Your cart is empty.
Your cart is empty.
❂ 304 stainless steel water sampler:
It consists of two parts: the water sampler barrel and the counterweight ring! It is specially used for field water sampling, and is used for collecting water samples within a depth of 0-30m in rivers, lakes and reservoirs.
❂ How to use:
1: Put the prepared rubber hose on the water outlet of the water sampler, and clamp the rubber hose on the upper edge of the water sampler.
2: Buckle the safety buckle on the stainless steel handle and tie it to the safety buckle with a rope.
3: Put the water sampler vertically into the water, the bottom valve will open automatically, and slowly lift the water sampler after it reaches the set depth; the lower valve will close automatically!
4: Read the number;
5: Put down the rubber hose and take samples.
❂ Precautions:
● When using, be sure to clamp the water outlet rubber hose first, and then open the two semicircular upper covers.
● Let the water sampler sink into the water, and the bottom water inlet will open automatically.
● Water samples of different depth layers can be collected, and a rope is tied on it, water enters from the bottom and flows out from the top. When the water sampler stops at different depths, the water sample collected is the water sample of this layer.
● The sinking depth should be marked on the tether. When it sinks to the required depth, the tether is lifted, and the upper cover and the lower water inlet are automatically closed.
● After coming out of the water, do not touch the bottom to prevent the water sample from leaking. Insert the rubber hose of the water outlet into the container, loosen the iron clamp, and the water sample will be injected into the container.
❂ Specification
Material: Thicken 304 stainless steel
Optional specifications: 0.5L , 1L , 2L , 2.5L , 3L , 4L , 5L
$41.46
$ 19 .99 $19.99