Your cart is empty.
Your cart is empty.AISIN’s original equipment technology and know-how is applied to the design and engineering of high quality, reliable, vehicle specific clutch master cylinders. These rugged master cylinders feature precision bore honing under OE quality control standards, anodizing and 'Kanizen' plating of cylinder bodies that strengthens the surface, ensuring smooth operation of the piston as well as superior corrosion resistance. Heat resistant, extended life Ethylene Propylene Rubber (EPDM) seals prevent leakage and ensure long term reliable performance. All AISIN master cylinder's are engineered for quick response to pedal input which allows for smooth, consistent clutch action. Founded in 1965 to produce original equipment automotive parts, AISIN has grown into a $25+ billion global enterprise with approximately 70, 000 employees worldwide. Superior products through engineering excellence, progressive technological development, and dedication to service are some factors which have contributed to bringing AISIN to its position as a multiple-award-winning global leader in automotive parts.
Ocean
Reviewed in the United States on March 5, 2025
Do not buy master cylinders from the parts store. They are complete junk and will fail. They're around the same price as AISIN but are not the same quality. Do yourself a favor and just buy once so you don't have the headache of replacing it every month and trying to get the parts store to honor the so-called warranty.
Frederick3589
Reviewed in the United States on March 15, 2025
04 Tacoma only took 30 minutes to install, works hope it last as long as the original.
Bryce
Reviewed in the United States on February 17, 2025
Fixed my busted master cylinder issue and was able to drive my truck again
Joyce D
Reviewed in the United States on February 14, 2025
Fits well
Michael Richardson
Reviewed in the United States on September 4, 2024
Quality made. Fits well. Bleeds easily
Matthew G.
Reviewed in the United States on June 4, 2024
Easy replacement. Worked as expected on 1996 Toyota Tacoma. Quick shipping.
MC Nizzy
Reviewed in the United States on September 16, 2023
Just like OEM = easy install.
Air cooled addict
Reviewed in Canada on August 23, 2020
OEM for Toyota. The part fit perfectly and performed flawlessly. Very easy to install, I also replaced the space cylinder at the same time. After bleeding the system the clutch worked just like new. I always try to buy OEM parts when possible. 346,000 KM on my 1995 Toyota and it still drives like new.
Thengal
Reviewed in the United States on June 5, 2016
I bought this and the Aisin CRT-014 slave cylinder to replace the original parts on my 1996 Toyota T100. They fit perfectly and they work well. I re-used the old hydraulic line. I just drained the fluid, removed and replaced the parts, refilled with DOT3 brake fluid, and bled the line. When reconnecting the hydraulic line, I made sure the nuts went into the receiving threads nicely, without any excessive force applied. Bleeding the line was also fairly easy, it was a one person job and it took about 5 minutes, without any special tool but a clear hose (i got this at a home improvement store). This is how I did the bleeding: connect a 2 foot long clear hose to the bleed nipple (you might want to wrap some metal hook up wire around the hose near the nipple and pull it snugly toward the nipple; the hose has a tendency to slip out); make sure the hose form a U shape (it goes up an inch or so higher than the body of the slave cylinder before goes down into your fluid collection container. Don't let its other end touch the used fluid in the container). Make sure the master cylinder reservoir is always filled with fresh brake fluid from a brand new, just opened container. As you loosen the bleed nipple, gravity will drain the fluid from the slave cylinder (make sure the pedal is in the up position, the inactive position. A pedal in the down position blocks the fluid from the reservoir getting into the master cylinder). If the fluid does not drain right away, you may have to pump the pedal a few strokes, leaving it in the up position. After 10 or 20 seconds, clear fluid without air bubble appears at the output of the nipple. When this happens, the line has been purged of air. At that point, just tighten the bleed nipple; the pedal should now feel firm and operational. That is all to it! There is no need for a second person pumping the pedal, no need for a special tool like a vaccuum pump.The back pressure of the fluid in the hose section immediately outside of the nipple keeps the air not coming back into the slave cylinder. Years ago, when doing a brake line air bleeding, I needed help from either my wife or kids to do the brake/clutch pedal pumping with a lot of yelling (by me) and whining (by kids); nowadays, it is a one man task.
Recommended Products
$39.77
$ 18 .99 $18.99
$21.62
$ 10 .99 $10.99
$36.69
$ 19 .99 $19.99