehicle Protection
Adam’s Rinse Aid can be used on all exterior surfaces including glass, plastic, paint, and wheels. Safely and effectively protect your entire vehicle.
Instructions For General Use
-
Step One
Prep Your Vehicle
Following washing the vehicle and while it is still wet, add 2-3 fl oz of Adam’s Rinse Aid to Foam Cannon/Gun Reservoir and dilute to volume with fresh water.
-
Step Two
Spray The Solution Onto All Exterior Surfaces
Spray or hose Adam’s Rinse Aid solution over entire vehicle including paint, glass, wheels and plastics – this solution can be applied to all exterior surfaces safely and effectively. However, do not let the solution dry on the surface or residues could manifest.
-
Step Three
Rinse Clean
Once all surfaces are sufficiently coated, disconnect Foam Cannon/Gun and switch to fresh water and rinse all excess material off the surface thoroughly or proceed immediately into drying.
-
Step Four
Towel Dry
Either towel dry or use forced air to finish drying the vehicle completely. Drying properly will help avoid streaks or spots.
George
Reviewed in the United States on March 2, 2025
Was able to immediately see the hydrophobic protection after applying on a warm winter day, with my portable pressure sprayer with its attached foam cup. I did wash my car first. In the foam cup, I only filled maybe 1/8th with Adam's Rinse Aid before adding in water. Initially I wasn't sure of the outcome since the portable pressure washer that uses a bucket is weaker, but turns out it's good enough for this.Nice that they included a squeeze sprayer although I don't see how that's useful, since you're always supposed to dilute rather than spray full strength from the bottle. Perhaps after the bottle is eventually empty, when I buy more Adam's, I can use the empty bottle w/the sprayer for even quicker treatments.
PokeChampRED
Reviewed in the United States on February 21, 2025
I feel like I waste a little when using it in my foam cannon versus mixing it in a spray bottle. It did work well and the glossy blueish gray paint on my Mazda looks really vibrant. It worked well in combination with a full detail, but I can see it working for touchup detailing as well.
Barrettfab
Reviewed in the United States on February 14, 2025
Stuff works great. I follow the directions and blow off after with a leaf blower and leaves my paint nice and slick without water spots
TheDadBod
Reviewed in the United States on February 12, 2025
This rinse works very well and is an easy and effective way to take your car washing prowess to the next level. I have found that it works best when applied using a foam canon before the final rinse. Once applied, simply rinse and dry. The water just beads up and rolls away, and ensures water spots form must more slowly (if at all) when washing in warmer weather. Overall, a solid value at the price point.
TK
Reviewed in the United States on January 14, 2025
Creates alot of foam that sticks and breaks up dirt. Makes it alot easier to wash vehicles. Honeslty didnt expect it to work so well. Will continue to use this product.
Customer Review
Reviewed in the United States on December 7, 2024
Our cars are ceramic coated, but even so, I can tell where water is left over and dries out after I wash and dry them.Using Adam's Rinse Aid in a foam cannon helps keep the water spots at bay. Just foam on, rinse off, and blow dry, and I'm left with a surface that only needs a glancing wipe with a towel to be completely dry. Nothing left behind but a glossy, water resistant finish.This is now a must have addition to my weekly maintenance wash process. Another great product from Adam's!
Alexandra Baker
Reviewed in the United States on November 2, 2024
I’ve used a couple different spray waxes in the past and this by far exceeds my expectations I’ve had it on both my cars for about 2 months and it still works like the first day I put it on especially on the glass which is nice when it rains. I definitely recommend this product to anyone thinking about a spray wax
C. Heisten
Reviewed in the United States on October 23, 2024
We had a warm spell and I decided to take full advantage of it and do a last good wash of my car before winter. I was very happy to be able to put this extra bit of protectant on my car.I did a wash with Adam’s shampoo, then rinsed, and I used a spray bottle with an approximately 10-1 dilution of this Rinse Aid as recommended. Adam’s says getting this dilution exact isn’t necessary, but it’s a good idea to dilute close to their recommendations.I applied this lightly over the car, rinsed after a short bit and the water absolutely hydroplanes off the car. It was already pretty good because I applied an Adam’s ceramic coating this summer to the vehicle, but this really did seem to boost the protectiveness of the finish a noticeable bit. It was simple to apply and I wiped gently with absorbent microfiber drying towels.I did the car in the shade, and when I moved it into the sunshine it really looked shiny. There were a few spots where I hadn’t gotten it buffed up, and a quick touch up with a fresh microfiber cloth finished it up.I used the Rinse Aid on the wheels, and also lightly on the glass. I think it might have left a slight filmy coating on the glass, but I could only see it slightly in the sunshine at the right angle. It isn’t enough to make me think the windows are not clean.I was very happy with this product. Over time I have actually been choosing Adam’s products for most of my car care needs. Their products, and this one in particular always work well and are not overpriced. Sorry if I sound like a spokesman for them, but I’m a female who is only now learning to do a good job caring for my new car, and I find their products work, are priced well, and they have very good videos showing me how to use them. As a newbie to detailing my own car I really appreciate this company and what they offer. Thanks Adam’s.The Rinse Aid really looks nice. My car looks amazing!
Recommended Products