Your cart is empty.
Your cart is empty.AquaChoice FlexSealer is a highly elastic one-component waterborne wood floor sealer specially formulated to reduce sidebonding and panelization. AquaChoice FlexSealer is especially effective in coating wood installed over in-floor heating, floors with various types of floor movement and resisting high thermocycle expansion/contraction effects. AquaChoice FlexSealer is recommended for upend strip flooring, wood paving, floating and plank floors. AquaChoice FlexSealer can be applied by roller, brush or Tbar applicator. Use clean tools. Apply in one uniform coat with care being taken to apply in the direction of the wood grain. With rich coats, allow for penetration into joints and cracks. Avoid irregular application of the sealer. AquaChoice FlexSealer may be carefully buffed with a maroon pad and sandpaper strips but do not screen. Do not apply AquaChoice FlexSealer at temperatures below 55° F. Use water for tool clean-up immediately after finishing. A sufficient dry can be obtained within 1-2 hours with a constant temperature of 70° F and 50% relative air humidity. Prior to the next coat, the surface must be uniformly dry. Insufficient ventilation, lower temperatures, increased coat thickness and erratic air humidity may prolong sufficient drying
