Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Alex Del Valle
Reviewed in Canada on February 2, 2024
Works well
David R. Stluka
Reviewed in the United States on October 28, 2024
Direct fit for my 2013 Cube. Easy installation and adjustment.
Vlad
Reviewed in Canada on January 5, 2024
Works well no problem installing it
Customer
Reviewed in Mexico on March 12, 2023
Precisamente lo que necesitaba
Jonathan H.
Reviewed in Mexico on January 16, 2021
Tenía problemas con el switch original, el carro no encendía hasta después de muchos intentos, tarde un minuto en cambiarlo y listo, funcionó para un versa advance 2015
IT Guy
Reviewed in the United States on September 16, 2019
This worked on my 2009 Nissan Sentra. I thought it was the transmission going out, but it turns out that if this part guess out, it puts the car into "limp mode" which is apparent when trying to accelerate from a stop (really slow acceleration, but fine once it gets going. Also, my brake lights were not working, which is another tell that this part needs to be replaced.Also, installation was a 1-2 minute, no tools required activity. Just unplug, twist, and pull out the old one and plug in, put in, and twist the new one. Just make sure your brake lights are lighting up when they are supposed to, since the depth of installation is important to nail down.
FLH2006
Reviewed in Canada on July 31, 2018
Installed in a Nissan Altima 2008 S. Brake lights not coming on was the clincher. Took more time to watch the videos on how to change it than it did to install this part. About 3 minutes of my time. Old switch felt mushy when depressing it. Now, my daughters Nissan starts first shot every time. This part feels to be a quality part. Same numbers on both parts old and new. Would buy again.
Chris
Reviewed in the United States on September 13, 2017
Bought this to replace the original switch in my 2007 Nissan Altima.The Altima became a real pain to start. It would take several button pushes before it would start the engine. It got progressively worse to the point where I would need to kick the crap out of the brake in frustration before it would start. Was pretty embarrassing picking up my daughter from softball practice and having to kick the brake like a weirdo several times before it started.Replacing this Stop Light Switch solved the problem. I wish I had known earlier it was this easy and cheap to fix. The switch is located directly above the brake pedal and you can get to it without having to take out anything. Above the brake pedal there are two switches and this one is the closer to the driver side. Turn the switch counter clockwise to disengage it from the mount it is in. The wire harness it is connected to comes off the switch by pressing the tab down and pulling off. Plug in the new switch, pop it into the mount and push in while turning clockwise to install. That's it.Feels so good to have the car start by barely pressing down on the brake. Best $20 I've spent in a while.
Matt G.
Reviewed in the United States on September 3, 2015
Worked great! My 2010 Nissan Altima with push button start stopped starting properly. Sometimes I would have to pump the brakes and keep trying to start it for 5-10 minutes. My ABS, VDC off, and slip warning lights also came on after switching into gear / driving for 30 seconds.The dash kept saying I needed to push the brake to start, even when it was depressed. It turns out there is a defect in the brake switch on several years of Altimas (and several Nissan models). I don't know if models with defective switches all have push button start or not.Regardless the defective brake switch (brake stop lamp switch) causes this problem. The stock Nissan part is ~$50, this generic is $20.The problem evidently originates with a defective wire harness that costs $250-300. To totally (and perfectly) repair this issue the dealer charges you about $600. OR you could just buy a replacement brake switch and replace it whenever it fails, which appears to be after more than 5 years or more than 50K miles. I obviously opted for this because buying $20 parts every half decade makes a lot more sense than paying $600 to the dealer to repair a defective part that should have been recalled.Install takes about 1-2 minutes. On my Altima the brake switch was the switch on the left just behind the brake pedal; the cruise control switch looks similar and is on the right. Note the rough distance from the mount / position of the current switch. Rotate the left switch 45 degrees and it will come free. Disconnect the wire connect on top; don't forget to press the retention clip while removing it. Put the new brake switch in at the same distance from the brake pedal. Rotate it 45 degrees and reconnect the wire connector. I tested my car several times to verify starting, then slowly drove around to verify brake function.Started on the first try, all the dash warning lights went out. A perfect cheap fix!
Taz
Reviewed in the United States on September 3, 2014
This part fixed my starting issue on my 2009 Nissan Altima. The old sensor only worked sporadically, which caused issues with starting the car (because my car didnt think the brake was depressed), and caused issues due to the fact that people behind me wouldn't see my brake lights while slowing!! If you are having trouble starting your car, check to see if the brake lights come on, this is a tell tale sign, which this is a super easy and cheep fix.Very easy to replace the old sensor. The unit is connected to the brake pedal mount. A quarter turn loosens the sensor. Two plastic tabs keep the part connected to the female connector. Pop the sensor off of the tabs, place the new sensor to the female connector and a quarter turn places the whole unit back in place. Very simple. Just be sure to check the sensitivity of your brake lights after replacing the part. If it is in too far, your brake lights will not come on when tapping the brakes; out too far will cause the brake lights to be on when the brake is not pressed.Good luck
Recommended Products
$42.99
$ 19 .99 $19.99
$38.84
$ 18 .99 $18.99