Your cart is empty.
Your cart is empty. With this brand new device, your bike light will shine closer towards the ground, making it more safe to ride at night.
It's very useful device and really easy to mount, as long as the fork has a hole, then you can install it.
Product pictures are sample pictures for the archmount, light and light bracket in pictures are not included.
Fit for folding bikes, moutain bikes, road bikes etc.
Size: 11x3x1.8cm Diamter: 23mm (Similar with handlebar diameter)
Weight:37g
Diameter:23mm
CE Certification; Quality system registered to ISO9001
Got a multimeter, will travel
Reviewed in the United States on March 19, 2025
Wonderful made in Taiwan.
Ellen Lee
Reviewed in Canada on July 20, 2020
Just the perfect thing for my headlights on my folding bike. I had one area left for it to screw into and it fits perfectly.
Great White North
Reviewed in Canada on December 26, 2020
Awesome, what can I say more, used it on MTB and Hybrid bikes with great success. Make sure there is enough room to mount it between fork and brakes if you have rim brakes, no problem at all with disc brakes
ashley a rihm
Reviewed in the United States on October 22, 2020
After many years of cycle commuting, I've noticed motorists not seeing my front (see me) lights when riding drop handlebar bikes with handlebar mounted lights. My hands and bars cover the lights at many angles. This product solves that problem, putting the light in a position away from handlebars so it's more visible form all sides. It is very durable, as I ride off road with it and it's still solidly attached after bumping on a rigid bike over moto trails with deep brake bump craters. I did have to source a longer mounting bolt from my local hardware store, as the base is far thicker than my fork's factory braze on bolt would accommodate. I have been carrying my high beam on my helmet, and have not tried mounting my heavier high beam light to this mount, but suspect it will handle weight fine, as long as the weight is well balanced and/or the light has a strong clamp.
vincent
Reviewed in the United States on August 31, 2019
it works like a charm but, the part that you mount the light should be a little wider for the Night rider line of lights/mounts (my night rider is really old soo Night rider may have changed the design), i had to force it to make it fit but other than that it works wonderfuly. be sure to measure the width of the mount you plan to use and compare it to the demensions they give you. i wish one of the photos on the amazon page showed the demensions that way you can compare. Other than that it is still holding strong after 300 + miles
BuyToReview
Reviewed in the United States on August 23, 2019
I bought this to center-mount a GoPro above my wheel but the mount bounces way too much, resulting in shaky footage. I wound up using it for a light mount and it still shakes but that's not a big deal for a light. The endcaps are cheap and fall right out so I recommend tape or rubber cement so you don't end up with a hollow tube that catches wind and whistles. Overall it's a good product for bicycle lights but it didn't work for my original plan. It is also abit expensive for what you're getting but it's the only one I've seen. If you're using it for a light or horn mount, I recommend this but if you want it for a camera mount then you should move on.
Ferengii
Reviewed in the United States on March 2, 2019
I couldn’t find anything like this bike light extender after long searches on the web, so this a useful, niche item. It won’t fit all bike lights, but it did work with my lights. (I wish the mounting “bar” would support a slightly wider attachment.). It is very solid, is easy to attach to the top of the fork, and has a good rubber gasket to keep everything solid. It meets my needs since I can’t mount my light on the handlebar because my handlebar bag blocks the light. For the minimal price, it does the job. It ships from China, so it took a couple of weeks to arrive.
Terry Crawford
Reviewed in Canada on November 5, 2019
It's works as advertised.
Richard Simmons
Reviewed in the United States on July 6, 2018
Positions my strap on headlight exactly where it needs to be. Just over the tire. So, the bean is not blocked by the tire or cables. Plus, the ground surface near the tire is illuminated.This is a much better alternative to handle bar headlight mounting. It puts your light pattern where you need it - on the riding surface.Only downside is shipping time. It comes by slow boat directly form China. Expect several weeks for delivery. It's worth the wait.
Stephen Ingraham
Reviewed in the United States on March 4, 2018
Wonderful accessory that turns any bike light into a fork mount headlight. Easy to install. Seems quite secure. It comes all the way from China after you order it...by China Post...but it came in about a week. Not bad. There does not seem to be any other product that does this job!
Alejo
Reviewed in Canada on March 18, 2018
Improves the look of the bike not having to set the light on handle bar
Larmur
Reviewed in Canada on April 18, 2018
Me permet d'utiliser un sac de guidon sans masquer la lumière. Emplacement bien protégé sur le vélo. Le cylindre est parfait pour diverses attaches de lumières. En plastique très solide. Se fixe facilement et fermement à la fourche. Donne en prime un petit air "classique" à mes vélos.
Jose L Herrera II
Reviewed in the United States on July 29, 2016
I ordered this mount because I wanted to get my bike light off the handlebar. IMHO, the mount gives my bike a very clean look, and helps put light where I need it. With proper aiming, I no longer worry about seeing the road at night, or being visible in the daytime. The product does have a sturdy feel to it, and it's a simple design, yet so useful. I plan to order another one, but with the M6 bolt, to install on my hybrid bike.
Recommended Products