Your cart is empty.
Your cart is empty.ATP Transmission filters are designed to keep the transmission fluid clean and flowing consistently, as intended by the original manufacturer. This is achieved by matching the OE specification of particle filtration and fluid flow. Every transmission will eventually accumulate debris from normal wear and tear. It is critical that the transmission fluid is kept clean so that the valve body and other vital components do not become clogged making them in-operable. By regularly replacing your transmission filter, you will be extending your transmission's life and avoiding the possibility of costly repairs.
Patrick
Reviewed in the United States on May 11, 2024
worked great and is a good fit. However have in mind the screw at the tip of the curve towards the middle of the car is the most tricky to tighten as it has the most tendency to leak. work little by little criss cross and it would be fine. avoid tightening in row. but its a great product.works fantastic. well worth the price.
Sony Sandjaya
Reviewed in the United States on May 1, 2024
The media could not be loaded.
Rama
Reviewed in the United States on January 2, 2024
I had a leak after changing the gasket. I won't recommend this gasket for installation.
Kat Phiche
Reviewed in the United States on February 22, 2023
The gasket I received with the ATP B-426 transmission filter kit looks like it's made of cork, not the material shown on Amazon or the manufacturer's website.The gasket doesn't have tabs at 3rd hand bolt locations, but the there are several gasket holes that look smaller and would hold the gasket and several transmission pan bolts in place when reinstalling the transmission oil pan.The existing OEM gasket was in good shape and was still firmly attached to the transmission pan, so I reused it instead of the gasket that came with the ATP B-426 transmission filter kit. There were not any leaks after reusing the original gasket.AMSOIL has great Youtube showing how to do a transmission flush and filter change on a 2012 Camry. It helped me a great deal.Also, amazonconfirmedfit says the ATP B-426, won't fit my 2012 Camry, but the ATP website says this is the correct kit and the Youtube AMSOIL video also said it is the correct kit. The gasket aligned with my transmission fluid pan, the bolt holes matched and I used the filter to replace the old filter. The kit worked just fine on my 2012 Camry.I didn’t grind down a 10 mm socket as shown in the AMSOIL video to remove the one bolt partially behind the car frame. I used a 10 mm socket with a 1/4-inch drive. This 10 mm socket was slightly shorter and I was able to place it on the difficult bolt and insert the 1/4-inch extension far enough into the socket to loosen and tighten the bolt.Prior to flushing the transmission fluid and changing the transmission filter, my Camry had a slight shudder at 30, 40 and 45 mph when it shifted gears.Firestone said it wasn’t the tires I had just purchased causing the shudder at different speeds, as the tire balance and alignment were OK, but that I should try changing the transmission fluid.Flushing the fluid and changing the filter eliminated the shudder when shifting gears, although I wonder if it was just low on transmission fluid.Bottom line, the 2012 Camry with 135,000 miles on it runs great now.
Joe Ricketts
Reviewed in the United States on December 1, 2023
The product fit and did not leak. Good brand.
Daniel Drumm
Reviewed in the United States on August 29, 2021
OEM fitment and quality. The gasket lines up perfectly.
JDL
Reviewed in the United States on April 25, 2021
Used on my Toy Camry for servicing tranny. perfect fit and no leaks
Spencer S.
Reviewed in the United States on June 24, 2019
Perfect fit in 2014 Rav4 XLE AWD. No problems. Quality filter and gasket!
Recommended Products
