Your cart is empty.
Your cart is empty. Specifications:
Bar End Mirrors Never installed
Mirror Color:Smoke Blue;Bolt Color:Black
Quantity:1 SET (Left & Right)
Body Material:Aluminum with Black Finish
Package Included:
1 set(Left & Right)Comes with 7/8" Bar end insert rubber bushing or directly Clamp-on up to 1" bars
Fitment:
Will fit any Motorcycle, Street bikes, Sports bikes, Chopper, Cruiser with 7/8" or 1" Standard Handlebars
Fit for all motorcycles or bike's if it uses standard hollow 7/8 inches diameter handlebars:
for Harley Davidson
1995-1997 Bad Boy;2011-2013 Blackline;2013-2014 Breakout;2010-2011 Cross Bones;
2014 CVO;1995-2014 Dyna most of model;2013-2014 Electra Glide;
Compatible with Honda:
Street bike : CB1000R / CB1300 / CB600F Hornat / CBF600 / CBR125R / CBF125
Cruiser and chopper : Shadow / Valkyrie / Magna / Rebel
Dirt bike : XL1000V / XL700V / NT700V / XL125V / XR230 / APE50
Scooter: Silver wing / Jazz / Reflex / Forza / SH / PS
Compatible With Kawasaki:
Street bike : Z1000 / Z750 / ER-6F / ER-6N
Cruiser and chopper: VN series
Dirt bike : Versys / KLX series
Compatible Wth Suzuki:
Street bike : B-King / GSF1250 / GSF600 / Gladius SFV650 / SV650 / SV1000 / GSR600
Cruiser and chopper : Boulevard / Intruder / Volusia
Dirt bike: V-Strom / DR series
Scooter: Skywave / Burgman series / Gemma
for Yamaha:
Street bike : XJR1300 / XJ6 / V-max / MT-01 / MT-03 / TDM900 / FZ1 / FZ6 / YBR
Cruiser and chopper: XVS950 / XV1900 / XVS1300 / V-Star / Virago / Warrior / Royal Star
Dirt bike : XT660 / WR250 / WR125 / XT125
Scooter: Majesty / X-Max / X-City
D
Reviewed in the United States on February 2, 2025
There’s a lot of reviews saying these won’t fit their bike. I didn’t use the bar end I just clamped the mirrors straight to my 7/8” bars and they look great. Plenty of field of view and very sturdy.
Alan
Reviewed in Australia on February 16, 2025
Item arrived broken
steven
Reviewed in the United States on January 25, 2025
These truly are universal. The people who say they don’t fit and are too big should not be riding. They clearly aren’t smart enough to figure out there are two sleeves. The larger sleeve fits over the smaller sleeve so if you have a smaller hole just remove the larger outer sleeve and voila it works. The mirrors look great and install in less than 5 minutes.
Aaron
Reviewed in Canada on September 2, 2024
Been using them for months no problems
Grant
Reviewed in Australia on September 14, 2024
2nd set ive had to purchase as a car knocked my bike over but these look the business and stay where you put them. Same as all bar end mirrors they are aesthetics over practicality..
Miguel
Reviewed in the United States on August 10, 2024
If I can save someone $25 by telling them not to buy these then I will. These mirrors already fit wonky and I had to cut into my grips to make them fit. Even then the screw got stuck in its own housing and ended up snapping when I tried to get it unstuck. You get what you pay for, don’t buy these mirrors. I wanted to like them and was so exited to put them on and get rid of the stock mirrors but they did nothing but ruin my day and pretty much ruined my whole next week because I have to wait for another set of mirrors to come in the mail since these Hong Kong Chinese sweatshop ones broke. Don’t buy them, I can’t repeat this enough. DONT BUY THEM
Wesley Semrok
Reviewed in Canada on May 30, 2024
Rear view mirrors are decent, however mine had a slight distortion on the right hand mirror. They also could be a touch larger. They at least stay where you want them. If they didn't have to distortion, I would 4 stars, and just a touch larger, 5 stars.
