Your cart is empty.
Your cart is empty.Product Description
Optimised for high static pressure
Because the fan design of the P14 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow - even with increased air resistance. This makes the P14 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.
Maximum quietness, minimum vibration
The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.
Improved service life
The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation.
150 to 1800 rpm controlled via PWM PST
With a wide speed range and innovative PWM Sharing Technology (PST), the P14 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to 4 other PST fans can be connected in series.
High quality sleeve bearing
Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.
0 dB mode - Zero rpm
The speed of the P14 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while ensuring good performance on demand.
General data
Performance
Fan Speed: 150–1800 rpm (0 rpm below 5 % PWM)
Airflow: 52 cfm | 88.35 m³/h
Static Pressure: 1.55 mmH₂O
Noise Level: 0.3 Sone
Operating Ambient Temperature: 0–40 °C
Fan
Fan Frame: Slim
Control Type: PWM PST
Connector: 4-Pin Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing
Electric Characteristics
Typical Voltage: 12 V DC
Starting Voltage: 4 V
Current | Voltage: 0.19 A | 12 V DC
Cable Length: 400 mm + 80 mm
Size & Weight
- Length: 140 mm
- Width: 140 mm
- Height: 16 mm
- Weight: 109 g
Aullto
Reviewed in Australia on March 1, 2025
It's not the best out there, but it gets the job done.
BEM
Reviewed in Germany on February 5, 2025
Super dünner Lüfter ist auch nicht zu laut und ich setze ihn als Radiator Lüfter ein, perfekt.
JohnD
Reviewed in the United States on September 3, 2024
I upgraded my stock power supply to an SFF-L model and needed these slim fans instead of the stock ones. These do a sufficient job at cooling my radiator even though they are not technically design for it. I'm very happy that I was able to fit my larger power supply and these fans were available from Artic.
Blake
Reviewed in the United States on May 20, 2024
I got a liquid freezer ii some time ago and while it’s been great, I can only use it by mount it one way, the front of the case. This was fine and kept the cpu very cool, but it increased gpu temps and limited the length of the gpu. Tried it in different orientations and recently bought a new case (not for this reason but still) and there was no luck, the rad was too thicc so the included fans wouldn’t fit due to it running into the motherboard. Fast forward to today and I was finally able to mount both the fans and the rad on top resulting in lower gpu temps granted with higher cpu temps, probably need to switch some fan speed profiles anyways so not too worried.Overall, really happy with these fans. Came with standard case screws and rad mounting screws which was perfect. I will say, the box it came in was incredibly tight fitting, it actually required me to tug on the cord it was so tight, with no packaging so I could assume the bad reviews of this arriving broken are from that.
Mark
Reviewed in the United States on December 27, 2024
One of the blades broke off and created a humming. So far the replacement is working well.
Cullen
Reviewed in the United States on November 21, 2024
These are a must if you are building SFF. Simple, easy, stealthy and slim. Sound level is also acceptable. I would absolutely buy more if they made a reverse blade variant because the fan is so slim that on the non grate side the blade can rub on the mount location. This is problematic for my build in top exhaust spot.
W. Heller
Reviewed in the United States on November 1, 2024
Arctic on the the Freezer version, uses 27mm fans. I was trying to get a slimmer one due to the power connectors to the MB and the VRM hat sinks, so they don't get pinched or melted, but it didn't work, and I ended up removing 1 out of 3 fans. But I do have a spare.....
Arthur
Reviewed in the Netherlands on October 17, 2024
Good and saved my PC build because the Radiator was too big.I was thinking what screws i need to fit my radiator but then i read online they are included.
Jesús M.
Reviewed in the United States on October 13, 2024
Good-looking fans with an affordable price, low noise with good performance.
MarshyFerret
Reviewed in Canada on January 2, 2024
Literally mm of clearance left. very happy this solution works. im running top and front exaust; rear, panel, and bottom intake. standard fan depth would have left me with only side and bottom intake. glad this worked.
David
Reviewed in the United States on December 25, 2023
Hard to find a good slim 140mm, and this is one of the best I have owned. Good pressure and airflow for a slim fan, but had an odd audible buzz if the PWM sharing is used. I initially tried sharing 3 fans on the same channel, but settled on 3 separate channels and can run full speed with no buzz.
J&V
Reviewed in the United States on December 22, 2023
I use the Arctic Freezer 280 in a nzxt h7, and it didn't fit up top due to the motherboard heatsink and colum in the case. Using these, it fits perfectly with some room to spare, and performance wasn't really all that affected with my oc'd 13700k. Temps maybe changed 1-2c, maybe? But nothing to worry about. They're also very quiet, even running at max speed. Fwiw, I also received the fan blades that are connected at the ends, they feel pretty durable and I haven't experienced any of the issues mentioned in other reviews. I'll update if I do, but in the meantime, I would recommend them if you need to fit a radiator in a tight area.
Teggfd
Reviewed in the United Kingdom on July 11, 2022
These work really well!There is a slight motor noise near the slowest fan speeds(start and stop basically). I do not notice this in actual practice once installed however. Cooling/noise performance is excellent and one of the best in the category.Note re other reviews: I also have the slim Noctua and that can also touch/clip in close spaces so I already use tiny silicone spacers to prevent that. This fan didn’t seem any different in that respect but of course be careful when using any slim fan.
Recommended Products