Shopping Cart

Your cart is empty.

Your cart is empty.

BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo,Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn(180°)

Free shipping on orders over $29.99

$45.99

$ 19 .99 $19.99

In Stock

1.Size:180°/45kg


About this item

  • 【Metal Gear Coreless Servo】Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight.
  • 【Waterproof Servo】Waterproof performance: IP67 (Please watch the waterproof test video). Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control.
  • 【Widely Use Digital Servo】The steering servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models.
  • 【High Speed Servo Standard Size】1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm); Weight:2.7oz (79g)



Product Description

BETU 45Kg Coreless Servo Motor    -Full Waterproof Servo

Mechanical Specification

  • Dimensions: 40×20×40mm
  • Weight: 75g
  • Diver type: Mos Drive
  • Motor Type: Coreless Motor
  • Potentiometer Type: Direct Drive
  • Amplifier Type: Digital Control
  • Gear Material: Metal Gear
  • Case Material: Aluminum Case
  • Ball Bearing: 2BB
  • Connector Wire Length: 300MM JM Plug
  • Connector Wire Gauge: 22AWG

4 reasons for you to choose BETU 45Kg Coreless Servo Motor

Full Waterproof Servo

Full Waterproof Servo

Waterproof performance: IP67. Good waterproof performance. Better user experience

Stainless Steel Gear

Stainless Steel Gear Servo

Equipped with strong copper & Stainless Steel Gears, Less Noise, light weight.

Very strong, excellent range of motion, and includes a 25T metal horn

CNC aluminium Shell

CNC aluminium Shell

CNC aluminium Shell

Stronger and longer service life

45Kg Coreless Servo Motor

45Kg Coreless Servo Motor HV 8.4V

Super Large Torque, 0.12sec/60°,35kg-cm/6.0V. 0.09sec/60°,30kg-cm/6.0V,0.11sec/60°,45kg-cm/8.4V. 0.07sec/60°,35kg-cm/8.4V.

waterproof servo high torque

Electrical Specification

Operat voltage: 6V~8.4V

  • Control mode: PWM
  • Control frequency: 50Hz
  • Standing Torque: 0.12sec/60°,35kg-cm/6.0V. 0.09sec/60°,30kg-cm/6.0V

0.11sec/60°,45kg-cm/8.4V. 0.07sec/60°,35kg-cm/8.4V

  • Idle Current: 350mA/6.0V, 300mA/6.0V, 410mA/8.4V, 350mA/8.4V
  • Running Current: 3500mA/6.0V, 3000mA/6.0V, 4000mA/8.4V, 3800mA/8.4V
Stainless Steel Gear

Control Specification

  • Dead band width: 1μsec
  • Control System: PWM Control (1500μsec in the central point)
  • Operation Voltage Range: 6.0~8.4V
  • Operation Temperature Range: -20℃~60℃
  • Circle: >60000 times without load
  • Operation Travel: 60°±1
  • Limit angle: 180°±1
  • Direction: Re-clock wise/Pulse Travel 500~2500μsec

Package Included:

1 x 45kg Coreless Servo

1 x 25T Adjustable metal servo arm

1 x 25T Round Type Servo Horn

One set of accessories


janine
Reviewed in the United States on March 12, 2024
I used this product for my trx 4 and it works flawlessly. Overall it is a very strong servo, and when the car is turned on you cannot move the tires at all which is very good.
Shelley Ray
Reviewed in the United States on February 26, 2024
I bought this servo for my 9 year old In 2021, while it's not the most powerful servo it has been extremely reliable. Still works as good today (2024) as it did 3 years ago. I'm not one for writing reviews but while my son was driving his scx10 around in the back yard it made me want to go back and see when we purchased it. If this servo is as much as you can swing then by all means its worth it. I do have several comp rigs and top brand servos (NSDRC, reefs, shiftrc, etc) so I've been around a few of the better quality ones. My son comps with it and it's held up extremely well.Update 6/10/24 servo finally died. Absolutely got my money's worth. 9/08/21 - 6/10/24 time to order the 70kg betu version and see if that holds up like the 45kg did.
Chris 62
Reviewed in Germany on February 10, 2024
Das daß Gehäuse voll aus Aluminium besteht,👍 kann ich nur weiterempfehlen.
M_a_t_t
Reviewed in the United States on January 24, 2024
I bought this and another 45kg and this one is more sturdy, smooth, more quiet. It is a bit taller though. Wish I had bought two of these!
Jeffery ward
Reviewed in the United States on April 26, 2024
The media could not be loaded.
Zach Schinkowitch
Reviewed in the United States on September 27, 2023
This servo did everything my Reefs Triple 4 did and costs less than half the Reefs. This servo has gone through water, mud, sand, dirt, almost anything you can think of (except salt water). It has held up to getting in and out of binds. It has plenty of torque and speed to perform great with any crawler (and maybe other RC categories).
Colby jay
Reviewed in Canada on July 6, 2023
Huge upgrade on my arrma senton, a similar name brand one is 160 Canadian plus tax
Pernell DC
Reviewed in the United States on June 8, 2023
The media could not be loaded.
Customer
Reviewed in Canada on May 13, 2023
Pretty much as advertised. It is moderately high speed, moderately high power servo that fits 1/10 RCs. The value for money is excellent, but many reviewers state that they received broken product.Mine works great. It is on an 8th scale buggy and it never struggles to steer adequately. The servo has metal gears that produce a very high pitched metallic noise while in motion. It's actually kinda neat, very unique!If you want to buy it, make sure you test it under load during the return window!
Fade
Reviewed in Canada on January 17, 2023
Great servo, it was a good buy for the money.
RAKC
Reviewed in the United States on February 13, 2022
Initial tests are rather impressive. Installed now in the Element Enduro Knightrunner (aka scale tacoma). Tons better than stock servo or traxxas TRX4 upgrade servo. Much less costly than brand name servo so thought I would try it. Impressed so far.The fancy aluminum servo horn was useless to me because nearest hole for linkage too far out. Throws entire steering out of wack.Waterproofing was questionable because circuit board isn't coated, just a little piece of kapton tape. Case has seals if not a bit small but if machining tolerances of the case are even decent, should be fine. Grommet for wires siliconed in. So I coated the circuit board with the urethane based coating and resealed the grommet with silicone. Removed 1 star after finding board not coated.Will report back after some use, if servo proves itself on the trails like it is in testing, will be well worth every penny.
Deeznutz
Reviewed in Canada on November 6, 2022
Long time hobbyist, best Amazon servo available at present, outperforms and outlast all the other 25 and 35Kg Asian servos. Have several of these and all continue to work as described, mostly used at high voltage.
Melinda Crum
Reviewed in the United States on April 20, 2022
I installed this on my Element Gatekeeper after reading all of the positive reviews. I really didn't notice any increased torque compared to the rtr servo (13kg), which was pretty disappointing, but I decided that since it was faster than the rtr servo I would run it anyway. The servo has some sort of glitch that occurs where it will just randomly turn extremely quickly and bounce back to center. This makes it very hard to control and it happens often enough that it is definitely an issue. I would recommend spending your money elsewhere.