Rylan Grant
Reviewed in the United States on October 1, 2024
They look amazing and you can see pretty well out of them. The only issue I had was with the stripping of the bolts I barely barely put any pressure on this bolt and it started stripping the bottom half of the circular clamp for the mirrors I just wish there was a little more quality in the bolts/threads. I believe it’s a plastic like material that looks like metal maybe change it to a harder metal? Overall they look great and are durable the road vibrations don’t make them budge at all even with one of the screws being stripped out
Customer
Reviewed in Canada on July 4, 2022
There was black glue pushing out the inside corders of mirror so it wasn't a clear and clean mirror. Metal seemed fine, but mirror portion looked scratched and worn. Very low quality. My brother got the black version of these and they came from a different mfr, they looked great.
Keith
Reviewed in the United States on July 30, 2022
Excellent product. I was going to buy the KTM bar end mirrors that look just like these ($99) per mirror; but they were back ordered so I went with these instead. I couldn’t be happier! The install took all of 3 minutes, and two of those minutes was simply figuring out how I wanted the bracket to sit on the handle bar. My photo in the review is the placement I went with, so I hope it helps anyone looking to see how it sits on a 390 Duke.The mirrors themselves are super-sturdy and do not feel cheap in the slightest sense. My mirror does not vibrate excessively while at riding/highway speed, which I feel is even better than the already good stock mirrors that came with the bike in this regard. I had a CRG bar end on my last motorcycle and this mirror vibrates as little as the CRG did. I did only install my left side mirror, so please note that this review is simply for my left mirror installed and not for the pair. I DID NOT use the hardware and weight provided with the mirror, but instead used the KTM stock hardware and weight. There is plenty of length on the stock screw for this to work.This is a great addition to my Duke, cleans up the nice aggressive lines of the bike that I feel the stock mirrors didn’t accent, but took away from.**Here are the mirror deletes I also bought and they too were amazing. Most delete plugs you’ll find are actually just plastic and scratch super easy. This set below are metal and powder coated so when I installed them, no paint flaked off whatsoever. I spent quite awhile researching good plugs, so hopefully this helps anyone looking and saves them some time. Our KTMs have both a “left” and “right” screw pattern on the OEM mirror holes and this pack comes with 2 of each.FENRIR Motorcycle mirror Hole... https://www.amazon.com/dp/B09MYBLFGD?ref=ppx_pop_mob_ap_share
Justin stockert
Reviewed in the United States on June 24, 2022
This set of mirrors was not very well directed because i don’t have ahlf a braincell when iT comes to installing accessories, but after some messing around and getting the grom handlebars apart with my brother, the end result looked good and didnt vibrate too much, even at high rpm. Stoock mirrors looked like they belonged on a moped and were unusable at speed. These are just right and they get you what you need. Without that circular mirror look... this is exactly what i hoped for. Just the only problem is that i was about to return them because without a proper video guide, i had problems trying to install the ends. It all worked out tho
Mike Ducharme
Reviewed in the United States on June 22, 2022
[Short term review - I just got them yesterday] Fitment is totally figured out. The bar-end mounts are really nice, but may not fit most aluminum bars unless you can machine them down... which I can. But the hinged clamps fit the 7/8" (22.2mm) bars and work beautifully. Clear, solid, no fuzzy view or vibration (even on a Ducati). Easy install and great results for peanuts.
Matt Cassel
Reviewed in the United States on October 7, 2022
I put these on a 2022 KTM Duke 390. The mirror on the clutch side fit perfectly and had no issues. The mirror on the throttle side was defective, slightly warped and rubbed against the throttle. By tightening the mirror, it stuck the throttle in place. If the bolt for the bar end wasn't tightened all the way to the handlebars, the mirror would spin and rotate freely. I took it off and dug out some washers and tried that-- it took 3 washers to space it far enough away from the throttle from the slight twist in the ring clamp. Once I tightened it, the mirror still easily moved around the bar end because the manufacturing defect prevented it from getting a solid hold. I tried to tighten it a half turn more and the ring exploded into pieces.These need some sort of spacer for the throttle side because the bar snugs up against the throttle body. Other reviews say there are spacers included, but mine did not have them. Should have spent more money on something quality and not cheap "steel."
Recommended Products
