Your cart is empty.
Your cart is empty.Automatic Wall Mounted Can Crusher Soda Beer Smasher, Eco-Friendly Recycling Tool for Aluminum Cans (Push Button Valve)
Charles Dooley
Reviewed in the United States on January 12, 2025
Works pretty good. You will get jams fairly often but less if you are patient and hold button down until you see can coming out of discharge. Latest jam wedged can between steel housing and plastic base of feeder, cracking it. i glued with JB Weld. Need to reinforce with steel or it will break again. May put a steel angle in place to reinforce feeder bottom. the Feeder should be made of steel instead of plastic and carbon fiber rods.Big nuts at cylinders and small nuts at small cylinder rods loosened up immediately. So I used loctite medium to lock nuts on cylinders and cylinder rods to prevent loosening. Also on the feeder having carbon fiber rods, they easily came apart so I disassembled and glued together with original JB Weld. Holds together well now.Lastly some have said you need a 20 gal compressed air tank. That is not true as I'm using a Porter Cable 6 gallon compressor that charges to 150 psi. I set the output to 100 psi out and it easily works through the 8 to 9 cans you can load. By the time you load the next 8 or 9 cans in the hopper, the compressor is fully recharged. Can actually charge the 6 gal Porter Cable up to 150 psi, set output about 92 psi, turn the compressor off, and crush 24 cans or so on the air compressor charge of 150 psi. Then turn the compressor on and charge it for the next batch.
Albert Wille
Reviewed in the United States on April 29, 2024
I love the product. It's easy to use. It takes a little skill to assemble it. The only problem is, I have a broken push plate and I don't know how to get in touch with the company to get a replacement part.
Ernst B.
Reviewed in the United States on May 22, 2023
So, I got around to doing something with thirty some large trash bags of cans.I spent over four hours filling two 55-gallon barrels with crushed cans.So if this unit was going to fail it would have been during this workload.Worked just fine.I assume some air oil is needed after all that work but I'll look into that.Suggestions: Once the small air pistons are assembled and all is just fine when you test; apply some easy to remove thread lock on the threads. Those plastic nuts come loose. So a little dab of thread locker. Also on th suggestion; If you are happy with the can-cage after everything is in the right hols all at the same time, you might dab one of the plastic rods with a tiny bit of super-glue. One on each side maybe both top and bottom. Putting the can cage together is an experience but dealing with it coming apart while using it is worse.So put it all together and then dab a bit once it's all good.Lastly : SAFETY Can you hurt yourself clearing out a can-jam ? YES YOU CAN!so unplug the air to save fingers and yes cans do jump out at ya once in a strange while.So it's really cool, hard working and did I mention really cool?
Lyn
Reviewed in the United States on November 17, 2023
My husband bought me this because we collect cans for neighborhood events!! We were collecting cans faster than i could crush them, and this thing has helped immensely!! It will zip through regular sized cans super quick! The larger truly of white claw cans must be hand fed one at a time, but it is still a huge time saver and crushes them really well which is great for storoage! works great!
Carl Johnson
Reviewed in the United States on October 12, 2023
I’ve always wanted to make one of these, but this was a cheaper solution.The only problem is I have to save uncrushed cans for the grandkids to crush.
Hannah Brooker
Reviewed in the United States on August 13, 2022
My husband and I got this to crush the hundreds of cans of sparking water we drink. But our 3 lb air compressor is not big enough to crush more than like 3-5 cans before it has to refill. We’ll be buying a bigger compressor next which was not an expense we anticipated. But overall the product is great. It was easy to assemble and my husband enjoyed that part. We’ve had no issues with the overall functionality.
David Mill
Reviewed in the United States on August 10, 2022
It works great. I would buy another one. My son and I use it all the time. The only thing I would suggest is that you glue the cage together. Everyone small, it pops off and it's kind of difficult to get back together. Otherwise a great tool for crushing cans.
In Hawaii
Reviewed in the United States on March 30, 2022
The media could not be loaded.
Recommended Products
