Your cart is empty.
Your cart is empty.Product Description
Universal Design
Its unique design, array of drop extensions, and cable management allow the mount to adapt to almost any installation.
Small projectors - use 3 arms instead of 4 provided If mounting points are smaller than universal spider, simply rotate the arm(s) under the universal spider plate.
Large projectors - use 4 arms provided Simply rotate the arms to suit.
Very Large projectors (with mounting points over 12 inches apart) - use the optional extension arms (AMRP10057) to extend the arms from 12 inches up to 15.7 inch reach.
High Quality Engineered
Featuring a reinforced steel plate and cast aluminum mounting head, this lightweight mount can support projectors up to 30 lbs. Its cast aluminum construction provides a strong, lightweight, heat-dissipating platform that is perfectly suited for mounting any A-V projector in a suspended ceiling.
Cable Management
Easy management to ensure that all cables are tucked away for an aesthetic appeal.
Tools and Fitment
No need to buy extra parts in order to mount your projector! All screws, washers, tools are included in order to ensure perfect fitment.
Flexible Alignment
180° pitch & yaw, 360° rotation with lock-down for perfect A-V projector alignment.
Optional Pole Adjust
Choose from any extension tube or combination that's right for you. Available in white, silver, and black color variations:
AMRE5003(B) 3" extension
AMRE5006(B) 6" extension
AMRE5012(B) 12" extension
AMRE5024(B) 24" extension
AMRE5048(B) 48" extension
AMREADJ1626(S)(B) 16-26" adjustable extension pole
Tubes allow internal cable management and can be combined to form lengths. eg. 6 inch +12 inch = 18 inch tube.
AMRP100
AMRP100S
AMRP100B
IS YOUR PROJECTOR TOO BIG?
The standard packaged arms supports mounting points up to 12" apart. An extension arm kit is required for mounting points that range from 12" to 15.7" (sold separately).
AMRP10057 (white), AMRP10057S (silver), AMRP10057B (black)
Boomster
Reviewed in the United States on July 5, 2024
This ceiling projector mount is VERY versatile. I've tested it on 2 projectors with very different shape sizes. For both of them, I had to remove the rubber feet on the 4 corners below. After that, I'm able to screw the arms of the mount on. Depending on the size and shape, the circular design of the mount lets you adjust it to whichever side is needed. The hex bolts used for locking the positions are very strong and high quality. One of my favorite trait from this compared to some others, is that this one only needs 2 screws to be installed to the ceiling. This may not be an issue for others but I live in an apt with cement ceiling... it's always a pain to drill through walls, ceiling, floor... etc. it's exhausting, dusty, and just a waste of time, so I was glad I only had to drill 2 holes and not 4+.A quick attachment of the frame to the ceiling mount, tightening the bolts after getting the perfect angle positions, and done!!PS Unless you're 8 feet tall, please work with a partner if you can, safety first!!
Matilde
Reviewed in the United Kingdom on May 29, 2024
Package arrived on time! Very easy to install good instructions. Fits standard Epson projector and attachment type is very useful for the perfect positioning. It mounted on the wall perfectly and you can lock it into any position or angle necessary.
The Honeybadger
Reviewed in the United States on February 25, 2024
My first order was 1 star because a used product with missing parts was sent to me. As you can see on the photos, works perfect, it comes with different sets of mounting screws for different projectors, it’s light, holds up to 31lbs. My recommendation is to use a lazer level with horizontal and vertical lines to get it “perfect”, if you’re mounting on sheetrock I recommend to use a different type of anchor (I have uploaded a photo) and a helper to mark the holes while you hold it position (if your project lenses aren’t in center).
Shawn L.
Reviewed in the United States on February 1, 2024
This is a very high quality mount for the price. Installation was very easy because of how modular it is. You can install the base plate first, then simply screw on the actual mount base. Separately, you can install the projector mount on the projector and lift the whole thing into place on the hook before tightening the bolts. It was a very pleasant experience to install.The only complaint I had is that you really have to torque down on the bolts once you have it in place to keep it from easily moving. This is a downstairs projector, so I worry that too much vibration from the floor above could adjust the mount. I'll probably order some friction washers to help with this.
Yodainme
Reviewed in the United States on December 12, 2024
I ended up returning this because we needed a lower profile mount so it would be higher up. Had to install it on a vaulted ceiling to get as far back and high as possible for the desired screen size we wanted. This product was easy to install on the projector and very easy to mount to the wall.Product felt sturdy and easily holds the BenQ X3100i. Very nice design as you can take the projector off and put it back on with ease.
DAMAN21
Reviewed in the United States on July 7, 2023
It is heavy duty. I like you can mount the plate first then come back and screw the pole on.I was obsessed with getting it to line up straight while having the pole tight. I didn't realize as long as it was threaded on quite a bit all I needed was to tighten the little set screw when I had the drop pole centered and it held it tight.Lots of adjustments very easy to aim.
Trent
Reviewed in Australia on July 26, 2023
I used this mount on an epson projector.Great mount, will need to really think about how to mount to be able to get the cable through the hole provided, as the timber beam will need to be there to support the mount.
Lunardon Marco
Reviewed in Italy on October 26, 2019
Ottimo prodotto solido e verniciato bene consiglio
DAVID WRAY
Reviewed in the United Kingdom on May 4, 2018
Really solid piece of kit.I like the clear diagram with no instructions, but some may not.It was a little tricky to get the best positioning of the arms, but this was due the the projector only having 3 mounting points all near the front.Once together it is really solid and easy to adjustReally good value
Cliente
Reviewed in Spain on December 11, 2018
Se adapta perfectamente al proyector. Es de buen material, robusto y la fijación es fuerte. Yo lo he colgado en horizontal de la pared, también se puede poner en el techo.
Mike L.
Reviewed in the United States on July 16, 2017
Update on 6/11/18: This thing had a good run for me, but it's time to say goodbye. I upgraded my projector over the weekend and, unfortunately, this mount won't fit the new, larger projector. I also dropped a star on the rating as my attempt to reach out to Amer to see about getting some new support arms/hardware did not go as well as I would have liked. The hardware is solid though, so if you have a small/decent sized projector and need a nice, affordable mount, you can't go wrong with this one.This thing is way better than any product should be for just over 20 bucks! Very sturdy, very easy to mount/install, great adjustable options and once you get it where you want it, you can lock it down tight like a drum and it's not going anywhere. I used this in an L shape (meaning I mounted it the wall and hang the projector down from there. I was very happy to see that I could mount my Optoma HD25e with no problems and it looks top quality all the way! Man, this is the projector mount I have been dreaming about...
Recommended Products
$12.95
$ 5 .99 $5.99