Your cart is empty.
Your cart is empty.Product Description
AmeriLite only work with highest tier manufacturer with over 30 years of experience in automotive lighting. Our factory known for their quality, durability and innovation with CAM/CAM design and testing in house using multimillion dollars equipments ranging from photometrics, temperature & humidity to package drop test. Safety is our factory main goal and all of our products are DOT and SAE compliant with annual inspection that exceed FMVSS No 108 / ISO 9002 / QS 9000 requirement.
Benefits:
- Improve Visibility
- Enhance Safety and Vehicle Appearance
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Roberto Esparza
Reviewed in the United States on March 11, 2025
Love it perfectly on truck
Larry
Reviewed in the United States on March 1, 2025
They fit like a glove! The original rubber air ducts line up perfectly, the bulb holders are great, lens clarity, mounting points are perfect! Swapped out the bulbs for Phillips, but, other than that, used them as they came out of the box. Super happy!
Wesley
Reviewed in the United States on February 24, 2025
This is pretty much standard fare for aftermarket headlight assemblies. They feel flimsy, I don't expect them to last too long, and there are fitment issues. I don't want to pick on these specific assemblies too much because, really, they all suffer from the same issues and are probably made in the same factories. For these ones specifically, though, I did have to modify them slightly to fit my 1999 Dodge Dakota.The thing I had to modify was the socket that one of the bulbs is supposed to lock into on the assembly was not correctly aligned so I had to use side cutters to cut off the little stop tab that is supposed to lock the bulb into the correct position. If I hadn't modified that one socket, the assembly would not have fit together with the bulb installed.But, again, that's a very common occurrence with any aftermarket car parts that you find these days. It's not like OEM where you can usually just install it and go.All in all they look fine and they work, with some modification, and are a lot brighter than the original hazy assemblies they replaced. I wish we could go back to having glass and metal headlight assemblies instead of these flimsy plastic ones that need to be replaced every couple years.
Michael Martin
Reviewed in the United States on February 20, 2025
I have bought other brand aftermarket headlight housings. Like Spec D Very low quality.When I opened my front door the shipping box was huge very well packaged. The quality of the headlight housing was excellent OEM even better . Definitely will use this headlight brand for other vehicles
Ron H.
Reviewed in the United States on December 30, 2024
I tried cleaning the age off of my original headlight housings with the various kits. These replacement fit perfectly. The look and operate perfectly.
getausername037
Reviewed in the United States on September 7, 2023
The old headlight housings in my truck were shot, one of the bulbs exploded and melted the inside of the housing. I got these as a cheap replacement and I love them. I love that they come with the headlight bulbs (not the turn signal nor running light bulbs though, just headlight which is fine), even if they aren’t the greatest beam. These housings feel quite nice and were super easy to put in. I watched 5 seconds of a video to figure out where the bolts were and they went in super easy. Some people had issues with the screws being tight for holding the housings together but mine came out easily and went back in easily. I’m super happy with the clarity of the lenses and they would provide amazing view if you use a better grade halogen bulb. The bulbs that came with them will do the job just fine though. Overall, great quality, great fit, little to no adjustment needed, and good visibility straight out of the box.
DintDobbs
Reviewed in the United States on February 1, 2022
Exactly what it says on the tin. These are a pretty decent replacement for the factory units, at a much lower price. If you want them to fit and function perfectly, pay for the MOPAR brand name.My truck is a beater that doesn't matter if it looks great, and the frame rails and fender mounts have been bent and straightened, so this may not apply to everyone, but there's about a 1/4" gap above the left headlamp and below the right, and I had to remove the little U-joint clips from the backs of both assemblies in order to cram them into the holes. Impossible to know if this is because of inferior design, or prior damage to the truck body (bumper might be crooked). Either way, it's an excellent choice for my application, and the Phillips-head screws for aiming and connecting the turn signals were an appreciated convenience, even though they broke through the clips while aiming and had to be modified in order to work. I'd only recommend these to anybody who needs function over form.Besides the other little oddities on my application, the turn signals have a tan plastic frame, rather than the black frames on the factory units. No difference to me, but some people might find that this breaks the look of the truck. If so, pay more for some thing else.
Bohdi
Reviewed in the United States on June 1, 2021
I actually took 6 days reviewing, calling, and shopping different manufacturers. Doing a in depth research I settled on these head lights. Not only are they made superior to Chrysler's lamps, they are way cooler looking on the Durango. Lens is thicker, fits perfect, installation was 15 mins and simple. Small ratchet/10 mil socket with extension, five point hex for the middle screw in between the upper and lower lens first off.The only issue is you need four standard clear bulbs for the turn signal and lower lens. It states bulbs included, yet that only the halogens. Still highly recommend these especially for those who live in a rural area as I do in the hill country of Texas...Deer every where at night.Very bright, yet not annoying like the European halogens...Bohdi Knows...Peace
Recommended Products
$37.69
$ 17 .99 $17.99