Your cart is empty.
Your cart is empty.Product Description
Front Driver and Passenger Side
Compatible with Ford Models:
- 2000-2005 Excursion Sport Utility
- 1999-2004 F-250 Super Duty Pickup
- 1999-2004 F-350 Super Duty Pickup
- Brake Piston Diameter: 2.118 inch
- Disc Brake Piston Count: 2x Phenolic Piston
- Brake Inlet Port Size: 3/8 x 24
- Bleeder Port Size: M10 x 1.0
- Installation Hardware Included: Yes
- For more details, please check the product images
Michel Bouchard
Reviewed in Canada on November 19, 2024
Très bien
Jessica
Reviewed in Canada on January 27, 2024
On both sides the caliper bracket was making contact with the rotor. Had to disassemble both sides and file down the bracket. Poor quality and won’t be buying a-premium products again.
Greg f.
Reviewed in Canada on January 12, 2024
works like it should no leaks
Kathy
Reviewed in the United States on April 30, 2024
Should have known better than to buy cheaper parts. The caliper bracket was scraping on the rotors so I had to use the old brackets.
A woodworker
Reviewed in the United States on July 1, 2023
They fit like stock. The glide pins fit the bracket but seem undersized relative to stock. None the less the brakes seem to work fine.
brett l.
Reviewed in the United States on June 19, 2023
Bolts on, bleed out fine, working fine. Better price than parts store
Jonathan
Reviewed in Canada on December 10, 2023
These callipers fit great and was impressed with their functions so far. Just make sure your disk brakes are of the right size before ordering. Apparently there’s multiple disk brake sizes, mine were 13.3” and they fit perfectly. Thank you Amazon.
S.V.
Reviewed in the United States on November 22, 2023
Put these on my 2003 Excursion and worked fantastic. Very SATISFIED
matt
Reviewed in Canada on November 22, 2023
Well I bought 4 calipers for my 2001 f250. so far I have installed the front set . They came quickly and have a nice galvanized type finish to them which i definitely appreciate because every previous caliper I have bought for this truck over the years has been bare casting and rusts very quickly.the fit and finish i thought was pretty nice and had no problems installing them on the truck....it wasn't until I put the driver's tire back on that i noticed an issue. out of habit I spin the tire to make sure everything moves freely before I put the truck down off the hoist....I spun the passenger side and it moved freely no problem....i grabbed the driver side tire and tried to spin it as well and could not move it one bit which I found really strange so i pulled the tire back off and upon inspection of the brake assembly i noticed that rotor was up against they inside of the carrier bracket which I thought was strange so i disassembled the brakes and compared the new Carrier to the old one i had just taken off and when i put them side by side i realized they had not machined off enough material when the carrier was made and so when i bolted everything together it would pinch against the rotor...so i ended up sand blasting they old carrier and painted it and put the new pins in it so that i could put my truck back together.as for they other side it was machined to the proper spec and i did not have any issue with that side. But still i did not like having to recycle a portion of my old brakes to make my new ones work...and i have the back brakes to install next when i have time i hope i do not run into any issues with them hopefully quality control will catch any future machining mistakes so that no one else runs into problems like i did. I have attached pictures of it assembled showing where it was binding and an image of the carrier and the spot that needs to be machined more for clearance....I also attached a picture of what it should look like for clearance with they old carrier that I sand blasted and painted grey to reassemble you can see the clearance differences between the 2 photos
Sam
Reviewed in the United States on November 15, 2023
Carriers did not fit due to poor machining, they would not fit over new rotors. had to use the originals lucky they were not worn out. Calipers matched .
Shane
Reviewed in the United States on November 3, 2022
Good quality
Lucas
Reviewed in the United States on October 10, 2020
Works as intended will see how it holds up to salt in winter seems to be real good quality tho
Mark L. Smith
Reviewed in the United States on April 23, 2020
Came with all hardware and fit perfectly. We'll see how long it lasts...
Recommended Products