Your cart is empty.
Your cart is empty.Product Description
Ergonomic Non-slip TPR Handle
Covered with rubber, offers a comfortable grip and anti-slip, help to set up and secure quickly.
Wear Resistant Metal Joint
Electroplating rust-proof steel arbor with rotary jaw can be adjusted to align and hold work pieces precisely.
Aluminum Die-Casting Material
Abrasion-resistant, heavy-duty, and long-lasting use.
Swing Jaw Design
Can be rotated in two-way, which allows two different thicknesses of rods or blocks to be joined at an angle of 90 degree.
PRECAUTIONS
Before using the corner clamp, please check the thickness of the rods or blocks you want to fix, and ensure they are not thicker than 70mm. Additionally, if the glass is too thin, the corner clamp may break it. We recommend placing some tissues, towels, or a leather pad between the glass and clamp to prevent any cracking or scratches.
The corner clamp is a temporary device used to fix the workpiece, and you should remove it once the work is done. Keep it out of reach from children.
Joe
Reviewed in the United States on March 3, 2025
Not at all what I was expecting. These are truly a set of fantastic clamps. Large, heavy and can clamp multiple thickness at once. They swivel a bit to change the clamping aspect which was a great suprise. I will order from these folks again. Without a doubt.
Bern Kuelker
Reviewed in the United States on February 4, 2025
The clamp came apart during the second use - the inner clamp fell off the drive pin. The threads of the hole for the screw holding the drive pin to the inner clamp are stripped. It appears the threads were stripped either because the screw was put in improperly, the screw itself was damaged or of poor quality, and/or the metal of the bracket with the hole is of poor quality. Unfortunately, I learned this 4 days after the return window closed.
GY
Reviewed in the United States on November 1, 2024
Worked great for holding cabinet pieces together while assembling them.
Michael S. Duffield
Reviewed in the United States on December 14, 2021
I had old VAG coil connectors that were brittle and falling part after a spark plug replacement. Got this tool kit and new connectors....30 minutes later, done! Had zero issues with the quality of this product.
ShawnTrimbleNJ
Reviewed in the United States on July 16, 2020
For the cost of the set, I expected this kit to be a bit flimsy and poorly built. First day they arrived, brought them to work and had to re-pin a new connector to a Battery Monitor Control Module in a 2019 Jetta (am a VW tech). They felt great at the handle and the build quality was actually very sturdy. I don’t re-pin connectors often, but they feel like they’re going to hold up for quite a long time! Glad I got this kit, instead of just getting a VW specific kit for like 10x the cost.
Damien Torrence
Reviewed in the United States on July 24, 2019
This is probably one of the most complete sets you can buy it has one millimeter increments and they work great in my 12 ton press. I have pressed out bushing races, bearings. I highly recommend this set. The case seems a little cheap but this is a bargain tool, not a professional tool, as long as you don't mistreat the case and store it in your toolbox when you're not using it, it will last you.
Donald M.
Reviewed in the United States on March 22, 2018
Arrived with one disk mislabeled as the wrong size. I gauged the disks with a micrometer and on average the disks between .25 mm to .40 mm smaller than their labeled size. There is also a 1 mm bevel on the edge of each disk meaning that the flat flat spot on each disk is 2.25 to 2.40 mm smaller than the rated size. For most applications involving larger bearings this wont be an issue but for the smaller sized bearings requiring a deep recess this could potentially be an issue. However, the very slight under sizing and bevel should prevent seizing in certain situations or aid in centering in tight applications. I don't consider any of these things drawbacks but I do believe buyers should be aware of it.The case molding and latches are acceptable. The hex key recess was poorly molded and the key will not fit but everything else is sufficiently retained to prevent any scattering of the disks.This set coupled with a set of thrust bearings, all thread rod, and a couple of nuts makes draw pressing bearings quick, easy, and accurate.Over all the set is made of good quality steel and will get 99% of jobs done just fine. Can't beat the price and is perfect for everyone that isn't a professional mechanic.
Bay Area Tech
Reviewed in the United States on November 28, 2018
Kit has a great selection of release tools in it, but some of the tines were bent or had uneven chamfers on the tips. If I can't find a better kit within my budget, I will try to modify the tools so that they are useable. I would rather use my time working, so that's a reduction on my rating. If I kept it it would likely work 75% of the time, but being a technician I need something I can rely on. For anyone serious or in the industry, I would look for something higher up in the market.
Recommended Products
$28.87
$ 13 .99 $13.99