Your cart is empty.
Your cart is empty.For use with ATO or ATC fuses Supplied with 12 AWG pigtails 30A Maximum fuse amperage For use with Blue Sea Systems' ANL Fuse Blocks.
David
Reviewed in the United States on August 13, 2024
Great fuse holder. Easy to wire.
Bamaguy4950
Reviewed in the United States on July 20, 2024
I use Blue Sea Systems for all critical electrics on my boat. Highly recommend👍
Aaron Krapf
Reviewed in the United States on May 17, 2024
Arrived promptly and has worked great since installing.
Southern Charm
Reviewed in the United States on January 20, 2024
I got this for a fuse that is exposed to the elements and was continuously blowing in the OEM holder that was supposed to be waterproof. Since changing to this, I’ve had no issues at all. Works well. I soldered the connections and shrink wrapped them.
Louienova
Reviewed in Canada on January 12, 2024
Looks like fair quality
Brutally Honest Reviews
Reviewed in the United States on December 2, 2023
Good fitting fuse holder with copper wire.
Marc Austin
Reviewed in the United States on May 11, 2022
Everything Blue Sea makes is quality, no exception here. Quality of this holder is 2nd to none. Using it for a backup bilge pump on my bass boat
AppFan28
Reviewed in Germany on March 26, 2021
Ich bin mit allen Artikeln von Blue Sea Systems bisher sehr zufrieden. Material und Verarbeitung wirken wertig und in der praktischen Anwendung gab es bislang keine Probleme. Würde ich wieder kaufen.
Bruce W.
Reviewed in the United States on August 6, 2019
I needed to replace some bad fuse holders on my so-called "marine" and "waterproof" charger (a ProMariner ProSport 12). The holders on the charger were junk, but these holders do a very nice job by comparison. Like any piece of electronic gear subject to a salt water marine environment, coat the fuse blades with TefGel or some other form of dielectric grease before installing, and do the same thing with the crimp butt connectors. Also, don't forget to heat shrink the connectors to stop corrosion. Overall I am quite satisfied with the quality of these fuse holders.
JGaitie
Reviewed in Canada on July 30, 2018
Nice unit, well built, easy installation.
riceguy
Reviewed in Canada on May 13, 2018
Well made. The cap fits snug onto the ribbed orange rubbery insert and clips closed as well. The screw hole is a nice feature. The wires are 12 gauge and thick, probably thicker than needed but not an issue. There's about 6 inches on both ends, so plenty enough.
OpenTrackRacer
Reviewed in the United States on December 6, 2017
I had a bunch of blade fuse holders around and they were all generic with questionably labeled wire gauges. After melting the latest one with a 25A load I decided I needed something better. This is it. The wires are heavy enough to support the load and the hold is of good quality and seals well. Time will tell but I believe this will be the last time I have to worry about trouble with the fuse holder on this circuit.
Ric Perry
Reviewed in Canada on November 11, 2017
+++AAA , perfect, thank you !!!
Recommended Products
