Your cart is empty.
Your cart is empty.Andis 64123 UltraEdge dog clipper blade has a long edge life and is constructed from carbonized steel. These premium components provide the blades with a sharper edge and increase their durability. Using a pet clipper blade with hardened cutting technology, the pet's hair is cut from its tail, feet, face, and ears to a length of 1/8 inch. The blade is 7FC in size. The UltraEdge blades undergo a special hardening process for a longer blade life, extending the period they can be used. Sharp edges have been incorporated into the design of the edges for easy cutting. The clipper blade's useable life is extended by a special hardening procedure and chrome finish. The chrome finish makes it ideal for your dogs because it resists heat and rust. The Oster A% and the majority of detachable clippers are compatible with the clipper blade. It is compatible with the model's AG, AGC, BDC, BG, DBLC, FHC, MBG, and SMC from Andis.
Morgan
Reviewed in the United States on August 21, 2024
I got this blade and normally there is oil in the package to prevent rust. I am not sure if something happened or I bought from a bad vendor. There was no oil and the words on the and number 30 was rusted. I love Andis and have never had this problem in the past
Customer
Reviewed in the United States on June 18, 2024
Has stayed nice and sharp, use it everyday.
Bobbi Meyer
Reviewed in the United States on February 4, 2024
I trimmed two dogs and it seems they dulled sorta quickly. Both dogs were freshly bathed and clean.They did the job, it just wasn't as neat a trim as I'd hoped for.
Adriana
Reviewed in Brazil on January 12, 2024
Ótima qualidade original valeu muito para meu trabalhoQue venha mais promoções para eu aproveitar
MB
Reviewed in the United States on January 11, 2024
Great blade. For those of you who may have a problem attaching this blade to your AGC2 here is how to put the blade on.1. Seat the blade peg into the blade attachment slot.2. Press the blade release button at the back. Hint: keep the button pressed in the whole time.3. Press the blade down - the whole time you are holding the button in, and the blade will seat itself.4. Now stop pressing the button.5. Double check that the blade is seated perfectly. If it is you are ready to start grooming your pet.6. When ready to change out the blade - just press the blade release button again.I have to do the above steps for the following blades: 3 3/4 FC, 3/4 HT, 7FC, 7 FT, 8 1/2, 4 FCHopes this helps anyone who is having difficulty attaching your blades.
Marie
Reviewed in the United States on August 30, 2023
I purchased this blade because the other one I bought my dogs hair was still long. Since she has a black coat I wanted something that would clip her shorter in the summer months. This is a great length, and she could probably still go a little shorter.Pros:Easy to clip onto your Andis ClippersEasy to cleanCuts so well and smoothCons:NoneI love my Andis Clippers, it is so easy to give my dog a haircut when you have a good pair that don't catch on everything little thing, or bother her when my dog moves while getting her hair cut. It makes the process really smooth. And, this blade is an awesome addition to your collection if you want to go shorter in the summer and longer in the winter.
Marko Laitinen
Reviewed in Germany on January 23, 2023
Ich habe diesen Scherkopf gekauft da der Verkäufer gemeint hat, dass er an der Wahl km10 funktioniert. Dem ist leider nicht so. Der Scherkopf springt aus der Halterung und ist somit für mich unbrauchbar. ACHTUNG! Der Verkäufer akzeptiert keine Rückgaben.
Jason
Reviewed in the United States on April 5, 2022
I bought an Andis clipper to do my grooming at home, and for the first few times used a 10 blade with a plastic guide comb to get a bit longer cut. I was very difficult and took forever because it kept getting clogged with hair and would not cut smoothly.I wish I had gotten this blade from the beginning! The cut is smooth and quick and does not clog.If you want a bit longer cut than the 10 blade, definitely buy another blade instead of trying to use the clip on guide combs.
vera castro
Reviewed in Brazil on February 26, 2021
Excelente, pode comprar é original
justdave
Reviewed in the United States on September 6, 2020
Good solid clipper blade and fits my Andis dog clipper perfectly, as it should. Good solid construction good quality. On dog clipper blades a higher number blade cuts shorter and a lower number blade cut longer. So the clippers came with a number 10 blade which is a very short cut, mostly for a shave down, a bit to close to the skin for my dog. So for a longer cut choose a lower number blade. I find 3/8" good for summer cuts, this blade, and I will probably get another blade for winter cuts that's about 3/4" so my pup has a bit more hair for some warmth for colder weather. And to the groomer once in a while to "fix" my mistakes. Dog grooming is harder than it looks! :-)
A Lim
Reviewed in the United States on January 29, 2019
I just started grooming our Shihtzu mix and had bought the Andis AGC Super 2-speed which came with the 10 blade. I then realized I need the 4FC for clipping her body. When I looked up the product description, it didn't say whether it would fit my Andis and one reviewer even said it doesn't but another said it does. So I just wanted it to be known that it does fit the AGC Super 2-speed. The one thing I did notice is this 4FC blade seems to have a yellow tint to the silver making it look older or used but I tried it out and it works well so we'll see if it holds up well after a few grooms. It cuts very well until you hit a matted spot but I presume all blades do that and it does give a nice finish to the fur.
Cornish Wafer
Reviewed in the United Kingdom on May 25, 2017
OMG! originally bought the and is clippers and also purchased plastic combs to put on the blades. It took absolutely hours to clip the dogs, about four hours actually! It was awful. I'd end up with a sore back and the dogs dreaded clipping time. Eventually, I mean over a year later, I decided to try different blades. Well, my husband clipped our black doodle first - she has a retrieverish type coat and the clipping time more than halved! Weeks later I bit the bullet and used it on our apricot doodle and she has a poodle coat. Well! it took me just over an hour! It was as though she felt better about it too as she didn't do all the pulling away when I was doing her legs, bless! So, absolutely fabulous purchase. Extremely pleased! Just wish I'd done it bloomin ages ago!
D G SAUNDERS
Reviewed in the United Kingdom on December 10, 2013
Quite a good blade but not very good for Westie type coat would be ok on straight fur or short fur just trimming.Good quality. I was replacing the wide tooth blade as I thought it may give a smoother cut but it is ok and will be a good addition to the collection.
Recommended Products
