Your cart is empty.
Your cart is empty.Product Description
Compatible with Chevrolet Models:
- 2015-2017 Equinox L (Sport Utility)
- 2010-2017 Equinox LS (Sport Utility)
- 2010-2017 Equinox LT (Sport Utility)
- 2010-2017 Equinox LTZ (Sport Utility)
Reference Part Number:
- 19170499
Note:
- It fits the model with Fender Flares
Specifications
- Position: Front and Rear(Driver and Passenger Sides)
- Package Type: Box Packaging
- Injection Style: OE Replacement Molded
- Installation: Pre-Drilled (Direct-Fit)
- Color: Black
- Materials: PP+TPE
- Number of One Set: 4
Tony Settles
Reviewed in the United States on February 28, 2025
They fit perfectly no drilling was necessary. A good fit for a 2014 Chevy Equinox LTZ.
Leopoldo Lozoya
Reviewed in the United States on April 3, 2025
Fits perfectly
Blu Maxx
Reviewed in the United States on September 25, 2024
Seems to be durable thick plastic. Installation pending.Sadly, there was no hardware ( screws & clips) included, while clearly present in the description and images on the Amazon product page.
Eduard P.
Reviewed in the United States on September 12, 2024
Ordene estas laderas para mi Chevrolet Equinox 2014 LT y su molde se ajusta perfecto a la silueta de los guarda fangos, pero los agujeros de los tornillos no coinciden, pero eso no fue problema solo basta atornillar así nada más directo con fuerza para ir abriendo otro agujero en otra posición y quedan perfectas, no duden en ordenarlas son de material duro de buena calidad
06CorvetteGuy
Reviewed in the United States on August 9, 2024
Perfect fit on 2023 Equinox. I will point out one thing the front flaps extend about 1.2" above the lower plastic bottom rails, which means it will potentially trap water/salt/snow in that gap on the paint resulting in more corrosion on the paint/metal. I have some clear vinyl wrap for automotive applications I am installing in that space to prevent this. Not a huge deal, these guards look great!
david francoeur
Reviewed in Canada on February 10, 2024
Facile a installer, fit parfaitement sur equinox merci
Tombo
Reviewed in the United States on January 6, 2024
Easy to install, keeps debris of the lower part of the vehicle.
Pauly
Reviewed in Canada on January 31, 2024
Nice sturdy product. Perfect fit. They are mud flaps so a couple inches longer would be better for dirt kicked up. Rear flaps installed in minutes and super easy. Front ones need a special touch and finesse to secure without drilling holes in fender. I had to remove fender liner a bit to get a support installed behind liner. Worked out great but hours invested for front install.
Placeholder
Reviewed in Canada on May 14, 2023
Perfect and new. Fits 100% thx.
Brandon J
Reviewed in the United States on October 22, 2023
These are hands down the best aftermarket option, very affordable, and look great.I have them on 2012 Chevy Equinox LT.The bad is that I can confirm as others have stated: installation is a pain, there are no directions, fitment is poor, and you will need extra tools.For context I am a weekend warrior DIY person. I have installed 2 other sets of aftermarket mudflaps on other vehicles and this set still took me over an hour to install and frequent trips to the toolbox.Included are the mudflaps and hardware for installation (clips and screws). For removing the existing hardware a flathead screwdriver is needed to pop out the factory trim retention clips which can be discarded. On my 2012 LT the rears also had one torx head screw that needed to be removed, so that required more tools.After all existing factory clips were removed the next step is to place the clips the provided screws will be catching on the inside to secure the mudflaps down. These can prove to be quite the challenge. Without a car lift I was frequently laying under the car crawling around attempting to get the correct alignment of the clips. These is where it gets interesting.The clips do not align with the pre-drilled holes. Like at all. Pushing around as hard as I could even with the mudflap in place, fitment is poor. I found myself threading the screws through at quite extreme angles to be able to catch the clips. Nothing fits straight on/ straight shot.One was so far off (see picture) I opted to reach for a drill and punched my own new hole through as after my first 2 screws were in, the third hole was nowhere to be found.All in all, the product looks great. I am happy with the price. For a DIY person and a full toolbox and previous install experience it was an easy hour long project with minor modifications and a few extra attempts at attaching as nothing fit correctly on the first try. Had I approached the project as a first time experience with nothing a screwdriver, that would have made for a very frustrating afternoon.All the best!
Lucie Vallee
Reviewed in Canada on October 22, 2023
Ces bavettes était un cadeaux, quand j'ai offert ces bavettes à mon voisin, il était heureux de recevoir des garde-boue qui va protéger et garder propre son Equinox 2012. Un cadeau utile. Ces bavettes sont de très bonne qualité et une très bon prix. Très satisfaite de mon achat. Merci.
Flower Nut
Reviewed in Canada on February 10, 2022
Cosmetically these look great, however I have some serious reservations about the durability of this product when you live in an area that gets well below zero regularly and has a good deal more than a skiff of snow. Even on a clean, well maintained highway there are always stones which I suspect will shatter these if the temperatures are cold. They were a little difficult to put on (we don't have an auto mechanic's tool box) and we felt you should not have to go out and buy expensive tools for a single use installation. Delivery was on time and the description was accurate although perhaps lacking in pertinent information (temperature, etc.)
Zombie Woof
Reviewed in the United States on June 23, 2019
Just spent a little over an hour installing these, perfect fit!Only downside I would mention is there are no instructions.You will need a Phillips screwdriver, and a T10 or 3/32" Allen wrenches or bits to remove the existing screws.A battery powered drill is advisable as well with a 1/8" drill bit.Back flaps are cake, 3 factory screw on each side, unscrew, place your flap, screw them back in, holes were where they should be.Front flaps take a little bit more work. Turn your tires far left if you are doing the left side, unscrew the factory screw. hold the front flap in place, put the bottom screw back in for alignment purposes and use your drill to make two 1/8" holes in the plastic using the holes in the flap as your guide.. Take the flap back off, use the 2 metal clips provided and work them in so they are centered on the holes. Put it together, move your tires to the far right and repeat for the other side.These are nice and subtle, a nice factory look. Enjoy!
Recommended Products
$119.99
$ 55 .99 $55.99