Your cart is empty.
Your cart is empty.Product Description
Package Included:
Screw X 2
Base plate X 1
Metal screw X 2
Thread stand X 1
Thread spool shaft X 1
Bobbin winder machine X 1
Product Usage Guide X 1
Bobbin Winder
Easy to operate
Convenient for sewing work
Auto stop when bobbin thread is full
Fits for most of bobbins including Type M, Type L,
Type 15 (Universal) or any bobbin with 1/4 inch (0.64 cm) center hole
short thread spooland 2 black sensors
Put your empty bobbin in short thread spool; most of the bobbins will fit the Default position. If your bobbin doesn't fit or the bobbin winder suddenly stopped during use, please try adjust the position of the sensors. The adjust step as follow: turn the screw on the sensor plate to adjust, the edge of the bobbin should be in line with the middle point of the sensors.
Tension disks
There is a tension knob on the tension disks, If bobbins are winding unevenly or you want to adjust the thread tension, The adjust step as follow: turn the tension knob right or left to adjust the thread tension.
Thread cutter, "START" and "STOP" button
After installation, start winding by simply press the "START" button, press the "STOP" button to stop winding; press the start button again to continue the winding process. the automatic bobbin winder will stop on its own once the thread is full, then you need pull out bobbin and cut the thread by using the thread cutter on the machine.
Step 1:
First step, nstall and tighten two fixing screws between the bobbin winder and the base plate with the help of a screw driver, and also make sure you don't install the bobbin winder backwards.
Step 2:
Second step, install the thread stand and the spool stud onto the two holes of the base plate, then tighten nuts on them downwards; make sure the shorter spool studs is horizontal with the tension disc and the taller thread stand is inline with the "start" and "stop" buttons .
Step 3:
Third step, put your thread cone on the spool stud and the thread first through thread guide rod, down and into small hole on the side of tension disks. Guide thread clockwise between tension disks and wrap clockwise twice before inserting thread end into hole in bobbin.
Step 4:
Fourth step, put your empty bobbin in short spool, clockwise wind the thread around 3 - 4 circle along the bobbin to fix. Install finish, start winding by simply press the "START" button, press the "STOP" button to stop winding; the automatic bobbin winder will stop on its own once the thread is full; then pull out your bobbin and cut the thread by using the thread cutter on the machine.
G. Meloy
Reviewed in the United Kingdom on January 7, 2025
This took almost 3 weeks to arrive and had no protective packaging so was broken and a part was missing. It had come from USA and made in China so did a lot of travelling!Returned and refunded but very disappointing
Kindle Customer
Reviewed in the United States on January 4, 2025
Assembly is easy but other reviewers are right - the directions are fairly useless. I still haven't figured out why I have four screws for which there appears to be no use, and no instructions for use. I'm not very mechanical, but assembly was pretty obvious to me. I thought the operation was pretty intuitive, as well.Reduced by one star because the product photos and description are somewhat misleading. The base plate does not extend as far as the picture shows, and there isn't room for a 5500M Glide thread spool. A 2000 yard spool does fit. I put the Glide spool next to the spool holder and threaded it in the stand, and it worked fine. I don't recommend using the built-in spool holder with stack-wound thread, either. I intend to use my Superior Threads thread stand if I wind spools (and I will).Otherwise, works like a charm and is really fast. I like that the tension can be adjusted, which was a problem with my sewing machine bobbin winder - with smooth thread like trilobar polyester, I had to hold the thread to get enough tension for it to wind.I do a lot of sewing and have bought a lot of prewound bobbins. Now, I can make my own!
Dee
Reviewed in the United States on September 16, 2024
its fast and easy and i videoon youtub how to do it its great happy i bought it
AnnetteB
Reviewed in the United States on June 18, 2024
The media could not be loaded.
AES
Reviewed in Canada on May 23, 2024
This bobbin winder works great for my metal bobbins….221/301 bobbins, but my plastic bobbins will not fit the winder. They are smaller and won’t go all the way to the bottom of the winder spool. I purchased this bobbin winder especially for my Singer vintage machines, 221 featherweight and 301, so works well for those bobbins. Winds very fast and stops when bobbin is full. You can adjust it to fill the bobbin more or less which is great.
MrMosmo
Reviewed in the United States on May 1, 2024
The media could not be loaded.
Customer
Reviewed in Canada on March 17, 2024
Fast and accurate tension. Using it for M class bobbins.
Customer
Reviewed in Canada on November 9, 2024
I bought this to wind Class M bobbins as my quilting machine would not wind my bobbins. First try and I had a perfectly wound bobbin. I would recommend this machine.
Lynn
Reviewed in Canada on November 28, 2024
It's nice to be able to fill up a school without taking the thread out of my machine
Marlue
Reviewed in the United States on September 30, 2023
The first one I received didn't work. Left a bad review because the link to tech support also didn't work. Received the replacement today, and also received a very courteous email from the seller, following up on the product. The new bobbin winder I received today works great! I use it for M class bobbins, and it winds a bobbin evenly, in about three seconds flat!! Thanks to the seller for their prompt attention to my issue!
A. C.
Reviewed in the United States on May 15, 2023
I bought a cheaper one and returned it. This one is sturdier, mostly all metal and it works just fine with my Pfaff machine, some that are so old their bobbin winders don't work any more (and so old that parts to fix them are no longer available).It was pretty easy to put together, but the instructions were sort of worthless, it might have helped if the pictures had been larger and not so fuzzy.This one was for my home sewing studio, but we also bought one for the costume shop at the theatre where I work and there, besides several older Pfaff machines, we also have others, including an industrial and it works fine on all of them.
Drive 'm Crazy
Reviewed in the United States on December 8, 2023
This is the second bobbin winder I have tried. Don't waste your money on it. The first bobbin I tried to wind, kept slipping on the spindle and the machine made an awful screeching noise and kept stopping. The next bobbin worked fine. The next bobbin jumped up from the spindle a little so the thread wound up on the spindle instead of the bobbin. The last bobbin I tried, the bobbin jumped completely off the spindle and went flying to the other side of the room. I think if there were some kind of spring of something on the spindle to hold the bobbins, this machine would work.
Peggy Gilbert
Reviewed in the United States on March 14, 2021
I just received my Bobbin Winder today and I have put it together, it was easy to assemble, however the directions leave a lot to be desired. However there is a video online at Amazon to help if you have issues. Make sure you put the plate on right side up, I screwed up the 1st time and viewed the video and realized what I had done. I use 15J Singer bobbins, and it works great, and I have no complaints. I hate unthreading my machine to fill a bobbin when I fail to fill enough for the job. I have some larger spools that will not fit, but I have a thread stand I purchased at Amazon some time ago if I need to refill bobbins from a larger spool. Works great, very fast at winding the bobbin and stops itself. Very pleased and worth the money to me.
Recommended Products