-
Why you need to let the chiller stand for 24 hours after receiving it ?
Moving refrigeration units can push lube oil and refrigerant into the compressor, wrecking it. Without post-shipment rest, failure rates hit 12-15%. Letting it sit cuts failures to 0.3-0.7% as fluids settle. Easy fix saves big!
-
Why you should reduce water volume in the summer ?
When the indoor temp goes up, the cooling system becomes 20% less efficient. So for summer use, we recommend no more than 105gal!
-
Why you should buy extra filter and 1500L pump for ice bath use?
Filter reduces wear on chiller system by trap impurities like skin particles, dirt, and organic debris, while the 1500L pump maintains a strong, consistent water flow. Have a better ice bath experience!
-
How to test the chiller ?
After 24 hours, install the output and input attachment pieces, use two hose clamps. Put the pump in the tub or a good size barrel, power up the unit and check for leaks. Let it run and make sure it running properly.
-
How to cleaning the chiller ?
2 TO 3 MONTHS. 2 parts 100% distilled vinegar to 3 parts water bath is safe and effective at removing calcium deposits/salt creep/other hard minerals that build up in the chiller over time.
