Your cart is empty.
Your cart is empty. SPEC:
Add an extra flexible Type-C USB 3.1 Gen2 IO to your DM and Tower
Transfer speed up to 10Gbps
Interchangeable with other modules
Support up to 15w out (5V, 3A)
Support up to DisplayPort 1.4
HP EliteDesk 800 G4 TWR,
HP EliteDesk 800 G4 SFF,
HP EliteDesk 800 G4 DM(not 35w),
HP EliteDesk 705 G4 DM,
HP EliteDesk 705 G4 MT,
HP EliteDesk 705 G4 SFF,
HP ProDesk 600 G4 MT,
HP ProDesk 600 G4 SFF,
HP ProDesk 600 G4 DM,
HP ProDesk 400 G5 MT,
HP ProDesk 400 G4 DM,
HP ProDesk 400 G5 SFF .
Tonya Hawkins
Reviewed in the United States on February 8, 2025
Works perfectly.
Jeffrey W. Baker
Reviewed in the United States on February 6, 2025
Genuine article works perfectly in a Prodesk 600 G4 Mini. They are not shown in the photo but the package includes the necessary screws, which I was worried about not having. The is so much better than having to goof around with DP and USB cables. Now I have a 1-cable solution for display, keyboard, and mouse.
Cristian Barraza
Reviewed in the United States on February 4, 2025
Work with just one USB-C cable for my portable monitor. (HP Prodesk 600 G4 Desktop Mini PC)
moon butt74
Reviewed in the United States on January 19, 2025
Compatible with Elitedesk 705 g4 dm, video out, no charging/pd, meaningful anyway.
Customer
Reviewed in the United States on April 6, 2025
It is great and useful and works with elitedesk 800 g5 well. I have usb c display port on it with no problem.
Michael L.
Reviewed in Canada on September 8, 2024
Item was new or like new, well packaged in ESD bag. Came with screws to secure it to the motherboard. Worked great on the HP ProDesk G4 600 SFF computer. I was able to use a USB C monitor with the desktop now, as video would not pass through the front built in port. After replacing the VGA module with this, it worked no problem. You may have to check the bios settings, so don’t despair right away if it doesn’t work right away. Also make sure it is seated properly and that it is secured properly. I had no issues with either and it worked first time.
JGLLO
Reviewed in the United States on May 13, 2024
Was hoping that his would work on HP Prodesk 400 G5 Mini. it does not. It fits but computer would not boot up with it installed. Delivery was fast. Product looked new.
Peter
Reviewed in Canada on March 20, 2024
I replaced the VGA Flex IO Card with this USB C Flex IO Card and it works like a plug-and-play device on my HP ProDesk 400 G5 SFF. There is no need for drivers or any other configuration. I did have the latest BIOS firmware installed to avoid any potential incompatibility issues. The Amazon listing does not state that it is compatible with this computer model, but it is.
David White
Reviewed in the United States on October 8, 2024
Got mine used for $12 on EBay. Was genuine HP. Popping out the 3rd Display Port on my wife's Elitedesk 800 G5 mini and replacing it with this USB-C took all of 15 minutes including testing. Required only a small Phillips head driver and small, plastic pry bar. Great design and great product/seller. In my case, I did NOT have to make any BIOS changes - although I looked first before and after install and did not find anything except that the rear USB-C port was immediately recognized and listed in the USB port section.
Peter Hutnick
Reviewed in the United States on June 12, 2023
Works great. But only AFTER going into the system setup and unchecking "USB Type-C Controller Firmware Update" under Advanced -> Port Options in the F10 menu. This option is enabled by default.If not, it will try to update the firmware on every boot. In my case I got no display after that completed.You might also want to save that to your custom default settings. Especially if you're going to use this for your primary display. (Which works great!)
Recommended Products
