Your cart is empty.
Your cart is empty.♥ Steve H ♥
Reviewed in the United Kingdom on September 20, 2024
Very simple to install and works well as a mount for the wahoo bike computer
Andrew Brown
Reviewed in the United Kingdom on September 13, 2024
This gold top cap cycle computer mount looks great on my bike, and holds my cycle computer exactly where i need it. The Gold anodising looks really good quality and the plastic computer mount fits perfectly.
Syyyyyyyyyy
Reviewed in the United Kingdom on August 29, 2024
I recently built e-bike. didn’t have an LCD on it so therefore an external one was needed to show speed.My CYCPLUS GPS had no problems fitting on here at all, staying firmly attached unless removed correctly.The quality of the cap is good; Super easy to install and leaves the cycling computer in a good position to read properly.
Randy
Reviewed in the United States on July 3, 2024
This mount is made well and easy to install. That said, I've found I don't like mounting the computer in the place of the stem cap. Firstly, it's easier to see if mounted further forward. Having to look straight down to see the computer takes the eyes off the road more that if the computer were mounted further forward. Secondly, mounted at the stem cap, the computer is vulnerable to being struck by a knee when sprinting or climbing out of the saddle. Thirdly, sweat pours down on the computer in this location.
Jessica Averett
Reviewed in the United States on July 3, 2024
This bike computer mount was really easy to install, but the plastic piece snapped after one crash. I could understand if it was a hard crash, but my bike just slid out on a corner and it essentially laid down, and the plastic piece of the mount snapped in half, making the whole thing worthless now. It looked promising, but if the plastic breaks this easily, it's not worth it.
Scott S. Cottle
Reviewed in the United States on June 21, 2024
It worked for my Wahoo without paying up the wazoo.
CampVibes
Reviewed in the United States on March 26, 2024
It's fairly priced and fit into my stem like a stem cap perfectly. It's compatible with my CooSpo cycling computer and the gold color makes them match. Went for a ride on the gravel bike and it stayed on.I got this because I wanted my CooSpo on my stem rather than on my handlebars where I already have my phone mount and light.Overall, I'm happy with this and would recommend this if a stem-mounted cycling computer option is what you're looking for.
Mike W.
Reviewed in the United States on February 27, 2024
KREMORV makes some of the best mounts that I have used, I use them commonly and have tried just about each type that they offer. This top cap mount is no different in that it is a fantastic aluminum alloy mount, attaches quickly to your top cap and can mount the Wahoo or Garmin style mounts (to attach a garmin, you simply change the rotation of the internal plate).This type of mount is perfect for those that want their computer tighter to the stem of the bike rather than extending in a front-mount position. I find this most valuable on MTB bikes as you don't want to have anything protruding past the handle bar in the event you might hit a tree or otherwise. Normally on a road / gravel bike I prefer the out front mount.Either which way for the price point you cannot go wrong with this mount. It's solid, it works incredibly well and you'll be hard pressed to find a better quality mount for the price point.
Amazing Customer
Reviewed in the United States on February 25, 2024
I originally got the Kremorv adjustable stem mount to mount my Wahoo bike computer (which usually resides on my road bike) on my new mountain bike. That mount was a very nice mount (see my review) but I ended up switching to this Kremorv stem cap mount because of the adjustable version didn't quite match up with my stem spacer diameter.This mount solved all my problems. It's a perfect fit for my bike and looks very clean when my Wahoo isn't mounted. You really don't even notice that it's a mount. The computer twists into the mount with a satisfying click--it's not difficult to mount/unmount the computer, but the positive detent in the mount gives you confidence that the computer isn't going to shake loose. The mount is nicely machined with no sharp edges or areas that make you question the quality.Because this mount replaces your stock stem cap, you'll have to remove the plastic computer mount insert in the middle of the mount (it would have been nice if they included the necessary hex wrench), unbolt your stock stem cap, bolt the lower portion of this mount onto your stem in lieu of your stock stem cap, then re-attach the plastic computer mount insert. It's a little bit fiddly because the lower portion of the mount can rotate 360 degrees just like any stem cap, but once you re-attach the plastic insert, you no longer have access to the stem cap bolt to loosen it and fine tune the orientation of the mount. If you want your computer perfectly perpendicular to your bar, you'll have to futz with it a little. Thankfully you'll only need to do this once.What I found worked best is to install the new mount stem cap but not fully torque it down (leave just enough play that you can rotate it slightly), re-install the plastic computer mount insert, attach your computer and then straighten the mount so it's oriented just how you want it. You then have to remove your computer, remove the plastic insert, and torque down the stem cap bolt. The only trick is that when you try to turn your computer counterclockwise to remove it, the stem cap mount will want to rotate. I solved this by wrapping some tape around stem cap mount and the stem spacers below it on my bike, then I was able to hold onto both with one hand while removing the computer with the other.If I had designed this mount, I would have tried to put a hole in the center of the plastic insert so that you can insert the hex wrench through the plastic insert while it's in place and loosen/tighten the stem cap bolt without having to remove the insert. I don't think a small hole the size of the hex wrench would have compromised the integrity of the insert. You could probably even make this modification on your own with a drill if you are so inclined.
H. Holzapfel
Reviewed in Germany on November 17, 2024
Einfach zu montieren, integriert sich in den Lenker und hält Bombenfest. Auch auf Feldwegen kein klappern und vibrieren.
Adam Bowie
Reviewed in the United Kingdom on October 15, 2024
This neat little device allow you to mount your bike computer directly on top of your stem's top cap.You unscrew the two little bolts holding the bike computer mount, and then replace your existing top cap with the one provided. Re-attach the computer mount and you're ready to go. Great if you want a minimalist design or don't have standard mounting options.The only real issue I had is that some top cap bolts are wider than others, and I found one bolt that was too thick for the included top cap. It would need drilling out to fit. And I'm not sure that I'd use this as a mount-point for an MTB. I think having a bit of give from an out-front mount would be better for the bike computer. But otherwise a smart and useful device.
J. Kramer
Reviewed in the United States on April 9, 2024
This stem cap mount frees up bar space on my gravel bike. While it's a minor plus, I also like that my computer is centered. This mount is advertised for the Wahoo Element, but the interface is pretty standard among computers. The mount works perfectly with my Cycplus computer.Simple installation:-Use a 2mm allen wrench to remove the two bolts holding the plastic mount piece to the metal headset cap.-Swap out the old cap for the new cap with a 5mm allen wrench.-Reattach the mount piece to the cap with the two small screws and your 2mm allen wrench.The computer twists & clicks into place just like with the regular mount. I'm happy with the design & quality. I don't anticipate any issues, but I'll update my review if anything changes.
C.S. Review Guy
Reviewed in the United States on April 30, 2024
This is marketed as a mount for Wahoo, but as others have mentioned it works for any computer using this mounting style, with adjustment needed only by turning the mount to the proper direction. Even in one of the marketing photos, it's installed for a Garmin and not Wahoo mount. Either way, the materials are very nice and it is quite sturdy once properly installed. This beats using the Garmin mount, secured with straps, on top of your stem. Great piece of kit!
Recommended Products
